Abstract:Research vessels are commonly used on a daily basis for ocean exploration and payload handling. However, due to unpredictable wave motion on the ship and the flexibility of the cable, the heave of the ship is unavoidable and causes danger during operations, loss of payload, possible damages to expensive equipment and prolong period of downtime. A compensator system is an essential part of operations to mitigate this effect and to ensure safety, reduce down-time of operation and increase efficiency while providing longer and better duration of operation even in harsh conditions. In this article, a passive heave compensator system with cylinder, accumulator and depth compensator connected in series by pressured pipes developed for a scientific research ship with length of 68m and breath of 16m is analyzed along the coast of Guyana, South America. The payload used in this analysis is 200 ton. The working principle of the heave compensation system is described, the parameters affecting the performance of the system are simulated and analyzed using MatLab. A 3D model of the system is built using SolidWorks and schematic drawings are produced from AutoCAD. The compensation rate of the system is higher than 77% under the influence of the input wave and the system has a response of an average setting time of 18s. The point of maximum load exerted is at the splash zone. For a typical most probable extreme significant wave height, Hs= 2.3m, period T= 6s and direction μ= 45° in the operational area, the reduction in heave motion when the vessel is equipped with the heave compensator is approximately 77% compared to 47% reduction when the vessel is without a compensator.

A review of vertical motion heave compensation systems

State Constrained Variable Structure Control for Active Heave Compensators.

Nonlinear Control for an Active-passive Hybrid Compensation System

Nonlinear control of active heave compensator for an underwater towed system

A Pressure-Displacement Control for an Active-Passive Hybrid Compensation System

Control Strategy for Performing Predictions for a Semi-Active Compensation System

PREDICTIVE ROBUST CONTROL BASED ON HIGHER-ORDER SLIDING MODE FOR PASSIVE HEAVE COMPENSATOR WITH HYDRAULIC TRANSFORMER

Numerical simulation of a passive heave compensator for scientific research ships

Nonlinear Robust Prediction Control of Hybrid Active–Passive Heave Compensator With Extended Disturbance Observer

Disturbance Observer-Based Nonlinear Motion Control of the Parallel Platform for Wave Compensation

Experimental validation of an active heave compensation system: Estimation, prediction and control

Motion Control of Docking Auv in Currents

Prediction, Control and Energy Analyses of Hydraulic Transformer Based Heave Compensator

Virtual prototype modeling and fuzzy control of the heave compensation system for a 500-ton deep-sea mining vessel

Dynamic modelling and analysis of 3-axis motion compensated offshore cranes

Dynamic simulation and adaptive heave compensation control of a wave-compensated gangway under random wave excitation

Anti-Swaying Control Strategy of Ship-Mounted 3-RCU Parallel Platform Based on Dynamic Gravity Compensation

Scale model test of a semi-active heave compensation system for deep-sea tethered ROVs

Research on Heave Compensation System Based on Switched Reluctance Motor

Research on Three-Closed-Loop ADRC Position Compensation Strategy Based on Winch-Type Heave Compensation System with a Secondary Component

Recent Advances on Vibration Control of Structures Under Dynamic Loading