Abstract:The research focuses on the behaviour and process parametric influence on friction stir welded Al metal matrix composites reinforced with varied percentages of SiC, B4C, and Mg. The experimentation involves fabrication of Al metal matrix composites followed by friction stir welding and, subsequently, evaluation of the joint properties in terms of mechanical strength, microstructural integrity, and quality. In comparison to other joints with varied base material compositions, the weld exhibits refined grains and uniform distribution of hybrid particles in the joint region, resulting in increased strength. Higher SiC composition adds to greater strength, better wear characteristics, and harness, whereas B4C percentage is linked to hardness. The maximum ultimate tensile stress for a particular sample was determined to be around 160MPa, while the maximum percentage elongation was found to be around 165 for 10% SiC and 3% B4C. As the amount of SiC declines and that of B4C rises, the percentage elongation decreases. In samples with a B4C weight percentage of 10%, the greatest hardness measured was around 103Hv. For a load of 30N, the wear rate was as high as 12gm/s with a SiC weight percentage of 10. For lower load values and a higher percentage of B4C, the wear rate often decreased. Chemical properties are barely changed. Therefore, the materials keep their original qualities after welding. During the non-destructive testing process, no large cracks, pores, or clusters of pores are found, indicating that the weld is of good quality. To achieve a satisfactory weld, optimal ranges based on analysis using machine learning of rotary tool speed, tool linear velocity, transverse speed are maintained. Linear Regression algorithm, Random Forest algorithm and Lasso Regression algorithms are being used and the results are also compared. This work covers a wide range of topics, and the results are found to have improved significantly in most cases and is in good agreement with data previously presented in the literatures.

Automation of Friction Stir Welding Process to Join Aluminum Matrix Composites by Optimization

Investigation and Multi-Response Optimization of Friction Stir Welding Process Parameters for Stir Cast AA6092/SiC Composite

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Experimental investigation and parametric optimization of FSW of mineral-reinforced AA6061 matrix composite

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloy by response surface methodology

Modeling and Optimization of Friction Stir Welding Parameters for Joining Dissimilar Aluminum Alloys

Machine Learning for Parametrical Analysis of Friction Stir Welded Aluminum Metal Matrix Composites

Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy

Optimizing Friction Stir Welding of Dissimilar Grades of Aluminum Alloy Using WASPAS

Friction stir welding parameters optimization for tailored welded blank sheets of AA1100 with AA6061 dissimilar alloy using response surface methodology

Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology

Process Evaluation and Numerical Optimization in Friction Stir Welding of Dissimilar AMCs

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloys AA3003 and AA6061 by RSM

Experimental Modeling and Multi-Response Optimization in Friction Stir Welding Process Parameters of AA2024-T3 Using Response Surface Methodology and Desirability Approach

Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints

Optimizing the process parameters in Friction stir Spot Welding Of Dissimilar Aluminum Alloys Using Genetic Algorithm

Process parameter optimization of 6061AA Friction Stir Welded Joints using Supervised Machine Learning Regression-based Algorithms

Process parameter optimization of Friction Stir Welding on 6061AA using Supervised Machine Learning Regression-based Algorithms

ANN modeling and optimization of friction stir welding performance for AA6061 and AA5083 alloy joints

Optimization of Process Parameters for Friction Stir Welding of Aluminum and Copper Using the Taguchi Method

Response surface, neural network, and experimental approach to optimize process parameters and characterization of Al-Mg alloy by friction stir welding