Abstract:Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (PSCFNx, x=0.1,0.2) catalysts are prepared and utilized as electrodes in symmetric solid oxide fuel cells (SOFCs) for hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR). Although, the PSCFNx cathode retains its perovskite phase during operation in SOFCs, the anode is totally decomposed and decorated with exsolved metallic Ni-Fe alloy (denoted as re-PSCFN) in a reducing atmosphere. Electrochemical impedance spectroscopy (EIS) combined with distribution of relaxation times (DRT) analysis reveals that the rate-limiting step for the HOR at the anode is the hydrogen adsorption-dissociation process. While the charge transfer process is found to dominate the ORR at the cathode. As the doping of Ni is increased, the cathode polarization resistance for ORR decreases from 0.19 Ω·cm2 for PSCFN0.1 to 0.09 Ω·cm2 for PSCFN0.2 at 800 °C in air. A similar trend is observed for the anode polarization resistance for HOR, which exhibits a reduction from 2.46 Ω·cm2 of re-PSCFN0.1 to 1.28 Ω·cm2 of re-PSCFN0.2 at 800 °C in H2. When fueled with hydrogen, the single cell based on the PSCFN0.2/La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM)(240μm)/re-PSCFN0.2 configuration delivers a maximum power density of 623 mW·cm-2 and slight performance degradation when operated for 220 h at 800 °C. Ni doping results in the charge redistribution of B-site ions. Increasing the doping level of Ni results in additional electron transfer channels and oxygen vacancies that adsorb more oxygen species, which facilitates the ORR performance. Furthermore, an increase in the number of Ni-Fe nanoparticles and creation of abundant interfaces in the anode promotes HOR. This work suggests that PSCFN0.2 has the potential to be an excellent electrode material for a symmetric SOFC.

Ni–La2O3 cermet hydrogen electrode originating from the in-situ decomposition of the La2NiO4+δ oxide for quasi-symmetrical solid oxide fuel cells

Electrochemical performance of La2NiO4+δ-Ce0.55La0.45O2−δ as a promising bifunctional oxygen electrode for reversible solid oxide cells

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

Applying multifunctional perovskite LaNiO3 as electrolyte and anode for low‐temperature solid oxide fuel cell

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Advanced Symmetric Solid Oxide Fuel Cell With An Infiltrated K2nif4-Type La2nio4 Electrode

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

Oxygen vacancies-rich iron-based perovskite-like electrodes for symmetrical solid oxide fuel cells

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Robust Ni-doped Ruddlesden-popper (La,Sr)Fe1-xNixO4+δ oxide as solid oxide cells fuel electrode for CO2 electrolysis

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

Self-assembled cathode induced by polarization for high-performance solid oxide fuel cell

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Evaluation of Cu-substituted La1.5Sr0.5NiO4+δ as air electrode for CO2 electrolysis in solid oxide electrolysis cells

A High-Performance and Durable Direct-Ammonia Symmetrical Solid Oxide Fuel Cell with Nano La0.6Sr0.4Fe0.7Ni0.2Mo0.1O3−δ-Decorated Doped Ceria Electrode