Abstract:Neutrino research is of great importance for particle physics, astrophysics and cosmology. A new global trigger scheme with online vertex fitting has been proposed, aiming at the ultra-low anti-neutrino energy threshold as down to 0.2MeV which is essential for the study of solar neutrino and supernova elastic scattering neutrinos on burst. With the scheme, the time of flight difference of photons fly through the liquid media from the interaction point to the surface of central detector can be corrected online, the trigger window to cover the whole spread of a specific neutrino generated photons can be significantly reduced which lessen the integrated dark noise introduced from the large amount of PMT devices hence a lower energy threshold can be achieved. The scheme is compatible, flexible and easy to implement, it can effectively help the low energy neutrino research topics. INTRODUCTION Neutrino research is a very popular and important topic for particle physics, astrophysics and cosmology. Several new neutrino experiments are now under construction or design such as the JUNO [1] (Jiangmen Underground Neutrino Observatory), a multi-purpose neutrino experiment, and CJPLNE [2] (China JinPing underground Laboratory Neutrino Experiment), a water-based LS neutrino experiment focusing on the solar neutrino and geo neutrino topics. The central detectors of those neutrino experiments consist large sphere or cylinder vessel to contain the giant target material which are 20kt Liquid Scintillator for JUNO and few thousand tons of water-based Liquid Scintillator for CJPLNE. PMTs are applied for photon detection due to the large sensitive area and mature technology. Around 16000 20inch PMTs will be installed for JUNO while around 15000 8inch PMTs are estimated to be deployed for CJPLNE. A neutrino that interacts in the fiducial volume will release charge particles to further generate scintillation light. The light distribute evenly in all directions and finally be captured by the surrounding PMTs and produce electrical signals. The charge and position information of the related event could be further analysed from the PMT signals. TRIGGER SYSTEM The information related to one event must be collected to be distinguished by trigger system which could base on the number of PMTs that have generated signals (multiplicity trigger), or base on the total charge information (energy sum) [3]. Since the multiplicity trigger scheme requires only single hit bit information which is very easy to generate, transmit and process, it is the preferred baseline trigger method, especially for experiments that applies tens of thousands of PMTs. For 20kt LS detector, the physical dimension will be 37meters in diameter, thus the light generated at the edge of the detector will take around 200ns time of flight before reach the PMTs installed on the opposite direction. To cover the TOF time and the slow scintillation components of the LS, the trigger system must open a 300ns time window to cover the full spread of all information from the same event. PMT generates signal pulses due to thermionic emission which is called dark noise that can’t be distinguished from the normal signal. Those dark noise will also be collected during the trigger window that could cause a coincident event. The correspond event rate is a function of trigger window width, dark noise rate and the number of PMT. Figure 1 shows the calculation result of dark noise caused coincidence rate compare to the physical event rate with parameters of 300ns trigger window, 50KHz dark noise for the new developed MCP PMT and 15000 tubes. Figure 1: Event rate of PMT dark noise. By setting the multiplicity threshold to around 400, the dark noise coincidence event can be easily separated from IBD neutrino events that have a minimum deposit energy of 0.7MeV. But for solar neutrino and supernova elastic scattering neutrino physics, many interesting phenomena are located at the energy range as low as 0.2MeV, the multiplicity distribution of such low energy event heavily overlaps with the PMT dark noise. While approaching the low energy range, the trigger rate increases significantly. Since flash ADC is applied to ____________________________________________ *Work supported by the National Science Foundation of China (No. 11275111), the State Key Laboratory of Particle Detection and Electronics. * Proceedings of ICALEPCS2015, Melbourne, Australia THHB2O03 Hardware Technology ISBN 978-3-95450-148-9 1107 C op yr ig ht © 20 15 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s record the waveform of each PMT hit, the increased event rate requires high bandwidth DAQ and make the readout electronics difficult and expensive. A possible solution to the problem could come from the awareness of the vertex position information in the trigger system. The vertex could be used to correct the propagation time difference to concentrate the correlated PMT hits into a much narrower time region. Then a smaller trigger window could be used which reduces the PMT dark noise and a much lower energy threshold can be achieved. Furthermore, the threshold could even be adapted to the vertex position, which could better handle the issue of light attenuation effect, spatial effect of energy response and radioactive background at the edge of the scintillator volume due to supporting material. VERTEX FITTING CONCEPT To calculate the vertex position, a charge weighted mean position algorithm is widely used in offline analyse. To implement a similar algorithm in the trigger system is very challenging, and the readout electronics will also need to implement real time algorithm to extract the charge information for each hit, otherwise it could just simply transmit raw waveform data for triggered events. Unlike direct calculation, the vertex fitting method tests the PMT information with all possible positions and finds the most likely one among them. The detailed process contains the following aspects:  Divide the whole detector volume into certain number of blocks. Since each block is treated as one position, the time difference caused by the dimension of the block should be negligible compare to the trigger window; on the other hand, small block size will cause an unacceptable block quantity. The size of the block should be optimized to compromise the two influences.  For each block, a TOF correction map can be calculated and applied to the original PMT signals respectively. For events located inside the block, the correction map could approximately compensate the propagation time and merge the widely spread PMT hits to a much narrower time region thus a small trigger window could be applied.  For each block, a threshold that is adapted with the block position and radioactive background is compared to generate the local block trigger signal.  All local block trigger signals are logically “OR”ed to generate the final trigger. The TOF correction, multiplicity calculation and comparison are identical for all blocks that can be handled simultaneously by parallel process architecture. The concept of vertex fitting is illustrated in Figure 2. Figure 2: Vertex fitting concept. SIMULATION AND FEASIBILITY Simulation result in Figure 3 shows the dependency of event position and PMT hit time distribution in a 37 meter diameter sphere vessel. Figure 3: Hit time distribution with vertex position. The time distribution of events with distance difference of 2.5 meters from the centre can be distinguished clearly even with 25 ns time resolution. The improvement of energy threshold by reducing the trigger window is shown in the simulation result in Figure 4. With 50 ns trigger window, the PMT dark noise can be removed from 0.2MeV event. Figure 4: Event rate of PMT dark noise. From the simulation, 5 meter is taken as a reasonable block size. The time difference inside the block itself is about 35ns, acceptable for 50ns trigger window. THHB2O03 Proceedings of ICALEPCS2015, Melbourne, Australia ISBN 978-3-95450-148-9 1108 C op yr ig ht © 20 15 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s

