Abstract:ABSTRACT On 8 January 2022, Menyuan County, China, was struck by an Mw 6.6 earthquake that caused surface rupture in the epicentral area and severe damage to an important railway bridge. The earthquake was recorded by only one strong-motion station, which presents a challenge for quantitatively estimating the extent of the ground-motion distribution caused by this event. In this study, the spectral element method (SPECFEM3D code), which solves the elastodynamic equations and can capture the full physics of seismic-wave propagation, is employed for broadband (0–10 Hz) ground-motion simulations of this earthquake. A hybrid kinematic source is developed in which the final slip distribution combines a prescribed asperity model based on Interferometric Synthetic Aperture Radar data (as a source for low-frequency radiation) and a stochastic part (as a source for high-frequency radiation), which introduces spatial heterogeneities to the prescribed asperity model. The numerical approach is first validated by modeling the well-recorded 1994 Northridge earthquake before modeling the Menyuan earthquake. The simulated ground motion is compared with the only observed strong-motion station record, as well as with empirical Next Generation Attenuation-West2 ground-motion models. Then, topography effect in Menyuan earthquake is studied in detail. The simulated ground motions with and without surface topography indicate that the topography tends to focus and scatter the seismic wavefield, resulting in amplification of the ground shaking. The results show a significant correlation between the peak ground velocity (PGV) and topography. The PGV amplification caused by topography effects is period dependent, and its peak amplification reaches up to 50% within a typical resonance period (1–2 s). It could be inferred that the railway bridge probably vibrated in resonance and suffered severe damage owing to the amplified long-period ground motion caused by the topography.

Simulation of Broadband Ground Motions for the 2016 Mw 6.8 Chauk Earthquake

Ground motion simulation for the 21 May 2021 Ms 6.4 Yangbi, China, earthquake using stochastic finite-fault method

Improvement of Stochastic Green's Function Method for 3D Broadband Ground-Motion Simulation

Ground-motion Simulation Using Stochastic Finite-Fault Method Combined with a Parameter Calibration Process Based on Historical Seismic Data

3D Simulation of Ground Motion for the 2015 Mw 7.8 Gorkha Earthquake, Nepal, Based on the Spectral Element Method

Simulations of Ground Motions for Mw 7.9 Nepal Earthquake

Probabilistic seismic hazard analysis for Bagan (Myanmar)

The 3D Physics-Based Broadband Ground-Motion Simulation, including Topography Effects Causing Damage to Structures, for the 2022 Mw 6.6 Menyuan, China, Earthquake

Estimation of model parameters and simulation of earthquake ground motion by stochastic finite-fault modelling based on a modified slip-related corner frequency

Seismic structure across central Myanmar from joint inversion of receiver functions and Rayleigh wave dispersion

Kinematic rupture modeling of broadband ground motion from the 2022 MS6.9 Menyuan earthquake

New Insights Into Active Faults Revealed by a Deep‐Learning‐Based Earthquake Catalog in Central Myanmar

Simulation of strong ground motions from 2016 Kumamoto (Mw 7.1), Japan, earthquake using modified hybrid technique

Large‐scale ground motion simulation of the 2016 Kumamoto earthquake incorporating soil nonlinearity and topographic effects

Simulation of Ground Motion From Finite‐Fault Modeling Incorporating the Influence of Duration

Depth Varying Rupture Properties During the 2015 Mw 7.8 Gorkha (nepal) Earthquake

Velocity Structure Building and Ground Motion Simulation of the 2014 Ludian Ms 6.5 Earthquake

Three-dimensional Numerical Modeling of Seismic Ground Motion of 2008 Mw6.3 Da-Qaidam Earthquake in Qinghai Province

Simulation of the 2022 Mw 6.6 Luding, China, earthquake by a stochastic finite-fault model with a nonstationary phase

Unveiling the Mechanisms of the 1819 M 7.7 Kachchh Earthquake, India: Integrating Physics‐Based Simulation and Strong Ground Motion Estimates

Seismic structure of the 2015 Mw7.8 Gorkha earthquake revealed by ambient seismic noise and teleseismic surface wave tomography