Abstract:Porous lead-free piezoelectric ceramics are characterized by their environment-friendly, light weight, and large specific surface area. The optimization of porous Na0.5Bi0.5TiO3-based lead-free piezoelectric ceramics can improve piezoelectric properties, enhance force–electric coupling characteristics, and effectively promote energy conversion, expanding the application in force-electric coupling devices. This study aimed to prepare [Smx(Bi0.5Na0.5)1−3x/2]0.94Ba0.06TiO3 (x = 0, 0.01, 0.02, 0.03, 0.04) lead-free ceramics with porous structures, resulting in the piezoelectric constant d33 = 131 pC/N and the plane electromechanical coupling coefficient kp = 0.213 at x = 0.01. The presence of pores in lead-free ceramics has a direct impact on the domain structure and can cause the depolarization process to relax. Then, the soft doping of Sm3+ makes the A-site ion in porous (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics occupancy inhomogeneous and generates cation vacancies, which induces lattice distortion and makes the domain wall motion easier, resulting in the improvement of piezoelectric properties and electromechanical coupling parameters. Furthermore, the piezoelectric oscillator exhibits greater resistance to resonant coupling in the radial extension vibration mode. These results infer that a combination of porosity and Sm3+ doping renders (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics base material for piezoelectric resonators, providing a scientific basis for their application in force–electric coupling devices, such as piezoelectric resonant gas sensors.

High piezoelectricity of 3D printed BaTiO3-xBaSnO3 piezoceramics via vat photopolymerization

Enhanced Electric-Field-induced Strain in 0.7bi(1−x)smxfeo3–0.3batio3 Lead-Free Ceramics

Enhanced Piezoelectric Properties of (ba1−xcax)(ti0.92sn0.08)o3 Lead‐Free Ceramics

3D Printing of BaTiO3 Piezoelectric Ceramics for a Focused Ultrasonic Array

The Fabrication and Characterization of BaTiO3 Piezoceramics Using SLA 3D Printing at 465 nm Wavelength

Effect of particle grading on the properties of photosensitive slurry and BaTiO3 piezoelectric ceramic via digital light processing 3D printing

Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Ultra-high d anti-chiral negative Poisson’s ratio BaTiO3 ceramics fabricated by vat photopolymerization 3D printing

Preparation and properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics via vat photopolymerization

Fabrication of barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer

High Piezoelectricity of BaTiO3–CaTiO3–BaSnO3 Lead-Free Ceramics

Effect of the particle size on the performance of BaTiO3 piezoelectric ceramics produced by additive manufacturing

Relationship of Electrical Properties and Partical Size of Piezoelectric Ceramics Fabricated by Digital Light Processing 3D Printing

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Improvement of Piezoelectricity of (Bi0.5Na0.5)0.94Ba0.06TiO3 Ceramics Modified by a Combination of Porosity and Sm3+ Doping

Morphotropic phase boundary and electric properties in (1 − x )Bi 0.5 Na 0.5 TiO 3 – x BaSnO 3 lead-free piezoelectric ceramics

3D printing orientation controlled PMN-PT piezoelectric ceramics

Enhanced piezoelectric properties of Lu2O3 doped BCTS ceramics with orthorhombic–tetragonal coexisting phase

Polymorphic Phase Transition and Enhanced Piezoelectric Properties in (ba0.9ca0.1)(ti1−xsnx)o3 Lead-Free Ceramics

Large Piezoelectric Coefficient in (ba1−xcax)(ti0.96sn0.04)o3 Lead‐Free Ceramics