Abstract:During train operation, water, oil, or oil-water mixtures may adhere to the wheel/rail contact interface, thereby altering the adhesion between the wheel and the rail. In order to study the adhesion characteristics of wheel/rail under wet conditions, a deterministic mixed lubrication model considering surface roughness and transient state is established in this paper, in which the quasi-system numerical and finite difference method are used for numerical solution. The results show that the influence of speed on the wheel-rail adhesion characteristics is more obvious, with the increase of train speed, the fluid dynamic pressure effect between the wheel-rail contact interface is enhanced, the contact pressure of the wheel-rail carried by the fluid film increases, the wheel-rail contact area accounts for the direct contact area of the proportion of the wheel-rail contact area continues to decrease, the thickness of the fluid film between the wheel-railcontinues to increase, and the coefficient of the wheel-rail adhesion decreases. Under the same working condition, with the increase of axle weight, the wheel-rail attachment coefficient increases, and when the axle weight reaches 22t, the attachment coefficient becomes obviously smaller; with the increase of creep-slip rate, the wheel-rail attachment coefficient increases obviously, and then stays relatively stable; with the increase of the wheel-rail surface roughness, the wheel-rail attachment coefficient also increases. Different wetting conditions between wheel/rail interfaces have more obvious effects on wheel/rail adhesion characteristics. In particular, under the same working conditions, the film thickness between the wheel/rail is the largest and the wheel/rail adhesion coefficient is the smallest when the wheel/rail interface is lubricated by oil. It is worth noting that when oil lubrication occurs on the surface of the wheel -rail, the thickness of the fluid film between the wheel-rail is the largest, and the coefficient of adhesion of the wheel-rail is the smallest, which brings safety hazards to the train operation. Therefore, it is necessary to regularly check and clean up the wheel-rail surface, especially the oil contaminants.

Review of various influencing factors and improvement measures on wheel-rail adhesion

Wheel-rail contact and friction models: A review of recent advances

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Study on the wheel/rail adhesion characteristic under water and oil conditions by using mixed lubrication model

Numerical study of wheel–rail adhesion performance of new-concept high-speed trains with aerodynamic wings

Influence of Friction Modifiers on Improving Adhesion and Surface Damage of Wheel/Rail under Low Adhesion Conditions

Adhesion And Damage Characteristics Of Wheel/Rail Using Different Mineral Particles As Adhesion Enhancers

Experimental investigation of wheel rail adhesion under leaf contamination conditions

Wheel/rail adhesion and analysis by using full scale roller rig

A transient three-dimensional wheel-rail adhesion model under wet condition considering starvation and surface roughness

Experimental investigation of high-speed wheel-rail adhesion under large creepage and water conditions

Research Progress of High-Speed Wheel–Rail Relationship

Experimental study on adhesion recovery based on a circumferential test rig

Explicit finite element simulations of dynamic low adhesion behavior between wheel and rail in the presence of high-frequency vibrations

Multi-objective optimisation of wheel-rail adhesion for high-speed trains with aerodynamic lift wings

A Simplified Non‐Hertzian Wheel‐Rail Adhesion Model Under Interfacial Contaminations Considering Surface Roughness

An experimental study on the effects of friction modifiers on wheel–rail dynamic interactions with various angles of attack

The effect of third bodies on wear and friction at the wheel-rail interface

A comprehensive wheel–rail contact model incorporating sand fragments and its application in vehicle braking simulation

A numerical study on locomotive wheel wear on curved track subjected to adhesion control

Review on the Research Techniques about the Adhesion Mechanisms of Metals/Polymer Coatings