Abstract:Graphene quantum dots (GQDs) have received great interest in the past few years due to its unique properties such as the quantum confinement and edge effects when their sizes are down to 10 nm. These new physical properties can induce size-dependent bandgap, and unique optical and electronic properties, which make them excellent materials for photovoltaics and photoelectochemical (PEC) devices. In a dye-sensitized solar cell (DSSC), light harvesting capability of dyes could be enhanced by Förster resonance energy transfer (FRET) phenomena, wherein energy is transferred from an excited donor fluorophore to a suitable acceptor dye molecule. The strict requirement that the overlap of the emission spectrum of donor and absorption spectrum of acceptor, which also requires proper band edge alignment between the them, significantly limits the variety of donors and acceptors suitable for the FRET-based DSSCs. In our DSSC work, graphene quantum dots were co-sensitized with N719 dyes and we successfully explored that the GQDs is a suitable donor material for the N719 dyes. From the emission and time decay spectra analysis, the FRET efficiency was measured to be 27 %. The power conversion efficiency ( ƞ) of the standard DSSC is 6.12 % with a short-circuit current density ( J sc ) of 12.74 mAcm -2 and open-circuit voltage ( V oc ) of 760 mV. The co-sensitization of GQD greatly enhances the ƞ up to 7.96 % with a J sc of 16.54 mAcm -2 and V oc of 770 mV. The co-sensitization of GQDs improved both the J sc and ƞ values by ~ 30 %. The FRET enhanced the overall light absorption capacity of the N719 dye and hence photocurrent generation of the DSSC. Moreover, the co-sensitization of GQDs increase the TiO 2 /dye/electrolyte interface resistance, which suppresses the charge recombination and leads to increased V oc value. For PEC water splitting, higher light absorption can also be achieved by utilizing light-matter interplaymechanisms, such as, surface plasmon resonance (SPR), plasmonicresonance energy transfer (PRET) and exciton−plasmon interactions (EPI). The optical properties of the semiconductor and metal nanoparticles (SNPs-MNPs) are strongly modified via EPI comparing to single NPs. Therefore, we have utilized the unique combination of GQDs and AuNPs (SNPs-MNPs) to effectively enhance PEC performance of TiO 2 nanorods (TNRs). The AuNP-GQD decorated TNR photoelectrode has achieved a superior PEC performance with a photocurrent density of 1.75 mAcm -2 at 1.23 V vs RHE, which is one of higher value obtained in PEC measurement using TiO 2 nanorods due to an efficient utilization of solar light. The experimental analysis has indicated that the AuNPs has contributed to the PRET / SPR-mediated hot electron injection into TiO 2 and the GQDs contributed to the improved electron injection into the TiO 2 . Moreover, the significantly improved PEC water splitting efficiency is attributed to the synergistic effect due to EPI and/or FRET between AuNPs and GQDs in addition to the good catalytic property of the AuNPs and the GQDs.

Enhanced dye-sensitized solar cell performance using Ag nanoparticle-decorated TiO2 nanowire photoanode using the GLAD technique

Photo-assisted Deposition of Ag Nanoparticles on Branched TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells with Enhanced Efficiency

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Nano-silver incorporated amine functionalized graphene oxide titania nanotube composite: a promising DSSC photoanode

Enhanced visible light harvesting in dye-sensitized solar cells through incorporation of solution-processable silver plasmons and anthracite-derived graphene quantum dots

Ag nanoparticle-decorated SiO2@TiO2 hierarchical microspheres improve the efficiency of dye-sensitized solar cells

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell

Enhancement of Natural Dye-Sensitized Solar Cell Efficiency Through TiO2 Hombikat UV100 and TiO2 P25 Photoanode Optimization

Study of How Photoelectrodes Modified by TiO2/Ag Nanofibers in Various Structures Enhance the Efficiency of Dye-Sensitized Solar Cells under Low Illumination

TiO2-Ag AND NATURAL DYE CO-PIGMENTED WITH SALICYLIC ACID FOR DYE-SENSITIZED SOLAR CELL (DSSC) APPLICATION

Glancing angle deposited titania films for dye-sensitized solar cells

Effect of Ag Doping on the Glancing Angle Deposition Synthesized TiO₂ Nanowire for Enlarged Photodetection

A Double Layered Photoanode Made of Highly Crystalline Tio2 Nanooctahedra and Agglutinated Mesoporous Tio2 Microspheres for High Efficiency Dye Sensitized Solar Cells

Fabrication of an efficient amino substituted 1,4-naphthoquinones sensitized TiO2 nanograin based dye sensitized solar cells

Light absorption enhancement in dye-sensitized solar cells using thin nanostructured photoelectrodes

High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes

(Invited) Light Absorption Enhancement Using Graphene Quantum Dots in Dye-Sensitized Solar Cells and Photoelectrochemical Water Splitting