Abstract:Silicon is a promising active material for the anode in lithium-ion batteries (LIB), since it enables much higher energy densities than graphite - the state-of the art material for LIB-anodes. However, the utilization of silicon brings many challenges, which originate mainly from the enormous volume change between the lithiated and delithiated state (300%). One of the consequences is a constant re-formation of the solid electrolyte interphase (SEI), which is accompanied by a loss of active Li + . This leads to a strong capacity fading, which results in a very short cycle life. [1] An efficient and economical approach to tackle these problems is the utilization of additives in the electrolyte. Additives are small molecules or salts that decompose during the first cycles of the battery life resulting in an interphase with modified composition and thereby an improved SEI. Depending on the additive the SEI can reduce the impedance of the cell and help to maintain the structural stability of the anode. [2] In this work four new additives were synthesized and electrochemically tested with a silicon-based anode. Improvements regarding capacity retention were found for all additives in half-cell measurements. Hence, after 500 cycles additive 1 showed a 26 % increased capacity retention, while additive 4 induced an improvement of 43 % compared to the base electrolyte. Electrochemical impedance measurements were conducted and simulated directly after the formation as well as after 100 cycles. The resistance of the first semi-circle showed a reduction of 40 % and 26 % after formation and 100 cycles respectively, when the additive 1 is used. The second semi-circle showed no significant change after formation, but a 27 % reduction of resistance after 100 cycles, when the additive 1 is used. The semi-circles can be attributed to the Li ion migration in the SEI. Therefore, the SEI build from the decomposition of additive 1 favours charge-transfer compared to the SEI build from the base electrolyte. Scanning electron microscopy (SEM) images of lithiated and delithiated electrodes show smaller cracks on the surface when using additive 1 compared to the electrode treated with the base electrolyte. This phenomenon shows an increased cohesive force of the new formed SEI mitigating the effects of the enormous volume expansion in the electrode. [1] Zuo X., Zhu J., Müller-Buschbaum P. & Cheng Y.-J. Silicon based lithium-ion battery anodes: A chronicle perspective review. Nano Energy . 31 , 213-143; 10.1016/j.nanoen.2016.11.013 (2017) [2] Eshetu, G.G., Zhang, H., Judez, X. et al. Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes. Nat Commun 12 , 5459; 10.1038/s41467-021-25334-8 (2021) Figure 1

Breaking Kinetic Barriers in Silicon Anodes via Strategic Electrolyte Additive Engineering

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Tailoring Stress and Ion-Transport Kinetics Via a Molecular Layer Deposition-Induced Artificial Solid Electrolyte Interphase for Durable Silicon Composite Anodes

BiSbSi: A New Ternary Layered Si-based Anode for Li-ion Batteries with High Performance

Boron-Doped and Carbon-Controlled Porous Si/C Anode for High-Performance Lithium-Ion Batteries

A Triple Crosslinked Binder with Hierarchical Stress Dissipation and High Ionic Conductivity for Advanced Silicon Anodes in Lithium-ion Batteries

Surface Modification of Micro-Silicon Anode for High-performance Lithium-Ion Batteries

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

Silicon Carbide As a Protective Layer to Stabilize Si-Based Anodes by Inhibiting Chemical Reactions

Synthesis and Electrochemical Characterization of Novel Electrolyte Additives for High Performance in Lithium-Ion Batteries with Si-Based Anodes

Enhanced stability and kinetic performance of sandwich Si anode constructed by carbon nanotube and silicon carbide for lithium-ion battery

Nanostructure designing and hybridizing of high-capacity silicon-based anode for lithium-ion batteries

Strategies for improving the storage performance of silicon-based anodes in lithium-ion batteries

Simultaneous enhancement of initial Coulombic efficiency and cycling performance of silicon-based anode materials for lithium-ion batteries

Improving Electrochemical Performance of Thick Silicon Film Anodes with Implanted Solid Lithium Source Electrolyte

Manipulating charge-transfer kinetics and flow-domain LiF-rich interphase to enable high-performance microsized silicon-silver-carbon composite anode for solid-state batteries

Artificial Solid Electrolyte Interphase Coating to Reduce Lithium Trapping in Silicon Anode for High Performance Lithium‐Ion Batteries