Abstract:Alkyl-substituted dibenzothiophenes such as 4,6-dimethyldibenzothiophene are a kind of typical refractory sulfur compound in fuel oil. Herein, three-dimensional ordered macro–mesoporous (3DOM) tungsten oxide catalysts were successfully prepared for aerobic oxidative desulfurization of 4,6-dimethyldibenzothiophene. The experimental results indicated that the as-prepared material 3DOM WOx-400 not only contained a hexagonal packed nanoporous structure but also abundant oxygen defects on its skeleton, exhibiting aerobic oxidative desulfurization of over 99% in 4 h. Moreover, sulfur removal could still reach 99% after recycling five times. Through free radical capture experiments, the superoxide radical is reasonably proposed in the mechanism. This work would provide a feasible route to develop highly efficient nanoporous materials for desulfurization of fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02639?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02639</a>.TGA profiles of the precursor with PMMA (A) and without PMMA (B) (Figure S1); FT-IR spectra of the precursor mixture at different calcination stages (Figure S2); SEM image of the PMMA sphere alloy as the template (Figure S3); macropore diameter distribution of 3DOM WOx-400 (Figure S4); Raman spectrum of commercial WO3 (Figure S5); XPS full-scan spectra of various samples (Figure S6); comparison on W 4f peaks of 3DOM WOx-400 and WOx-400 (Figure S7); W 4f core-level of 3DOM WOx-300 and 3DOM WOx-500 (Figure S8); EPR spectra of various samples (Figure S9); effect of the reaction temperature on sulfur removal in the desulfurization system (Figure S10); GC–MS analysis for the extractant of the catalyst phase after the reaction (Figure S11); SEM images of recycled 3DOM WOx-400 (Figure S12); FT-IR spectra of fresh and recycled 3DOM WOx-400 (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02639/suppl_file/an0c02639_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hydrophobic Modification of Halloysite Nanotubes Loaded with a Small Amount of Tungsten Oxide for Efficient Oxidative Desulfurization

Enhancing the Production of Hydrogen Peroxide from Electrocatalytic Oxygen Reduction Reaction by Tailoring the Electronic States of Single-Walled Carbon Nanotubes: a Synergistic Effect from Interior Filling and Exterior Oxidation

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Tungsten oxide nanoparticles encapsulated by porous carbon for boosting H 2 S selective oxidation performance

Highly flexible sub-1 nm tungsten oxide nanobelts as efficient desulfurization catalysts.

Synergistic Catalysis in Monodispersed Transition Metal Oxide Nanoparticles Anchored on Amorphous Carbon for Excellent Low-Temperature Dehydrogenation of Magnesium Hydride

A novel MOF-808 derived material for oxidative desulfurization: the synergistic effect of hydrophobicity and electron transfer

Synthesis of Hydrophobic Nanosized Hierarchical Titanosilicate-1 Zeolites by an Alkali-Etching Protocol and Their Enhanced Performance in Catalytic Oxidative Desulphurization of Fuels

Silver Nanocrystal-Decorated Polyoxometalate Single-Walled Nanotubes As Nanoreactors For Desulfurization Catalysis At Room Temperature

Ti-grafted MIL-101 as hydrophilic catalyst for efficient oxidative desulfurization of dibenzothiophene with hydrogen peroxide

Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

Titanium dioxide modified nanosized TS-1 zeolite supported phosphotungstic acid as a catalyst for deep catalytic oxidative desulfurization of fuel oil

Constructing efficient ɑ-Fe2O3/g-C3N4/HNTs-loaded heterojunction photocatalysts for photocatalytic oxidative desulfurization: Influencing factors, kinetics, and mechanism

Hierarchically Nanoporous TS-1 Zeolites for Catalytic Oxidation Desulfurization of Liquid Fuels

Heteropolyacids supported on micro/mesoporous materials PMoW@HKUST-1@ZSM-5-MCM-41: Effective catalyst for oxidative desulfurization with oxygen

Aerobic Oxidative Desulfurization by Nanoporous Tungsten Oxide with Oxygen Defects

Construction of Mo-MOF-derived molybdenum dioxide on carbon nanotubes with tunable nitrogen content and particle size for oxidative desulfurization

Design And Synthesis Of Metal Sulfide Catalysts Supported On Zeolite Nanofiber Bundles With Unprecedented Hydrodesulfurization Activities

Morphology-Controlled Construction and Aerobic Oxidative Desulfurization of Hierarchical Hollow Co–Ni–Mo–O Mixed Metal-Oxide Nanotubes

Incorporating carbon quantum dots into phosphotungstic acid ionic liquid materials for enhanced catalytic oxidative desulfurization