Abstract:The traditional isolation devices often encounter challenges such as uncontrolled deformation in the isolation layer, limited vertical tensile capacity, and environmental risks associated with the use of lead, a heavy metal. This study investigated an innovative low-yield-point steel damper called the corrugated pipe damper (CPD), which was introduced into a seismic isolation layer to overcome the limitations of conventional dampers. To investigate the behavior of the CPDs under cyclic loading, 10 specimens were designed and subjected to quasi-static cyclic loading and fatigue loading. The failure modes, hysteretic curves, stiffness degradation, and energy dissipation capacity of the specimens were obtained. Results indicated that the CPD exhibited good horizontal deformation and energy dissipation capacities, and excellent seismic fatigue performance. The horizontal force-displacement curves exhibited obvious yielding and strengthening phenomena, with the displacement increasing gradually, the bearing capacity increasing rapidly at the beginning, decreasing significantly after yielding, and increasing rapidly when the displacement was large. As the height increased or the average diameter decreased, the bearing capacity, horizontal stiffness, and hysteresis energy decreased, whereas the yield displacement increased. Finite element models were subsequently validated using experimental data and developed to simulate the horizontal cyclic behavior of the CPDs. Based on the finite element analysis, the connection construction and improvements for CPDs were analyzed and recommended while also revealing the relationships between the vertical additional force and horizontal displacement, and the prediction equations for some mechanical performance indexes of the CPD were proposed by detailed parametric analysis.

Analytical and Numerical Study of the Cyclic Behavior of U-Shaped Yielding Dampers

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

The Effects of Dynamic Loading on Hysteretic Behavior of Frictional Dampers

Cyclic response and mechanical model of a rotational viscoelastic damper

Shape optimization of U-shaped damper for improving its bi-directional performance under cyclic loading

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Experimental and Numerical Study on an Innovative Trapezoidal-Shaped Damper to Improve the Behavior of CBF Braces

Mechanical Modeling of Viscous Fluid Damper with Temperature and Pressure Coupling Effects

Experimental study on lateral performance of slotted U-shaped steel damper

Effective Stiffness and Damping Analysis of Steel Damper to Lateral Cyclic Loading

Modeling of a viscoelastic damper and its application in structural control

Stepwise Hardening Model For The Cyclic Behavior Of Shear Panel Dampers

Cyclic behaviour of a novel torsional steel-tube damper

Hysteretic Performance Test and Simulation Analysis of A New Type of Mild Steel Damper

Experimental Study of Viscoelastic Dampers under Large Deformation

Three-dimensional behavior of a pure bending yielding damper

Experimental and numerical study of low-yield-point steel corrugated pipe dampers

Experiments and numerical prediction on a new type of mild steel damper with separable phase yielding

An innovative two-level yielding knee-braced frame with deformation-controlled ring damper

Experimental Study on Mechanical Properties of Shear Square Section Steel Tube Dampers

Optimal design for working clearance of rotary MRF dampers