Abstract:Abstract Electrofusion joint is a principal connection method within non-metallic pipeline systems, and the mechanical strength of electrofusion joints is of great importance to achieve safe operation of pipeline systems. By manufacturing the electrofusion joints with short carbon fiber reinforced thermoplastic composites (SCFRTCs), the mechanical strength of electrofusion joints has been significantly improved, which shows great potential in mechanical enhancement of electrofusion joints. However, due to inherent stress concentrations within the joint structure and the limited ductility characteristic of SCFRTCs, SCFRTCs electrofusion joints are prone to crack propagation failure. Elucidating the failure mechanics of SCFRTCs electrofusion joints is vital for their continuous refinement and the secure operation of pipeline systems. In this study, SCFRTCs were first prepared and their fundamental mechanical properties were investigated. Subsequently, electrofusion joints were manufactured by SCFRTCs. A finite element models, combined with contour integral method, was developed to ascertain the crack propagation failure mode of SCFRTCs electrofusion joints. The influence of yield strength of SCFRTCs and wall thickness of joints on crack initiation of SCFRTCs electrofusion joints were systematically analyzed. The results demonstrated that the stress level in most areas along the wall thickness is low when the crack in the joint initiates. Increase in joint wall thickness and material yield strength can improve the internal pressure of crack initiation, but the utilization rate of materials strength decreases gradually. Additionally, short-term bursting tests of SCFRTCs electrofusion joints were conducted to determine the bursting pressures of electrofusion joints with varying wall thicknesses. By analyzing the crack morphology on the cross-sections of the bursting joints, it is found that after crack initiation, the crack is driven by internal pressure and gradually propagates until the joint fails. The results of this study can provide reference for the design and application of SCFRTCs electrofusion joints.

Rate-dependent properties of resistance-welded carbon fiber-reinforced polyetheretherketone joints: simulations and experiments

Investigation on Crack Propagation Failure Modes of Short Carbon Fiber Reinforced Polyethylene Electrofusion Joints

Molecular Dynamics Studying on Welding Behavior in Thermosetting Polymers Due to Bond Exchange Reactions

Investigation on Failure Mode of Short Carbon Fiber Reinforced Thermoplastic Composites Joints of Non-metallic Pipeline

Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

Experimental study of the rate-sensitivity of unidirectional-fiber-reinforced metal–matrix composite wires and the establishment of a dynamic constitutive equation

On energy mechanism of rate-dependent failure mode evolution in plain weave composite

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

Tensile impact behaviors and damage mechanism of woven carbon fiber-reinforced-polymer laminates considering adiabatic shear band

A rate-dependent peridynamic model for predicting the dynamic response of particle reinforced metal matrix composites

A numerical model for the thermoplastic welding process

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

Experiment study on the strain rate behavior of carbon/epoxy composite materials

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates

Investigation of strain rate dependent microscopic failure mechanisms in short fiber reinforced plastics using finite element simulations

Dynamic Behavior of A Woven Glass-Fiber-Reinforced Polymer Composite at High Strain Rates and Its Dynamic Constitutive Relationship

Experimental and numerical investigation on temperature field and joint tensile failure for CF/PPS-Al alloy interlocking induction welding

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

Experimental Investigations on the In-Plane Dynamic Compressive Behavior and Upper Limit of Constant Strain Rate for 2D Twill Weave Carbon Fiber Reinforced Composite

Development of A High-Efficiency Modeling Technique for Weld-Bonded Steel Joints in Vehicle Structures, Part Ii: Dynamic Experiments and Simulations