Abstract:Ternary alloy CdS x Se 1–x has the physical properties of CdS and CdSe, and its band gap can be adjusted by changing the component ratio of the elements. The alloy has excellent photoelectric properties and has potential application in optoelectronic devices. Although one has made some research progress of the CdSSe-based photodetectors, their performances are still far from the commercial requirements, so how to improve the performance of the device is the focus of current research. In this work, a single crystal CdS 0.42 Se 0.58 nanobelt device is first prepared by thermal evaporation. Under 550 nm illumination and 1 V bias, the ratio of photocurrent to dark current of the device is 1.24×10~3, the responsivity arrives at 60.1 A/W, and the external quantum efficiency reaches 1.36×10~4%, and the detectivity is 2.16×10 11 Jones. Its rise time and fall time are about 41.1/41.5 ms, respectively. Secondly, after the CdSSe nanobelt is decorated by Au nanoislands, the optoelectronic performance of the device is significantly improved. Under 550 nm illumination and 1 V bias, the I p /I d ratio, responsivity, external quantum efficiency and detectivity of the device are increased by 5.4, 11.8,11.8 and 10.6 times, respectively, and the rise time and fall time are both reduced to half of counterparts of single CdSSe nanobelt. Finally, the microscopic physical mechanism of the enhanced optoelectronic performance of the device is explained based on localized surface plasmon resonance of Au nanoislands. After the combination of gold nanoislands and CdSSe nanobelt, the difference in Fermi level between them results in the transfer of electrons from CdSSe nanobelt to Au nanoislands, thus forming an internal electric field at the interface, which is directed from CdSSe nanobelt to Au nanoislands. Under illumination, the electrons in the Au nanoislands acquire enough energy to jump over the Schottky barrier because of localized surface plasmon resonance. These photoexcited hot electrons are trapped and stored in extra energy levels above the conduction band minimum, and then are cooled down to the band edge, thus realizing the transfer of electrons from Au nanoislands to CdSSe nanobelt. Moreover, the internal electric field also greatly promotes the transfer of hot electrons from Au nanoislands to CdSSe nanobelt, and inhibits the recombination of carriers at the interface,resulting in large photocurrent. Our work provides an effective strategy for fabricating high-performance photodetectors without increasing the device area.

Enhancement in photo-response of CuZnS nanocrystals-based photodetector using asymmetric work function electrodes

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors.

Enhancing Photoelectric Response of Self-powered UV and Visible Detectors Using CuO/ZnO NRs Heterojunctions

Fabrication and characterization of photodetector using solvothermally synthesized p-CZTS/Se nanocrystals and n-Si heterojunction

Non-aligned ZnO Nanowires Composited with Reduced Graphene Oxide and Single-Walled Carbon Nanotubes for Highly Responsive UV–visible Photodetectors

High-performance ultraviolet photodetector based on Sn-doped CuO@ZnO nanorod arrays composites

High-performance quasi-solid-state photoelectrochemical-type ultraviolet photodetector based on ZnO nanowire arrays

A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods

Concurrent Improvement of Photocarrier Separation and Extraction in ZnO Nanocrystal Ultraviolet Photodetectors

Fast-Response Metal–Semiconductor–Metal Junction Ultraviolet Photodetector Based on ZnS:Mn Nanorod Networks via a Cost-Effective Method

An Optimized Ultraviolet‐A Light Photodetector with Wide‐Range Photoresponse Based on ZnS/ZnO Biaxial Nanobelt

Synergetic Enhancement of CsPbI3 Nanorods-based High-Performance Photodetectors via PbSe Quantum Dot Interface Engineering

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

Superior visible photoelectric response with Au/Cu2NiSnS4 core-shell nanocrystals

High-Performance Photodetectors with an Ultrahigh Photoswitching Ratio and a Very Fast Response Speed in Self-Powered Cu 2 ZnSnS 4 /CdS PN Heterojunctions

Self-connected CuO-ZnO radial core-shell heterojunction nanowire arrays grown on interdigitated electrodes for visible-light photodetectors

Broadband (Ultraviolet to Near-Infrared) Photodetector Fabricated in n-ZnO/p-Si Nanowires Core–Shell Arrays with Ligand-Free Plasmonic Au Nanoparticles

Fabrication of enhanced performance Visible-light photodetector based on Ag/ZnS/p-Si/Ag heterojunction grown by chemical bath deposition

Piezophototronic Effect Enhanced UV/Visible Photodetector Based on ZnO/ZnSe Heterostructure Core/Shell Nanowire Array and Its Self‐Powered Performance

High-performance Photodetectors Based on Au Nanoislands Decorated CdSSe Nanobelt

An Ultraviolet‐to‐NIR Broad Spectral Nanocomposite Photodetector with Gain