Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

An Efficiently Doped PEDOT:PSS Ink Formulation via Metastable Liquid−Liquid Contact for Capillary Flow‐Driven, Hierarchically and Highly Conductive Films (Small 15/2023)

Ionic Liquid Induced Supramolecular Self-Assembly of Poly(3,4-Ethylenedioxythiophene)/poly(4-styrenesulfonate) Thin Films with Enhanced Conductivity and Tunable Nanoporosity

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Enhanced Electrochemical Performance of Pedot Film Incorporating Pedot: Pss

Highly conductive film of PEDOT:PSS treated with cosolvent of formamide and methanol for flexible piezoresistive sensor applications

Imparting High Conductivity to 3D Printed PEDOT:PSS

Electrohydrodynamic Printing of Microscale PEDOT:PSS-PEO Features with Tunable Conductive/Thermal Properties.

Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors

A high-conductivity n-type polymeric ink for printed electronics

Deep Eutectic Solvent Induced Porous Conductive Composite for Fully Printed Piezoresistive Pressure Sensor

Additive Blending Effects on PEDOT:PSS Composite Films for Wearable Organic Electrochemical Transistors

Flexible Multifunctional Sensors Using 3-D-Printed PEDOT:PSS Composites

Conductivity Enhancement of PEDOT:PSS via Addition of Chloroplatinic Acid and Its Mechanism

“Drop-on-textile” patternable aqueous PEDOT composite ink providing highly stretchable and wash-resistant electrodes for electronic textiles

Breathing-effect Assisted Transferring Large-Area PEDOT:PSS to PDMS Substrate with Robust Adhesion for Stable Flexible Pressure Sensor

PEDOT:PSS: From conductive polymers to sensors

Flexible, Transparent, Thickness-Controllable SWCNT/PEDOT:PSS Hybrid Films based on Coffee-Ring Lithography for Functional Noncontact Sensing Device.

Highly Conductive Inkjet-Printed PEDOT:PSS Film under Cyclic Stretching

Coagulation Bath‐Assisted 3D Printing of PEDOT:PSS with High Resolution and Strong Substrate Adhesion for Bioelectronic Devices

Hydrogel‐Enabled Transfer Printing: Hydrogel‐Enabled Transfer‐Printing of Conducting Polymer Films for Soft Organic Bioelectronics (adv. Funct. Mater. 6/2020)