Abstract:Obtaining a perovskite light-absorbing layer with good crystallization, low defect concentration, good stability, and well-matched energy levels is critical to obtaining high-efficiency perovskite solar cells (PSCs). Here, a hybrid PSC with a graded band gap is explored using MAPbBr3 (MA = CH3NH3) and MAPbBr0.9I2.1 quantum dots (QDs) as component cells. We have creatively designed a solar cell device with a double-QD structure [indium tin oxide (ITO)/SnO2/perovskite:MAPbBr3 QDs/MAPbBr0.9I2.1 QDs/Spiro-OMeTAD/Au]. A better crystal film of the perovskite absorption layer can be obtained because the MAPbBr3 QDs are doped in an antisolvent, which induces nucleation and growth in the polycrystalline perovskite. In addition, we expect that digestive ripening occurred in the crystallization, and the oleic acid ligands on the surface of the QDs disintegrate during the doping process and transfer to the surface of the perovskite absorption layer finally; it follows that the hydrophobicity and stability of the perovskite film are greatly enhanced. Moreover, a thin film of MAPbBr0.9I2.1 QDs is introduced between the perovskite absorption layer and the hole layer, acting as an energy-level ladder, which leads to well-matched energy levels, an increase in fill factor (FF), and an enhanced hole transport capability. In particular, the mechanism of the crystallization process involving the effect of oleic acid ligands on the interior and surface of the perovskite film is fully discussed here. The final research results from the PSCs show that both high efficiency and long-term stability are achieved successfully by this design strategy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14191?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14191</a>.Parameters of carrier lifetimes in TRPL, parameters and calculated values in the Owens two-liquid method experiment, and J–V parameters; QD dispersion images; AFM images; perovskite film images; contact-angle test images; EIS spectrum; and boxplot of J–V parameters (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14191/suppl_file/am0c14191_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

ormation of perovskite by solid-gas reaction through low-temperature carbon counter electrode in hole-conductor-free perovskite solar cells

Contact Engineering and In‐Situ Formation of 2D Perovskite via Solid‐Phase Growth for Efficient Hole‐Transport‐Layer‐Free Perovskite Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

A Highly Stable Hole-Conductor-free CsxMA1-xPbI3 Perovskite Solar Cell Based on Carbon Counter Electrode

Methylamine-Based Method to Deposit MAPbI3 Nanoscale-Thick Films for Efficient Perovskite Solar Cells with Carbon Electrodes

A 2D/3D heterojunction engineering for carbon-based hole-transport-layer-free perovskite solar cells

Modification of Energy Levels by Cetyltrimethylammonium Bromide at the Perovskite/Carbon Interface for Highly Efficient and Stable Perovskite Solar Cells

Efficient Planar Perovskite Solar Cells with Carbon Quantum Dot-Modified spiro-MeOTAD as a Composite Hole Transport Layer

An Excellent Modifier: Carbon Quantum Dots for Highly Efficient Carbon‐Electrode‐Based Methylammonium Lead Iodide Solar Cells

Enhancing the Efficiency of Low-Temperature Planar Perovskite Solar Cells by Modifying the Interface Between Perovskite and Hole Transport Layer with Polymers

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

High‐Efficiency and Stable Perovskite Solar Cells via Buried Interface Modification with Multi‐Functional Phosphorylcholine Chloride

Controllable Cosolvent Blade-Coating Strategy Toward Low-Temperature Fabrication of Perovskite Solar Cells

Efficient Carbon‐based Perovskite Solar Cells Passivated by Alkylammonium Chloride

Optimizing Vertical Crystallization for Efficient Perovskite Solar Cells by Buried Composite Layers

Organic Bromide Salts Interface Modification for High-Efficiency Perovskite Solar Cells with Printed Carbon Electrode

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

The Synergistic Effect of Phosphonic and Carboxyl Acid Groups for Efficient and Stable Perovskite Solar Cells

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

Stable Inverted Planar Perovskite Solar Cells with Low‐Temperature‐Processed Hole‐Transport Bilayer

Vacuum Thermal-Evaporated SnO2 As Uniform Electron Transport Layer and Novel Management of Perovskite Intermediates for Efficient and Stable Planar Perovskite Solar Cells