Abstract:Aeration scouring is currently the most common membrane fouling control technology. The optimization of aeration parameters, such as the aeration aperture, aeration pore spacing, and aerator layout height, can improve the efficiency of aeration and reduce the energy consumption of aeration. However, the simulation results cannot guide engineering practices well due to the limitations in the model precision of computational fluid dynamics. On this basis, the study compared and selected the computational fluid dynamics turbulence model. The DES model was used to study the influence of aeration parameters on membrane fouling control. The study showed that the DES turbulence model had a higher precision and accuracy in predicting the average shear force and the instantaneous shear force distribution on the membrane surface than the k-epsilon turbulence model. The average error of the DES turbulence model simulation of a bubble height was only 1.33%, which was 14.33% lower than the 15.66% of k-epsilon. An aeration pore spacing of 20 mm, a height of 100 mm, and an aeration aperture of 2.0 mm were the best layout parameters. The degree of influence of the aeration aperture, the aeration pore spacing, and the height of the aerator layout on the shear force of the membrane surface decreased sequentially. The influence of each interaction on the average shear force of the membrane surface was negligible. Among these parameters, the main reason for the membrane surface shear force was the change in the flow velocity caused by aeration. By calculating the fitting equation and the critical value of the shear force, the critical value of the liquid velocity on the membrane surface that could remove membrane fouling was 0.232 m/s. Although the numerical simulation and optimization of a flat membrane bioreactor air scouring for membrane fouling control were carried out with pure water, it still plays a significant impact on the actual membrane fouling control. These results could guide the optimization design of aeration parameters for flat membrane bioreactors and provide a reference for the analysis of aeration scour control membrane pollution control research.

Numerical simulation of scaling-up for AEC-MBRs regarding membrane module configurations and cyclic aeration modes

CFD Simulation and Optimization of Membrane Scouring and Nitrogen Removal for an Airlift External Circulation Membrane Bioreactor.

Simulation and Optimization of Airlift External Circulation Membrane Bioreactor Using Computational Fluid Dynamics.

Study on Scale-Up of Anaerobic Fermentation Mixing with Different Solid Content

Superior performance of a membrane bioreactor through innovative in-situ aeration and structural optimization using computational fluid dynamics

Computational Fluid Dynamics Simulation As A Tool For Optimizing The Hydrodynamic Performance Of Membrane Bioreactors

Reducing aeration energy consumption in a large-scale membrane bioreactor: Process simulation and engineering application

Hydraulic optimization of membrane bioreactor via baffle modification using computational fluid dynamics.

Effects of various factors on critical flux in submerged membrane bioreactors for municipal wastewater treatment

Numerical Simulation and Optimization of a Cold Model of a Flat Membrane Bioreactor Air Scouring for Membrane Fouling Control

Wastewater treatment in large-scale novel corrugated-sheet MBR

Relationship Between Sludge Characteristics and Membrane Flux Determination in Submerged Membrane Bioreactors

Numerical study of hydrodynamic characteristics in a moving bed biofilm reactor

Innovation and optimization of aeration in free bubbling flat sheet MBRs

Modelling the impacts of operational conditions on the performance of a full-scale membrane aerated biofilm reactor

Evaluating Influence of Filling Fraction of Carriers Packed in Anaerobic Side-Stream Reactors on Membrane Fouling and Microbial Community of the Coupled Membrane Bioreactors.

Effect of Aeration Intensity on Operating Characteristics of Membrane Bioreactors

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor

Effects of Aeration Parameters on Effluent Quality and Membrane Fouling in a Submerged Membrane Bioreactor Using Box–Behnken Response Surface Methodology

Hydrodynamic optimization of membrane bioreactor by horizontal geometry modification using computational fluid dynamics.

A comparison study on membrane fouling in A/O-MBR and A/A-MBR at different mixed liquor-suspended solids concentrations