Abstract:Proton conductor-based solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs) are receiving increasing attention because of their potential for operation at intermediate temperatures (400 - 600 o C) with high energy efficiency at low cost. In addition, water is formed/provided on the air electrode side of proton-conducting cells, effectively avoiding fuel dilution and nickel oxidation problems associated with oxide-ion conductor-based cells. To date, doped barium cerates-based perovskite oxides are the most widely adopted proton conducting electrolytes due to their desired electrochemical properties. To achieve high proton conductivity, acceptor doping with rare earth elements is a commonly used strategy, which is critical to the formation of protonic defects. Although many trivalent elements have been studied as dopants in the barium cerate family and reasonable electrochemical performance has been demonstrated, the effect of acceptor dopants on other properties of electrolyte materials, especially in single cells under operating conditions, is yet to be studied in detail. In this presentation, we will report our recent progress in the development of a series of acceptor-doped proton-conducting electrolytes. The results reveal that conductivity, transference number, chemical stability, and compatibility with NiO are all closely correlated with dopant size. In particular, the reactivity with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, an optimized electrolyte shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, reversible protonic ceramic electrochemical cells (R-PCECs) based on the optimized electrolyte demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.2 W cm -2 at 600 o C in the fuel cell mode and a high current density of 2.0 A cm -2 at 1.3 V and 600 o C in the steam electrolysis mode while maintaining long-term durability for over 1000 h without obvious degradation.

Boosting high-performance in Zr-rich side protonic solid oxide electrolysis cells by optimizing functional interlayer

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Enhanced Performance of Protonic Solid Oxide Steam Electrolysis Cell of Zr-Rich Side BaZr0.6Ce0.2Y0.2O3-δ Electrolyte with an Anode Functional Layer

Weakly Solvating Effect Spawning Reliable Interfacial Chemistry for Aqueous Zn/Na Hybrid Batteries

High Performance and Stability Enabled by Tuning the Component Thermal Expansion Coefficients of a Proton-Conducting Solid Oxide Cell Operating at High Steam Concentration

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

Synergistic Coupling of Proton Conductors BaZr0.1Ce0.7Y0.1Yb0.1O3-δ and La2Ce2O7 to Create Chemical Stable, Interface Active Electrolyte for Steam Electrolysis Cells

A Zn-Doped Ba0.5Sr0.5Co0.8Fe0.2O3-δ Perovskite Cathode with Enhanced ORR Catalytic Activity for SOFCs

(Invited) Advanced Electrode and Electrolyte Materials for Proton Conducting Solid Oxide Electrolysis Cells

Enhancing the Performance of the p-n Heterostructure Electrolyte for Solid Oxide Fuel Cells via A-Site-Deficiency Engineering

Nanoarchitecturing hydrogen electrode with intimately coupled ion-conducting and catalytic phases for enhanced intermediate-temperature steam electrolysis

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells

Solid oxide electrolyzer positive electrodes with novel microstructure show unprecedented stability at high current densities

Structure, synthesis, properties and solid oxide electrolysis cells application of Ba(Ce, Zr)O3 based proton conducting materials

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Boosting the Anode and Cathode Stability Simultaneously by Interfacial Engineering via Electrolyte Solvation Structure Regulation Toward Practical Aqueous Zn‐ion Battery