Abstract:Fouling control strategies play a crucial role in membrane distillation (MD) process, primarily due to the significant limitation of fouling during the scaling-up process. The utilization of microbubbles (MBs) aeration has exhibited promising potential in mitigating membrane fouling when treating high salinity wastewater. Aeration can introduce gas-liquid two-phase flow on the membrane surface, thereby increasing the membrane surface shear force. The mechanism of aeration technology for controlling fouling includes the following points: introduction of gas-liquid two-phase flow; physical substitution of concentration polarization layer; pressure pulses caused by bubbles flowing through the membrane surface and increasement of the cross flow velocity. This research aims to optimizing the effect of air MBs with different concentrations and sizes introduced in the feed side on membrane fouling control, we creatively used the method of releasing pressure gradiently to achieve size regulation of MBs within a certain range for the first time, firstly regulated the generation of MBs by manipulating gas flow rate and release pressure. Under the optimal condition of 40 mL/min and 0.6 MPa, it will yield concentration of 1.58 × 10 4 /mL and D50 Sauter size of 64.69 μm MBs with pure water permeance flux of 12.32 kg/(m 2 ·h). It was observed that higher gas flow rates primarily increased MBs concentration, while lower pressures predominantly reduced MBs size through the method of inline imaging. Experimental results indicated that introduction of MBs can slightly improve the temperature polarization coefficient and mass transfer coefficient under different operating modes. Consequently, further investigations focused on the influence of MBs characteristics on different fouling control. All conditions reach 99 % rejection for inorganic salt and HA. This study provided empirical evidence that higher concentration and larger size of MBs intensify the gas-liquid two-phase flow disruption and exhibit a better shear effect on scaling phenomena, which yield advantageous outcomes in terms of augmenting permeance flux and water vapor production, with permeance flux increased from 40.12 % to 55.42 % for inorganic fouling and increased from 68.35 % to 80.15 % for inorganic and HA fouling. These results were confirmed via membrane surface using scanning electron microscopy and energy dispersive spectroscopy. In summary, this research aided in identifying appropriate operating conditions for mitigating inorganic and composite scaling by implementing air-infused MBs in direct contact membrane distillation (DCMD), which provides scientific and technical guidance for controlling fouling in MD in practical applications.

Numerical Simulation and Optimization of a Cold Model of a Flat Membrane Bioreactor Air Scouring for Membrane Fouling Control

CFD Simulation and Optimization of Membrane Scouring and Nitrogen Removal for an Airlift External Circulation Membrane Bioreactor.

Study on the Membrane Fouling of the Process of Using Two Layer Flat-Sheet Membrane for Sludge Thickening and Water Reuse

Computational Fluid Dynamics Simulation As A Tool For Optimizing The Hydrodynamic Performance Of Membrane Bioreactors

Superior performance of a membrane bioreactor through innovative in-situ aeration and structural optimization using computational fluid dynamics

Influence of operational parameters on membrane pollution characteristics in flat sheet membrane bioreactor

Modelling of Membrane Fouling in a Submerged Membrane Bioreactor

Hydraulic optimization of membrane bioreactor via baffle modification using computational fluid dynamics.

Simulation and Optimization of Airlift External Circulation Membrane Bioreactor Using Computational Fluid Dynamics.

Innovation and optimization of aeration in free bubbling flat sheet MBRs

Effective Control of Membrane Fouling by Filamentous Bacteria in a Submerged Membrane Bioreactor

Relationship Between Sludge Characteristics and Membrane Flux Determination in Submerged Membrane Bioreactors

Effects of Aeration Parameters on Effluent Quality and Membrane Fouling in a Submerged Membrane Bioreactor Using Box–Behnken Response Surface Methodology

A review of CFD simulation in pressure driven membrane with fouling model and anti-fouling strategy

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor

The Comparison Between Vibration and Aeration on the Membrane Performance in Algae Harvesting

Numerical simulation of scaling-up for AEC-MBRs regarding membrane module configurations and cyclic aeration modes

Optimizing fouling mitigation in membrane distillation by controlled microbubble size and concentration

Comparative Study of Membrane Fouling with Aeration Shear Stress in Filtration of Different Substances

New Insights into Membrane Fouling in Submerged Membrane Bioreactor Based on Rheology and Hydrodynamics Concepts

A Comprehensive Study on Membrane Fouling in Submerged Membrane Bioreactors Operated under Different Aeration Intensities