Trigger Study for KM3Net-Italia

Resonant Rayleigh Scattering in Ordered and Intentionally Disordered Semiconductor Superlattices

Status of NEMO: results from the NEMO Phase-1 detector

Measurement of the atmospheric muon flux with the NEMO Phase-1 detector

Development of a trigger for acoustic neutrino candidates in KM3NeT

Research and Development of a Muon Entrance Trigger for the Muedm Experiment at PSI

40 MHz triggerless readout of the CMS Drift Tube muon detector

The Global Trigger with Online Vertex Fitting for Low Energy Neutrino Research

Third Level Trigger for the Fluorescence Telescopes of the Pierre Auger Observatory

The muon high level trigger of the ATLAS experiment

Triggering and data acquisition for the Hyper-Kamiokande experiment

The Trigger System of the CMS Experiment

A versatile dielectron trigger for nucleon-nucleon and nucleus-nucleus collisions

Trigger efficiencies of a proposed beam monitoring detector (BeBe) for p+p collisions at NICA energies

Simulation Study of the Electromagnetic Calorimeter Triggers in Bes Iii

The CMS High Level Trigger

Hierarchical Trigger of the ALICE Calorimeters

The PHENIX Muon Trigger Upgrade

Extending JUNO’s Astrophysical Reach with a Low-Energy Multi-Messenger Trigger System

Status of the NEMO project

Lowering the Energy Threshold of the CUORE Experiment: Benefits in the Surface Alpha Events Reconstruction