Abstract:Traditional methods for achieving hierarchical surface structures include highly specified, deterministic approaches to create features to meet design intention. In this study microstructural alteration was undertaken using laser apparatus and secondary texturing was achieved via succeeding electrochemical processes. Electrochemical jet machining (EJM) was performed on mild steel subjected to laser pre-treatment using power densities of 4167 and 5556W/cm2 with pulse durations from 0.3–1.5s. Results show that in combination, laser pre-treatment and EJM can alter the exposed surface textures and chemistries. Here, machined surface roughness (Sa) was shown to increase from approximately 0.45μm for untreated surfaces to approximately 18μm for surfaces subjected to extreme laser pre-treatments. After pre-treatments materials were characterised to appraise microstructural changes, shown to be martensite formation, reinforced by complementary simulation data, and significant increases in observable hardness from approximately 261HV for the as-received material to over 700HV after pre-treatment. The greater hardness was retained after EJM. Exposed martensitic lath structures at machined surfaces are shown to be partially responsible for surface roughness increases. The surfaces were explored with energy dispersive X-ray spectroscopy (EDS) and Raman spectroscopy demonstrating changes in apparent surface chemistry. This analysis revealed increasing oxide formation at the surface of the pre-treated EJM surface, a further contributory factor to surface roughness increases. This new process chain will be of interest to manufacturers seeking to control surface morphology for applications including micro-injection mould/die manufacture. While demonstrated here for steel similar mechanisms are exploitable in other material systems. A new technique has been demonstrated, resulting from the models and processes presented to couple laser and electrolyte jet processing for complex surface preparation.

Laser cleaning for rust removal on mild steel: An experimental study on surface characteristics

Empirical Study of Laser Cleaning of Rust, Paint, and Mill Scale from Steel Surface

Simulation and experimental study on laser cleaning of paint-rust mixed layer on a Q235 surface

Mechanism Research and Equipment Development of Laser Cleaning Rust

The effect of laser cleaning on metallurgical properties and intergranular corrosion behavior of 304 stainless steel

Mechanism and characterization of nanosecond laser rust-removal on AH36 steel

Effect of laser rust removal on surface roughness of 3Cr2Mo die steel

Effect of High-Power Laser Cleaning for Surface Contaminants Removal on SS304L

Ultraviolet laser cleaning and surface characterization of AH36 steel for rust removal

Effect of Ultrasonic Cleaning after Laser Texturizing of Surface of AISI 316L Steel on the Degree of Wetting and Corrosion Resistance

Laser derusting on low carbon steel surface based on coordinated application of machine vision and laser-induced breakdown spectroscopy

Laser Treatment as a New Approach to the Passivation of Iron-Based Historical Monuments

Surface modification of mild steel using a combination of laser and electrochemical processes

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Effect of laser power on cleaning mechanism and surface properties

Wear and corrosion behaviors of high-power laser surface-cleaned 304L stainless steel

Characterization of a Laser Surface-Treated Martensitic Stainless Steel

Microstructure and Properties of Laser Surface Melted AISI 316L Stainless Steel

A characterization of laser cleaning painting layer from steel surface based on thermodynamic model

Laser surface cleaning of simulated radioactive contaminants in various technological environments

Welding Defect and Mechanical Properties of Nanosecond Laser Cleaning 6005A Aluminum Alloy