Abstract:Formation mechanism of the composite phase change material: A composite phase change material was prepared using bamboo charcoal (BC) embedded with polyethylene glycol (PEG) as PCM and low density polyethylene (LDPE) as matrix. Phase change materials (PCMs) are often used as building materials to reduce the energy consumption. However, conventional PCMs are susceptible to leakage and have a short service life. To solve this problem, thermal energy storage (TES) composites were fabricated by using bamboo charcoal (BC) encapsulating polyethylene glycol (PEG) as the PCM and low density polyethylene (LDPE) as the matrix. The shape and structure of BC and BC‐plastic composites were examined using scanning electron microscopy, X‐ray diffractometry, and mercury intrusion porosimetry. Differential scanning calorimetry, thermogravimetry (TG), and infrared thermography were used to characterize the manufactured TES composites. Physical and mechanical strength assessments were also conducted. The results demonstrated that: (1) BC possessed a rich void structure with a porosity of 61.4%, which could be used to adsorb PEG and the composites was a combination of PEG, BC, and LDPE with no chemical reaction; (2) thermal tests demonstrated that the composites exhibited favorable temperature regulation properties, featuring a maximum latent heat capacity of 29.1 J/g along with suitable phase change temperatures, yet thermal durability needs to be improved much further, addition of PEG reduced thermal conductivity of the composite from 0.38 to 0.34 W/mK; (3) the addition of PEG was beneficial for the impact strength but had a negative impact on the flexural and tensile properties; and (4) due to their satisfactory thermal performance and acceptable mechanical properties, these TES composites can be effectively utilized as building materials for temperature control purposes. Highlights Bamboo charcoal (BC) had a large number of pores that can encapsulate polyethylene glycol (PEG). PEG/BC performed satisfactory latent heat. Low density polyethylene was used as the matrix to realize the second encapsulation of phase change material. Thermal energy storage composites had excellent stability and good heat storage capacity. PEG incorporation negatively affected flexural and tensile properties.

An energy storage composite using cellulose grafted polyethylene glycol as solid–solid phase change material

Plastic composite of bamboo charcoal stabilized polyethylene glycol with thermal energy storage and temperature regulation for building energy efficiency

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Wood-plastic materials with organic–inorganic hybrid phase change thermal storage as novel green energy storage composites for building energy conservation

High interface compatibility and phase change enthalpy of heat storage wood plastic composites as bio-based building materials for energy saving

Investigation on interfacial interaction and thermal properties of flame retarded wood-plastic form-stable phase change material

Green, recyclable and high latent heat form-stable phase change composites supported by cellulose nanofibers for thermal energy management

MXene-decorated bio-based porous carbon composite phase change material for superior solar-thermal energy storage and thermal management of electronic components

A Recyclable Energy Storage Wood Composite with Photothermal Conversion Properties for Regulating Building Temperature

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Synthesis and characterization of wood-based phase change material with high photothermal conversion efficiency

Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials

Phase-Change-Material-Impregnated Wood for Potential Energy-Saving Building Materials

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

Encapsulation of polyethylene glycol in cellulose-based porous capsules for latent heat storage and light-to-thermal conversion

Mica-stabilized polyethylene glycol composite phase change materials for thermal energy storage

An ultrastrong wood-based phase change material for efficient photothermal conversion and thermal energy conservation

Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage