Wastewater treatment performance of a filtration bio-reactor equipped with a mesh as a filter material

Yoshiaki Kiso,Yong-Jun Jung,Takashi Ichinari,Minsoo Park,Takane Kitao,Kazuyuki Nishimura,Kyung-Seok Min

DOI: https://doi.org/10.1016/s0043-1354(00)00201-3

IF: 12.8

2000-12-01

Water Research

Abstract:The mesh filtration bio-reactor (MFBR) was equipped with a nylon mesh as filter material instead of a microfiltration membrane in a membrane bio-reactor. Laboratory scale MFBRs were used for the experiments. We have observed that a mesh having a pore size of 100 μm effectively rejected activated sludge and that the reactor retained SS of up to 9000 mg·l−1 with a flux of 0.5–0.76 m·day−1 at very low pressure (5–10 mm-H2O). The study also revealed that the sludge layer formed at the mesh surface plays an essential role in separating activated sludge.The synthetic wastewater (BOD:200 mg·l−1, T-N:50 mg·l−1. T-P:5.7 mg·l−1) was fed to the reactor under the following conditions: HRT of 4–8 h, continuous feeding, continuous filtration, and continuous or intermittent aeration. Under these conditions, SS and BOD of the effluent were less than 1.5 mg·l−1 and 5.0 mg·l−1, respectively. Under intermittent aeration conditions T-N removal attained 80 %, although the mesh filter was clogged in 1–2 weeks. In addition, when the filtration bio-reactor was applied to an A2O process, effective T-N removal was obtained without clogging of the mesh filter for 2 months. These results show that a MFBR can be of use as an alternative advanced wastewater treatment system.

environmental sciences,engineering, environmental,water resources