Oil Removal Technology for Water Injection in Low-Permeability Reservoirs: A Micro-Vortex Flow Approach

Dawei Zhao,Weihong Xie,Jingyi Zhu,Bing Li,Lirong Wang,Tao Chen,Yuxin Sheng,Xiujie Huang
DOI: https://doi.org/10.3390/pr12061092
IF: 3.5
2024-05-27
Processes
Abstract:Gravity settling is a widely employed technology that removes oil from produced water in oilfields. However, with the transition of reservoir development to low-permeability reservoirs, conventional produced water settling tanks face limitations in the treatment efficiency and coagulant dosage. This study presents an innovative approach that optimizes sedimentation tank structures and integrates micro-vortex flow technology to enhance coagulation and flocculation. Through chemical dosage experiments, comparative experiments, and long-term observation, the micro-vortex flow reactor demonstrates a 9.4% increase in oil removal efficiency while reducing the coagulant dosage by 30.0%. The MOR equipment achieved a 20.5% higher oil removal efficiency than conventional methods while maintaining effluent oil and suspended solids below 20 mg/L. The long-term observation experiment of MOR equipment further highlights oil removal efficiency of 94.2% and the micro-vortex reactor's excellent anti-pollution performance. The MOR equipment significantly reduces the land occupancy area by over 50% compared to conventional methods, thanks to the implementation of micro-vortex flow technology that effectively addresses the limitations associated with traditional settling tanks. This study contributes to advancing efficient and sustainable practices in waterflooding reservoirs, particularly for meeting stringent standards of water injection in low-permeability oilfields.
engineering, chemical
What problem does this paper attempt to address?
This paper aims to solve the problems of low oil - water separation efficiency and large amount of coagulant used in the water injection process of low - permeability reservoirs. Specifically, traditional physical methods are not effective in removing emulsified oil, and chemical methods have the problem of incomplete reaction during the coagulation reaction process. In addition, the filtration process has certain requirements for the oil content in the influent. Therefore, the paper proposes a new oil - water separation method based on the micro - eddy current technology to improve the oil - water separation efficiency, reduce the amount of coagulant used, and meet the strict water quality requirements for water injection in low - permeability reservoirs. ### Main research objectives: 1. **Improve oil - water separation efficiency**: By optimizing the structure of the sedimentation tank and integrating the micro - eddy current technology, enhance the coagulation and flocculation effects and improve the oil - water separation efficiency. 2. **Reduce the amount of coagulant used**: By improving the contact efficiency between the coagulant and oil droplets, reduce the amount of coagulant used and lower the treatment cost. 3. **Meet the water quality requirements for water injection in low - permeability reservoirs**: Ensure that the oil and suspended solid contents in the treated water are less than 20 mg/L, meeting the strict standards for water injection in low - permeability reservoirs. 4. **Reduce the floor area**: By implementing the micro - eddy current technology, significantly reduce the floor area of the equipment and improve the space utilization efficiency. ### Research background: - **Characteristics of low - permeability reservoirs**: The permeability of low - permeability reservoirs is relatively low, usually between 0.5 and 10.0 mD, resulting in limitations in the treatment efficiency of traditional oil - water separation methods. - **Deficiencies of existing methods**: Traditional methods such as natural sedimentation method, inclined plate (tube) technology, coagulation technology, air - flotation separation technology and hydrocyclone technology have limited effects in removing emulsified oil and colloidal substances, and they also have large floor areas and long treatment times. - **Advantages of micro - eddy current technology**: The micro - eddy current technology forms small - scale eddies in local areas, enhances the contact efficiency between the coagulant and oil droplets, improves the oil - water separation effect, and reduces the amount of coagulant used at the same time. ### Experimental methods: - **Chemical dosage experiment**: Determine the optimal amount of coagulant through experiments. - **Comparative experiment**: Compare the micro - eddy current reactor with traditional methods to evaluate its performance. - **Long - term observation experiment**: Verify the stability and continuous effect of the micro - eddy current reactor through long - term operation. ### Experimental results: - **Improvement in oil - water separation efficiency**: The oil - water separation efficiency of the micro - eddy current reactor has increased by 9.4%. - **Reduction in the amount of coagulant used**: The amount of coagulant used has been reduced by 30.0%. - **Outlet water quality meeting the standard**: The oil and suspended solid contents in the treated water are both less than 20 mg/L. - **Reduction in floor area**: The floor area of the equipment has been reduced by more than 50%. ### Conclusion: The micro - eddy current technology performs excellently in improving the oil - water separation efficiency, reducing the amount of coagulant used, meeting the water quality requirements for water injection in low - permeability reservoirs, and reducing the floor area of the equipment, and has broad application prospects.