Abstract:In this paper, the thermodynamic model of nitrogen solubility in vanadium nitrogen microalloyed high strength weathering steels of Fe–Cr–Mn–V–N system, according to Hillert’s model for Gibbs energy of its various phases, was established and validated. In the model, the effect of the nitrogen partial pressure on the activity coefficient and the lattice structure characteristics of the vanadium nitrogen precipitated phase were considered. It would be of guiding significance for the design and smelting of Fe–Cr–Mn–V–N system alloys. Based on the established model, the nitrogen contents in δ , γ , α phase and liquid were calculated as a function of the temperature for Fe–Cr–Mn–V–N system alloys. The results show that: first, the maximum solubility of nitrogen in the solidification process is obviously affected by the phase transition when there is a sudden change in the solubility of nitrogen at the phase transition point. The maximum nitrogen solubility of the molten steel in the delta phase region determines whether nitrogen bubbles are formed during the solidification process. The nitrogen solubility is lowest in the solid–liquid region (about 1673 K). Secondly, the increase of Cr and Mn content is beneficial to improve nitrogen solubility in liquid and solid phases. However, the increase of V content mainly affects the nitrogen solubility in the solid phase because the nitrogen in this temperature range is precipitated in the form of vanadium nitride, as the second phase plays a role in strengthening. In addition, the alloying element Mn has a significant effect on nitrogen solubility since the Mn element is the promoting element of austenitic formation. During the solidification process, the delta ferrite region gradually reduces and may disappear with increasing Mn content. Therefore, increasing the Mn content of the alloy system in the design of alloy composition, can reduce the precipitation trend of the nitrogen during the solidification process, which can effectively avoid bubble formation in high nitrogen weathering steels. Lastly, with the increase in the nitrogen partial pressure, the solubility of nitrogen increases during the liquid and solid phases.

Solubility of nitrogen and inclusion characteristics in high aluminium steels

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

Manufacturing high nitrogen austenitic stainless steels by pressurized induction furnace

Theoretical foundation of melting and pressure melting technologies of high nitrogen stainless steels

A Study of the Effect of Alloying Elements and Temperature on Nitrogen Solubility in Industrial Stainless Steelmaking

Precipitation Behaviors of AlN Inclusion in High-Al Steel

Research on Nitrogen Solubility of Fe–Cr–Mn–V–N System Alloys in Liquid and Solid Phases

Thermodynamic Study on the Solubility of N in High Cr, Ni and Mo Content Fe-Cr-Ni-Mo-O Melts

Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement

Synthesis of Aluminium Nitride by Direct Nitridation of Molten Al-Mg-Si Alloys

Factors of Affecting Nitrogen Solubility in Liquid Ferroalloy

Effect of Al Content on the Agglomeration Behavior of Inclusions in High Al Steel

Studies in chemical phase analysis. Part III. Determination of the solubilities of certain elements and compounds pertinent to steels in organic solvent-halogen mixtures with particular emphasis on manganese silicon nitride

Effect of nitrogen content on microstructure, mechanical properties, and corrosion behaviour of coarse-grained heat-affected zone of nitrogen-containing austenitic stainless steel

Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites

Effect of Al Content on Inclusions in Fe‐15Mn‐xAl‐C Low‐Density Steel

Effect of AlN on properties of non-reactive CaO-Al2O3-based mold flux for high-Al steel

Isotope Exchange Measurements of the Interfacial Reaction Rate Constant of Nitrogen on Fe-Mn alloys and an Advanced High-Strength Steel

High-temperature production of AlN in Mg alloys with ammonia gas

Investigation of Nitrogen Containing Austenitic Stainless Steel

Effect of Niobium on Inclusions in Fe-Mn-C-Al Twinning-Induced Plasticity Steel