Comparative study of electrochemical wastewater treatment processes for bilge water as oily wastewater: A kinetic approach

Kubra Ulucan,Ugur Kurt

DOI: https://doi.org/10.1016/j.jelechem.2015.04.005

IF: 4.598

2015-06-01

Journal of Electroanalytical Chemistry

Abstract:In this study treatability of bilge water was investigated by electrochemical processes: electrocoagulation/electroflotation process and also the electro-fenton process as an indirect electrooxidation process. As the seawater is mixed into bilge water, the chloride content and the conductivity of bilge water are quite high, which is a great advantage in terms of electrochemical wastewater treatment. Treatability of bilge water by electrocoagulation/electroflotation process is investigated by using aluminum and iron electrodes in accordance with pH, time, temperature and current density. When the aluminum and iron electrodes are compared in electrocoagulation–electroflotation process, the results clearly showed that the aluminum electrodes were more efficient and as well as in a short period of time as 10min. Chemical oxygen demand and oil–grease removal values obtained as 64.8% and 57% from Al and 36.2% and 12.5% from Fe, respectively. On the other hand by electro-fenton process, it was seen that higher removal efficiencies were obtained in comparison to the electrocoagulation method, with the COD and oil–grease removal being equal to 71% and 69%, respectively. The discharge standards specified by MARPOL were obtained by the electro-fenton process. When processes are analyzed in economically way, the electricity cost of electrocoagulation process by aluminum, iron and electro-fenton process was 0.54$/m3, 0.53$/m3, 0.51$/m3, respectively. In addition, pseudo-second-order kinetic model was fitted for both COD and Oil&Grease removal in electrocoagulation process.

chemistry, analytical,electrochemistry