Abstract:A vectorized analytical model for the cutting dynamics in the spiral bevel gear face hobbing process has been developed, which is based on machine tool kinematics and vibration vectorization. The structural modal parameters of the cutter head spindle system are obtained through experimental modal analysis with hammer impact testing. The analytical model is utilized to simulate the generation of simulated vibration acceleration signals during spiral bevel gear hobbing. A wavelet threshold denoising method is applied to process the simulated vibration signals of the spiral bevel gear face hobbing with added white noise. Signal processing methods, including short-time Fourier transform are employed for time-domain analysis, frequency-domain analysis, and time–frequency-domain analysis of measured signals and simulated signals, thereby extracting the corresponding statistical features. In addition to the results of the experimental modal analysis, the causes of chatter in spiral bevel gear hobbing are discussed in detail, revealing that the main factor is cutter head vibration in the Y direction of the Hunan ZDCY CNC EQUIPMENT YKA2260 machine tool used in this research. The error in the time-domain characteristic parameters between simulated signals and measured vibration acceleration signals is within 15%, with a difference of 3.5% in spectral peak values. The predicted tooth surface morphology from simulation matches the actual morphology on the workpiece, comprehensively validating the reliability of the cutting dynamics model for the spiral bevel gear face hobbing process. Another conclusion drawn from numerical simulation experiments is that the amount of tooth surface waviness of the spiral bevel gears is the ratio of tool chatter frequency to cutting fundamental frequency.

An efficient vectorization solution to cutting dynamics modeling for face-hobbing of hypoid gears

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Chatter and Surface Waviness Analysis in Oerlikon Face Hobbing of Spiral Bevel Gears

Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models

Cutting Force Fluctuation Suppression and Error Homogenization of Noncircular Gear Hobbing Based on the Tool Shifting Method

Advanced Computer Aided Design Simulation of Gear Hobbing by Means of Three-Dimensional Kinematics Modeling

Energy modeling and a method for reducing energy loss due to cutting load during machining operations

Modeling of the Effects of Phase Shift on Cutting Performance in Elliptical Vibration Cutting

Hybrid Dynamic Modeling and Analysis of High-Speed Thin-Rimmed Gears

Modeling of micro-tooth topography in face gear grinding considering dynamic features of geometric-kinematic

Experimental analysis and modeling of cutting power model

Prediction and optimization of hobbing gear geometric deviations

Simulation and experimental study of tool wear in high-speed dry gear hobbing

Dynamics Modeling-Based Optimization of Process Parameters in Face Milling of Workpieces with Discontinuous Surfaces

Dynamic simulation and active vibration control design of an ultra-precision fly-cutting machine tool

A precision generating hobbing method for face-gear based on worm hob

Hybrid multibody system method for the dynamic analysis of an ultra‐precision fly‐cutting machine tool

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Precise modeling of complex tooth surface microtopography and multi-degree-of-freedom nonlinear friction dynamics for high-performance face gear

Optimal calculation and experimental study on cutting force of low-angle straight tooth face gear by power skiving

Study on mapping rules and compensation methods of cutting-force-induced errors and process machining precision in gear hobbing