Abstract:Cast iron pipes are commonly applied in drinking water distribution systems (DWDSs); peroxymonosulfate (PMS) is a promising alternative for drinking water disinfection; organic micropollutants is still present in drinking water after waterworks' treatment. However, iron corrosion products may affect the reactions between a disinfectant and organic micropollutants. The study investigated the transformation of iopamidol (IPM) and atrazine (ATZ) by PMS under the catalysis of a composite iron corrosion product (Fe/Fe3O4). The pseudo-first-order rate constants (k) for the degradation of IPM and ATZ were 1.47 and 1.03 min–1, respectively. Electron paramagnetic resonance (EPR) experiments indicated that PMS was effectively activated to yield sulfate radical (SO4•−) and hydroxyl radical (HO•), mainly via the reduction by Fe component, dissolved Fe2+ and generated <math>Feocta2+</math>. SO4•− contributed more than HO• to the degradation of IPM and ATZ, and the radical yield achieved 0.97 mol/mol. The k values reached maximum with Fe/Fe3O4 and PMS doses of 2.5 g L–1 and 25 mg L–1, respectively. The optimum mass fraction of Fe3O4 in Fe/Fe3O4 (MFmag) and pH were 10% and 7.0, respectively. The k values increased with increasing temperature, while decreased in the presence of water matrix. Most of the iodine released from IPM was oxidized to IO3−, and NH4+ was the dominant species of nitrogen released from ATZ. The identification of transformation intermediates showed that the radical chain reactions of IPM was mainly initiated from single electron transfer and radical adduct formation, while those of ATZ was primarily initiated from hydrogen atom abstraction and radical adduct formation.

Transformation of iopamidol and atrazine by peroxymonosulfate under catalysis of a composite iron corrosion product (Fe/Fe3O4): Electron transfer, active species and reaction pathways

Enhanced Degradation of Iopamidol by Peroxymonosulfate Catalyzed by Two Pipe Corrosion Products (cuo and Δ-Mno2).

Mechanisms of Iopamidol Transformation Catalyzed by a Copper Corrosion Product (C-Cu2o) During Peroxymonosulfate Disinfection

The Role of Ligand in the Activation of Peroxymonosulfate by Fe3O4 for the Degradation of Organic Pollutants

Catalytic Oxidation of Contaminants by Fe0 Activated Peroxymonosulfate Process: Fe(IV) Involvement, Degradation Intermediates and Toxicity Evaluation

Activation of Peroxymonosulfate by WTRs-based Iron-Carbon Composites for Atrazine Removal: Performance Evaluation, Mechanism Insight and Byproduct Analysis

Peroxysulfur species-mediated enhanced oxidation of micropollutants by ferrate(VI): Peroxymonosulfate versus peroxydisulfate

Activation of Peroxymonosulfate Using Drinking Water Treatment Residuals for the Degradation of Atrazine.

Transformation mechanisms of iopamidol by iron/sulfite systems: Involvement of multiple reactive species and efficiency in real water

Enhancement of the Degradation of Atrazine Through CoFe2O4 Activated Peroxymonosulfate (PMS) Process: Kinetic, Degradation Intermediates, and Toxicity Evaluation

New Insights into Atrazine Degradation by Cobalt Catalyzed Peroxymonosulfate Oxidation: Kinetics, Reaction Products and Transformation Mechanisms

Constant oxidation of atrazine in Fe(III)/PDS system by enhancing Fe(III)/Fe(II) cycle with quinones: Reaction mechanism, degradation pathway and DFT calculation.

Accelerated Degradation of Iopamidol in Iron Activated Persulfate Systems: Roles of Complexing Agents

Peroxymonosulfate activation by trace iron (III) porphyrin for facile degradation of organic pollutants via nonradical oxidation

Efficient Peroxymonosulfate Activation by CuO-Fe2O3/MXene Composite for Atrazine Degradation: Performance, Coexisting Matter Influence and Mechanism

Catalytic degradation of micropollutant by peroxymonosulfate activation through Fe(III)/Fe(II) cycle confined in the nanoscale interlayer of Fe(III)-saturated montmorillonite

Surface Fe(III)/Fe(II) Cycle Promoted the Degradation of Atrazine by Peroxymonosulfate Activation in the Presence of Hydroxylamine

Catalysis of cupric and cuprous oxides in copper pipes on the diatrizoate transformation with peroxymonosulfate as a disinfectant

Degradation of Atrazine in Water by Bi2MoO6 and Visible Light Activated Fe3+/peroxymonosulfate Coupling System.

Efficient Degradation of Atrazine with Porous Sulfurized Fe2O3 As Catalyst for Peroxymonosulfate Activation

Activation of peroxymonosulfate by cobalt-impregnated biochar for atrazine degradation: The pivotal roles of persistent free radicals and ecotoxicity assessment