Abstract:Summary CO2 huff ‘n’ puff is a promising enhanced oil recovery (EOR) technique for tight/shale reservoirs, also enabling CO2 geological storage. However, the effectiveness of this method can be significantly affected by the aqueous phase resulting from connate water and hydraulic fracturing. The mechanism underlying the influence of the aqueous phase on oil recovery during CO2 huff ‘n’ puff, as well as the corresponding stimulation methods in such scenarios, remain unclear and warrant further study. To investigate this, we utilized a nuclear magnetic resonance (NMR) instrument to track the movement of fluids during CO2 huff ‘n’ puff under water invasion conditions. The impact of the invaded aqueous phase on oil recovery was examined, and the impact of different treatment parameters was explored. The results show that the aqueous barrier formed by water invasion alters the pathway of CO2 diffusion to matrix oil. This alteration leads to a diminished concentration of CO2 in the oil phase, which, in turn, results in a substantial reduction in oil recovery. Consequently, the performance of CO2 huff ‘n’ puff is highly sensitive to the water phase. Nevertheless, the oil recovery dynamics in cyclic CO2 huff ‘n’ puff under water invasion exhibit distinctive patterns compared with those without water invasion. These differences manifest as notable low oil recovery in the first cycle, followed by a rapid increase in the second cycle. This behavior primarily arises from the expulsion of a significant portion of the invaded water from the macropores after the first cycle. However, the effectiveness of this mechanism is limited in micropores due to the challenging displacement of trapped water in such pores. Raising the injection pressure mainly boosts oil recovery in macropores, with minimal response in micropores. Yet, the achievement of miscibility does not lead to a substantial improvement in the CO2 huff ‘n’ puff performance, primarily due to the constraints imposed by the limited CO2 dissolution through molecular diffusion Additionally, we have proposed three stimulation mechanisms achieved by lengthening the soaking time under water invasion conditions. First, the prolonged soaking time increases the concentration of CO2 molecules that diffuse into the matrix oil. Second, it promotes the imbibition of the trapped water on the fracture surface into the deeper matrix to alleviate water blockage. Finally, the invaded water in macropores displaces oil in micropores by capillary force during the soaking period.

Resonance-Enhanced Pulsing Water Injection for Improved Oil Recovery: Micromodel Experiments and Analysis

Experimental characterization and mechanism of hydraulic pulsation waves driving microscopic residual oil

Pore-scale Experimental Study on EOR Mechanisms of Combining Thermal and Chemical Flooding in Heavy Oil Reservoirs

Study on Microscopic Water Flooding in Porous Carbonate Reservoirs by Numerical Simulation

Enhanced oil recovery mechanism of low oxygen air injection in high water cut reservoir

Study on frequency optimization and mechanism of ultrasonic waves assisting water flooding in low-permeability reservoirs

A technique for enhancing tight oil recovery by multi-field reconstruction and combined displacement and imbibition

Experimental Investigation of Silica-Based Nanofluid Enhanced Oil Recovery: the Effect of Wettability Alteration

Pore-Scale Oil-Water Flow Behaviors in Different Development Adjustment Schemes for Enhancing Oil Recovery in Waterflooding

Enhanced Oil Recovery Mechanism and Recovery Performance of Micro‐gel Particle Suspensions by Microfluidic Experiments

Experimental Study on the Efficiency of Fracturing Integrated with Flooding by Slickwater in Tight Sandstone Reservoirs

Insights into Enhanced Oil Recovery by Polymer-Viscosity Reducing Surfactant Combination Flooding in Conventional Heavy Oil Reservoir

Research on the application of molecular simulation technology in enhanced oil-gas recovery engineering

The effect of nanoparticles on wettability alteration for enhanced oil recovery: micromodel experimental studies and CFD simulation

Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

A new three-dimensional effective water-flooding unit model for potential tapping of remained oil in the reservoirs with rhythmic conditions

Polymer-Enhanced Foam PEF Injection Technique to Enhance the Oil Recovery for the Post Polymer-Flooding Reservoir

Mechanism of Enhanced Oil Recovery for In-Depth Profile Control and Cyclic Waterflooding in Fractured Low-Permeability Reservoirs

CFD Analysis of Pore Morphology, Gravity, and Fluid Characteristics Influences on Water Flooding Process

Insights into the Microscopic Oil-Water Flow Characteristics and Displacement Mechanisms during Waterflooding in Sandstone Reservoir Rock Based on Micro-CT Technology: A Pore-Scale Numerical Simulation Study

Investigating the Impact of Aqueous Phase on CO2 Huff ‘n’ Puff in Tight Oil Reservoirs Using Nuclear Magnetic Resonance Technology: Stimulation Measures and Mechanisms