Abstract:Based on the three-dimensional (3D) finite element method (FEM) and Taguchi method (TM), this paper analyzes the tooth surface contact stress (TSCS) of spur gears with three different influence factors: tooth profile deviations (TPD), meshing errors (ME) and lead crowning modifications (LCM), especially researching and analyzing the interactions between TPD, ME and LCM and their degree of influence on the TSCS. In this paper, firstly, a 3D FEM model of one pair of engaged teeth is modeled and the mesh of the contact area is refined by FEM software. In the model, the refined area mesh and the non-refined area mesh are connected by multi-point constraint (MPC); at the same time, in order to save the time of the FEM solution on the premise of ensuring the solution’s accuracy, the reasonable size of the refined area is studied and confirmed. Secondly, the TSCS analyses of gears with one single influence factor (other factors are all ideal) are carried out. By inputting the values of different levels of one single factor into the FEM model, especially using the real measurement data of TPD, and conducting the TSCS analysis under different torques, the influence degree of one single factor on TSCS is discussed by comparing the ideal model, and it is found that when the influence factors exist alone, each factor has a great influence on the TSCS. Finally, through TM, an orthogonal test is designed for the three influence factors. According to the test results, the interactions between the influence factors and the influence degree of the factors on the TSCS are analyzed when the three factors exist on the gear at the same time, and it is found that the TPD has the greatest influence on the TSCS, followed by the lead crowning modified quantity. The ME is relatively much small, and there is obvious interaction between ME and LCM. In addition, the optimal combination of factor levels is determined, and compared with the original combination of a gear factory, we see that the contact fatigue performance of the gear with the optimal combination is much better. The research of this paper has a certain reference significance for the control of TPD, ME and LCM when machining and assembling the gears.

Optimal calculation and experimental study on cutting force of low-angle straight tooth face gear by power skiving

Machining and meshing analysis of face gears by power skiving

Predictions of Cutting Force and Tool Wear in Gear Power Skiving

Research on machining nonorthogonal face gears by power skiving with tooth flank modification based on a six-axis machine tool

A comprehensive optimization method for considering the theoretical and practical machining errors to the accurate power skiving of spur face gears by optimizing both cutting edges and tool path

A fundamental analytical model for micro topography of skived gear surface

Research on the skiving technology of face gear

Research on the design of skiving tool for machining involute gears

Computational Optimization of the Basic Data and Tooth Form Parameters Based on the Contact Strength for Hypoid Gear

Simulation and experimental study of tool wear in high-speed dry gear hobbing

Geometric design and analysis of face-gear drive with involute helical pinion

A finishing method for the continuous generation of spur face gears with shaving cutters

Analysis on wear patterns and mechanisms of carbide tool for face-hobbing of spiral bevel gear

Modeling of micro-tooth topography in face gear grinding considering dynamic features of geometric-kinematic

Analysis and optimization of gear skiving parameters regarding interference and theoretical machining deviation based on chaos map

Computerized determination of the qualified region of main design parameters of face-milled hypoid gears with low shaft angle

Precise modeling of complex tooth surface microtopography and multi-degree-of-freedom nonlinear friction dynamics for high-performance face gear

A cylindrical skiving tool design method based on a conjugate surface for internal gear manufacture

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

Research on shaving processing of spiroid face gear

Analysis and Optimization of Tooth Surface Contact Stress of Gears with Tooth Profile Deviations, Meshing Errors and Lead Crowning Modifications Based on Finite Element Method and Taguchi Method