Abstract:Knitted textiles are a popular reinforcement in polymer composites for their high drape properties and superior impact energy absorption, making them suitable for specific composite components. Nevertheless, limited attention has been paid to modeling the mechanical behavior of knitted fabric composites since knitted textiles generally offer lower stiffness and strength. This study presents a 3D finite element (FE) modeling of a precise geometrical model of weft-knitted carbon fiber thermoplastic composite to better understand its nonlinear mechanical behavior and interface damage mechanisms under tension. Toward this end, a representative volume element (RVE) of the weft-knitted fabric composite with periodic boundary conditions (PBCs) is generated based on actual dimensions. The validity of the textile RVE to represent the macroscopic behavior was evaluated prior to analyzing the composite. The effect of fiber tow/matrix debonding during tension on the mechanical behavior of the composite is investigated using the cohesive zone model (CZM). Finally, the predicted results of the mechanical behavior of the composite with and without considering the interface failure are compared with the experimental measurements. It is found that the fiber tow/matrix interfacial strength has a significant effect on the tensile performance of the knitted fabric composites, particularly when they are subjected to a large strain. According to the simulation results, the highest tensile performance of the composite is achieved when the interfacial debonding is prevented. However, considering the fiber/matrix debonding in the modeling is essential to achieve a good agreement with the experimental results. In addition, it is concluded that stretching the fabric before composite manufacturing can substantially increase the tensile stiffness of the knitted composite.

Response Surface Model for Mechanical Properties of Robotically Stitched Composites

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Influence of Stitch Angle on the Flexural Response of Composite Structures

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

Experimental Modeling and Multi-Response Optimization in Friction Stir Welding Process Parameters of AA2024-T3 Using Response Surface Methodology and Desirability Approach

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Validation of DOE Factorial/Taguchi/Surface Response Models of Mechanical Properties of Synthetic and Natural Fiber Reinforced Epoxy Matrix Hybrid Material

Experimental Investigation of Mechanical Properties in Friction Stir Welding for Butt Joints with Different Thicknesses Using Response Surface Methodology

Investigation and Multi-Response Optimization of Friction Stir Welding Process Parameters for Stir Cast AA6092/SiC Composite

Coupling of injection molding process to mechanical properties of short fiber composites: A through process modeling approach

Automation of Friction Stir Welding Process to Join Aluminum Matrix Composites by Optimization

Enhanced Estimation of Axial Compressive Strength for CFRP Based on Microscale Numerical Simulation and the Response Surface Method

Experimental multi-scale characterization of mode-II interlaminar fracture in geometrically scaled stitched and unstitched resin-infused composites

Morphological evolution and strength performance of green-aluminium-7075 hybrid composites modeled by response surface analysis

Directionally Oriented Reinforcements of Warp-Knitted Fabrics for Composite Preforms

Tensile mechanical performance of natural/natural fiber reinforced hybrid bio-composite materials – A statistical approach

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Optimization of Tensile Strength and Young's Modulus of CNT-CF/Epoxy Composites Using Response Surface Methodology (RSM)

Structural Optimization of a Rigid Metal Container Cover Based on Parametric Solid Modeling

An integrated simulation method for analyzing mechanical properties of injection molded fiber‐reinforced polymers