Abstract:This paper provides the information on the optimum conditions of the treatment process of the boat pressure washing wastewater (BPWW) by the combination of the ozonation and electrochemical (EC) methods developed on the laboratory and pilot plant scale. The initial effluent was highly enriched in heavy metals and elevated levels of organic contaminants. The concentrations of V, Cr, Fe, Cu, Zn, TOC, and COD exceeded the upper permissible limits of 22, 20, 6, 112, 17, 4, and 2 times, respectively. The main mechanisms of the organic matter destruction were the ozone oxidation and the indirect oxidation with chlorine/hypochlorite formed by the anodic oxidation of chloride already present in the wastewater. The heavy metal removal was forced by the coagulation/flocculation using Fe(2+), Fe(3+), and Al(3+) ions released into the treated solution by electrochemical corrosion of the sacrificial stainless steel and aluminum electrodes. At the optimum conditions obtained with the pilot plant, the removal efficiencies of the parameters V, Cr, Fe, Ni, Cu, Zn, Pb, TOC, and COD were 100.00 %, 99.35 %, 99.51 %, 87.31 %, 99.83 %, 99.65 %, 100.00 %, 88.46 %, and 76.28 %, respectively. All the parameters in the final effluent were in agreement with regulated values. The advantages of this system compared to its physico-chemical counterparts are as follows: (1) no need for the external addition of flocculating agents since they are electrochemically generated inside the treatment tank; (2) minimal pH changes during the treatment process not requiring pH adjustment by acids/basis; (3) a significantly lower amount of sludge since only Fe and Al ions were released in the solution; (4) flocs formed by the electrocoagulation can be easily separated by the filtration due to their higher stability, lower content of the bound water and larger surface compared to chemical flocs; (5) the final EC effluent is clear, colourless and odourless, containing the less total dissolved solids and organics, thence more suitable for the reuse compared to the one obtained by the standard chemical treatment.

The investigation of parameters affecting the treatment of synthetic bilge water by continuous electrooxidation/flotation process

Comparative study of electrochemical wastewater treatment processes for bilge water as oily wastewater: A kinetic approach

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

The application of the ozonation/electrocoagulation treatment process of the boat pressure washing wastewater

Improving Biological Treatment of Real Bilge Wastewater With Zero Valent Iron and Activated Charcoal Addition

The Investigation of COD Treatment and Energy Consumption of Urban Wastewater by a Continuous Electrocoagulation System

Shipboard Bilge Water Treatment by Electrocoagulation Powered by Microbial Fuel Cells

Optimizing TOC and COD removal for the biodiesel wastewater by electrocoagulation

Domestic greywater treatment using electrocoagulation-electrooxidation process: optimisation and experimental approaches

Effect of current density on COD removal efficiency for wastewater using the electrocoagulation process

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Investigation of oil content removal performance in real oily wastewater treatment by electrocoagulation technology: RSM design approach

Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

Boosting BOD/COD biodegradability of automobile service stations wastewater by electrocoagulation

Combination of electrocoagulation and electrooxidation processes for treatment of real wood processing effluents

Advancements in bilge wastewater treatment: A review for current and future trends

Alternative sequential combinations of electrocoagulation with electrooxidation and peroxi-coagulation for effective treatment of adhesive production industry wastewater

Optimization of electro‐oxidation and electro‐Fenton techniques for the treatment of oilfield produced water

Treatment of oily wastewater with iron-carbon internal electrolysis process enhanced by ultrasonic

Achieving simultaneous biological nutrient removal and sludge minimization from marine ship sewage based on an innovative Landscape Integrated Ecological Treatment System (LIETS)