Abstract:Piezoelectric ceramics are vital components in electronic devices. These components with designed complicated structures are difficult to be fabricated using traditional methods due to their high brittleness and hardness. Additive manufacturing technologies offer new opportunities for the preparation of piezoelectric ceramics. Herein, we prepared high-performance BaTiO3 ceramics by digital light processing. The slurry with 1.5 wt % dispersant content showed favourable dispersion effect and stability. The optimum photoinitiator of 3 wt % and applied energy dose of 160 mJ/cm2 could provide a sufficient interlayer combination. After a sintering process, sintered BaTiO3 ceramics kept a single perovskite tetragonal structure and the relative density reached 95.4%, which could be comparable to that of BaTiO3 ceramics prepared by dry pressing. The printed BaTiO3 ceramics exhibited favorable dielectric and piezoelectric properties (ɛr = 1543, tan δ = 0.0185, d33 = 180 pC/N, g33 = 1.32 × 10−2 Vm/N and FOMoff = 1.28 × 10−10 m2/N). Furthermore, some samples with designed complicated structures were fabricated to evaluate the performance of piezoelectric energy harvesting, and an open circuit voltage and short circuit current of ∼5.5 mV and ∼5.2 pA were obtained. These results indicate that digital light processing is a promising approach to fabricate piezoelectric energy-harvesting ceramics with high geometrical flexibility.

3D Printing of BaTiO3 Piezoelectric Ceramics for a Focused Ultrasonic Array

Fabrication of barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer

BCHT Lead-Free Piezoelectric Ceramics Preparation and Ultrasonic Transducer Fabrication Via Powder Injection Molding Using Simple Binder

Digital Light Processing 3d Printing of Batio3 Piezoelectric Ceramics

Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters

High piezoelectricity of 3D printed BaTiO3-xBaSnO3 piezoceramics via vat photopolymerization

The Fabrication and Characterization of BaTiO3 Piezoceramics Using SLA 3D Printing at 465 nm Wavelength

3D printed piezoelectric focused element for ultrasonic transducer

3D printing of CaBi4Ti3.925(Nb2/3Mn1/3)0.075O15 ceramics for high temperature ultrasound transducer

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Effect of the particle size on the performance of BaTiO3 piezoelectric ceramics produced by additive manufacturing

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

3D printing orientation controlled PMN-PT piezoelectric ceramics

Relationship of Electrical Properties and Partical Size of Piezoelectric Ceramics Fabricated by Digital Light Processing 3D Printing

Fabrication and characterization of 3D printing induced orthotropic functional ceramics

Effect of BaTiO3 Particles with Different Shape on Electrical Properties of (bi0.5na0.5)tio3 Piezoceramics

0.36Bisco3-0.64Pbtio3 Piezoelectric Ceramics for High Temperature Ultrasonic Transducer Applications

Effect of particle grading on the properties of photosensitive slurry and BaTiO3 piezoelectric ceramic via digital light processing 3D printing

Piezoelectric and Dielectric Properties of (bi0.5na0.5)0.94ba0.06tio3–ba(zr0.04ti0.96)o3 Lead-Free Piezoelectric Ceramics

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

3D printing PMN-PT textured ceramics for transducer applications