Abstract:Li-metal batteries have the potential to become the next generation of batteries since they can provide an increased energy density vs. Li-ion batteries. However, the safety issue caused by the inhomogeneous Li deposition and Li dendrite growth greatly limits their commercial application. Several methods have been proposed to address this issue. On the one hand, when Li ions are released from one electrode and consumed at the other electrode, it causes a salt concentration gradient. Besides, the electrical migration of anions in the opposite direction aggravates the concentration of gradient since anions do not react at the electrodes. Fast dendritic growth then occurs when the current is high enough to fully deplete the Li+ ion at the anode during charge. Thus, suppressing concentration gradient by immobilizing the anions would in principle solve the fast dendritic growth issue. On the other hand, the Solid Electrolyte Interphase (SEI) plays a crucial role in the operation of Li metal batteries since it prevents further reduction and continuous electrolyte reaction. SEI derives from the passivation layer formed onto the surface of Li metal under dry air during lithium foil extrusion and then evolves further in contact with the electrolytes and during subsequent electrochemical Li stripping/plating. The SEI is inhomogeneous and since it contains lower resistance pathways for Li+ transport, it favors inhomogeneous deposition at any current. Thus, SEI engineering, in order to favor the homogeneity of current density and enhanced mechanical properties to confine lithium could, in principle, improve the performance of Li metal batteries. Thus, we studied the use of single-ion conducting polymers with high cationic transference numbers (tLi + close to 1) as artificial SEIs (art-SEIs) since they include immobile anions and thus prevent Li+ depletion during charge and, at the same time, improve lithium metal confinement and the homogeneity of current density. Our results show much improved homogeneity of Li deposition and cycling stability after single-ion art-SEI coating using an ether-based liquid electrolyte combined with a separator. Nevertheless, it could not enable long-term cycling as the separator does not enable homogeneous pressure and current density onto the lithium anode. Thus, the use of a single-ion conducting solid polymer electrolyte was combined with a single-ion conducting art-SEI (as illustrated in Figure 1). This strategy allows the suppression of salt concentration gradients, inhomogeneous pressure and current density, thus enables homogeneous Li deposition and long-term cycling of Li metal anode. Figure 1

Spatially Confined LiF Nanoparticles in an Aligned Polymer Matrix as the Artificial SEI Layer for Lithium Metal Anodes

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Polylatic Acid Nanofiber-Guided Uniform Lithium Deposition for Stable Lithium Metal Anodes

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

In-situ construction of hybrid artificial SEI with fluorinated siloxane to enable dendrite-free Li metal anodes

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

Artificial Single-Ion Conducting Polymer Solid Electrolyte Interphase Layer toward Highly Stable Lithium Anode

Artificial SEI Layer Combined with Single-Ion Polymer Electrolytes to Prevent Dendrite Growth in Lithium Metal Batteries

In Situ Formation of Polycyclic Aromatic Hydrocarbons as an Artificial Hybrid Layer for Lithium Metal Anodes

An Artificial Solid Electrolyte Interphase with High Li‐Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Boosting stable lithium deposition via Li3N-Enriched inorganic SEI induced by a polycationic polymer layer

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes

Self-Assembly Monolayer Inspired Stable Artificial Solid Electrolyte Interphase Design for Next-Generation Lithium Metal Batteries

A polythiourea protective layer for stable lithium metal anodes

A polymer brush-based robust and flexible single-ion conducting artificial SEI film for fast charging lithium metal batteries

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Multifunctional Artificial Solid Electrolyte Interphase Layer for Lithium Metal Anode in Carbonate Electrolyte

SiO2 Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Manipulating the diffusion energy barrier at the lithium metal electrolyte interface for dendrite-free long-life batteries