Abstract:High-theoretical-capacity silicon anodes hold promise in lithium-ion batteries (LIBs). Nevertheless, their huge volume expansion (∼300%) and poor conductivity show the need for the simultaneous introduction of low-density conductive carbon and nanosized Si to conquer the above issues, yet they result in low volumetric performance. Herein, we develop an integration strategy of a dually encapsulated Si structure and dense structural engineering to fabricate a three-dimensional (3D) highly dense Ti3C2Tx MXene and graphene dual-encapsulated Si monolith architecture (3C2Tx@G). Because of its high density (1.6 g cm–3), high conductivity (151 S m–1), and 3D dense dual-encapsulated Si architecture, the resultant 3C2Tx@G monolith anode displays an ultrahigh volumetric capacity of 5206 mAh cm–3 (gravimetric capacity: 2892 mAh g–1) at 0.1 A g–1 and a superior long lifespan of 800 cycles at 1.0 A g–1. Notably, the thick and dense monolithic anode presents a large areal capacity of 17.9 mAh cm–2. In-situ TEM and ex-situ SEM techniques, and systematic kinetics and structural stability analysis during cycling demonstrate that such superior volumetric and areal performances stem from its dual-encapsulated Si architecture by the 3D conductive and elastic networks of MXene and graphene, which can provide fast electron and ion transfer, effective volume buffer, and good electrolyte permeability even with a thick electrode, whereas the dense structure results in a large volumetric performance. This work offers a simple and feasible strategy to greatly improve the volumetric and areal capacity of alloy-based anodes for large-scale applications via integrating a dual-encapsulated strategy and dense-structure engineering.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11298.Supplemental experimental section (synthesis of Ti3C2Tx MXene and in-situ TEM observation), calculation methods (S1–S5) for volumetric density, compacted density, the content of Si, conductivity, volumetric capacity, and matching principle for the full cell, and additional results in Figures S1–S14 and Table S1 (PDF)Supplementary video S1 showing the first lithiation and delithiation process at 40× (MP4)Supplementary video S2 showing the second to fifth lithiation process at 100× (MP4)This article has not yet been cited by other publications.

An integrated self-healing anode assembled via dynamic encapsulation of liquid metal with a 3D Ti 3 C 2 T x network for enhanced lithium storage

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

An Ultrastable Lithium Metal Anode Enabled by Designed Metal Fluoride Spansules

A Room-Temperature Self-Healing Liquid Metal-Infilled Microcapsule Driven by Coaxial Flow Focusing for High-Performance Lithium-Ion Battery Anode.

Boosting the Intrinsic Stability of Lithium Metal Anodes by an Electrochemically Active Encapsulating Framework

Assembled MXene-Liquid Metal Cages on Silicon Microparticles as Self-Healing Battery Anodes

Highly lithiophilic Ti3C2T -Mxene anchored on a flexible carbon foam scaffolds as the basis for a dendrite-free lithium metal anode

A self-healing liquid metal-based flexible anode for next-generation lithium-ion batteries

Boosting the Intrinsic Stability of Lithium Metal Anodes by an Electrochemically Active Encapsulating Framework (adv. Energy Mater. 45/2023)

Polysiloxane Cross‐Linked Mechanically Stable MXene‐Based Lithium Host for Ultrastable Lithium Metal Anodes with Ultrahigh Current Densities and Capacities

Interconnected Metallic Membrane Enabled by MXene Inks Toward High‐Rate Anode and High‐Voltage Cathode for Li‐Ion Batteries

Self-healing liquid metal nanoparticles encapsulated in hollow carbon fibers as a free-standing anode for lithium-ion batteries

A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes

Self-Propagating Enabling High Lithium Metal Utilization Ratio Composite Anodes for Lithium Metal Batteries

High-Rate and Large-Capacity Lithium Metal Anode Enabled by Volume Conformal and Self-Healable Composite Polymer Electrolyte

Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer

Interfacial modulation of hollow ZnS-SnS2 microboxs by Ti3C2Tx MXene to construct three-dimensional hybrid anodes for lithium-ion batteries with ultra high stability at low temperature

In Situ Alloying Enabled by Active Liquid Metal Filler for Self-Healing Composite Polymer Electrolytes

3D Flexible, Conductive, and Recyclable Ti3C2Tx MXene-Melamine Foam for High-Areal-Capacity and Long-Lifetime Alkali-Metal Anode.

Integrating Dually Encapsulated Si Architecture and Dense Structural Engineering for Ultrahigh Volumetric and Areal Capacity of Lithium Storage

Three-dimensional Stable Lithium Metal Anode with Nanoscale Lithium Islands Embedded in Ionically Conductive Solid Matrix.