Abstract:The dynamic load effect of supports is mainly caused by the movement of the roof structure and the load transfer of overburden. In view of the practice issue that the phenomenon of strong ground pressure is easy to happen, when the working face of the lower coal seam passes the inclined coal pillar in shallow buried closely multiple-seam, it will lead to supprot damaged. This paper takes the mining of over-inclined coal pillars in the 22410 working face of the Bulianta Coal Mine as the background, based on the research method combining the field measurement, physical simulation experiment, and numerical calculation, the evolution law of the front abutment pressure (FAP) and roof weighting in mining under the inclined coal pillar is analyzed, and the mechanism of the stress transfer of the inclined coal pillar and the dynamic load of the support is revealed. The research shows that the concentrated stress of the coal pillar is jointly borne by the front coal wall of the working face and the interburden structure above the support. The vertical stress transmitted from the coal pillar to the floor acts on the key blocks of the interburden of the lower coal seam, which causes strong pressure and dynamic load effect, such as roof structure cut-off. The periodic breaking of the key stratum of the interburden leads to the development height and range of the cracks increasing stepwise. The partition characteristics of the mutual transformation of the interburden stress, the FAP, and the working resistance (WR) by passing the coal pillar stage are revealed, which is divided into three stages and four regions. With the working face passing through the inclined coal pillar, the influence area of the concentrated stress of the coal pillar is reduced, and the peak stress of the coal pillar is gradually transferred to the outside of the coal pillar. When the working face is 5 m away from the coal pillar, the peak of FAP and WR reaches the maximum values, the roof is cutting along the peak stress line, and the working face has a strong weighting phenomenon. The research results are consistent with the field measurement results, providing a reference for the mining of working faces under similar conditions.

Study on the Working Resistance of a Support under Shallowly Buried Gobs According to the Roof Structure during Periodic Weighting

Research on Roof Weighting Mechanism of Coal Pillar Mining in Shallow Buried Closely Spaced Multi-seams

Research on Roof Load Transfer by Passing Coal Pillar of Working Face in Shallow Buried Closely Multiple-Seam

Characteristics of Strata Behavior and Differentiated Control of Fully Mechanized Mining Working Face with Abnormal Roof

Investigating the Mechanism of Strong Roof Weighting and Support Resistance Near Main Withdrawal Roadway in Large-Height Mining Face

Mechanism and control technology of strong ground pressure behaviour induced by high-position hard roofs in extra-thick coal seam mining

Multi-method joint monitoring study on strata behavior in shallow seam mining under bedrock gully

Determination of working resistance of support parameter variation of large mining height support: the case of Caojiatan coal mine

Numerical Investigation of the Influence of Roof-Cutting Parameters on the Stability of Top Coal Gob-Side Entry Retaining by Roof Pre-Fracturing in Ultra-Thick Coal Seam

Calculation Method of Support Load Zoning and Mechanism of Mine Pressure Behavior in Upward Mining Face across Half of the Goaf along the Panel Direction

Analysis on Filling Ratio and Shield Supporting Pressure for Overburden Movement Control in Coal Mining with Compacted Backfilling

A study on the mechanism and control technology of strong mine pressure in parallel coal pillar and hard roof mining

Study on Roof Instability Effect and Bearing Characteristics of Hydraulic Support in Longwall Top Coal Caving

Model of Overlying Strata Structure in Large Mining Height Excavating Condition and Calculation of Support Working Resistance

Abnormal ore pressure mechanism of working face under the influence of overlying concentrated coal pillar

Abutment Pressure Distribution Law and Support Analysis of Super Large Mining Height Face

Roof movement and instability fracture characteristics in shallow-buried thin coal seam conventional mining faces

Mechanism of Support Optimization and Confined Blasting of Thick and Hard Rock with a Wedge-Structure Immediate Roof: A Case Study

Structural Characteristics of the Overlying Strata in a Fully Mechanized Longwall Face with the Low-Position Thick-Hard Roof

Stability mechanism and countermeasure of the solid coal rib in deep gob-side entry retaining: Insights from theoretical analysis numerical simulation

An exploration of improving stability of gob-side entry retained with graded and zoned pressure relief technology: a case study