Abstract:The water-based microemulsion or nanoemulsion of phase change materials, that can be used as the dual functional thermal fluids for energy transport or/and energy storage, have received many attentions due to their practical applications in convective heat transfer improvement and thermal energy storage. This is owing to the advantages of these fluids in providing high effective specific heat resulted from latent heat release/absorption associated with freezing/melting behaviors within the phase change material particles. In general, it is important to evaluate the long-term overall energy efficiency of these fluids, used in thermal systems, under the practical and complex conditions. To address this issue, in the present study, the turbulent forced convective heat transfer of water-based nanoemulsion in a circular tube is experimentally investigated. The n-Eicosane, as a phase change material, with different mass fractions is suspended in the water by an ultrasonic-vibrator-aided emulsion process to prepare the nanoemulsion fluid. The circular tube is under a constant heat flux. The effects of different parameters, such as the Reynolds number, mass fraction of n-Eicosane particles, and heating power, on the dimensionless wall temperature, local convective heat transfer effectiveness, temperature control effectiveness, figure of merit (FOM), and pressure drop are studied. The experimental results reveal that the local convective heat transfer effectiveness decreases as the heating power increases. The use of n–Eicosane particles with smaller value of mass fraction can provide the convective heat transfer effectiveness larger than unity in the entire length of the heating section. The heating power has little effect on the pressure drop ratio. Increasing the heating power leads to a marginal decrease in the pressure drop ratio at larger values of the Reynolds number. The FOM index decreases as the mass fraction of n–Eicosane particles increases. The FOM index is decreased about 10% as the mass fraction of n–Eicosane particles increases in the range of 1% to 5% for the Reynolds number in the range of Re=4548∼4677. This decrease is 10.55% for the Reynolds number in the range of Re=5044∼5195. In addition, the FOM index is reduced with increasing the Reynolds number. The FOM index reduces about 1.3% as the range of Reynolds number increases from 4548∼4677 to 5044∼5195 for ωPCM=5%.

Prandtl and Ohnesorge numbers dependent of ultrasonic horn energy in Newtonian liquid under batch and continuous flow

Impact of Liquid Density and Viscosity on the Performance of A Thermoacoustic Engine with Gas-Liquid Coupling Oscillation

Concentration-dependent electrical and thermal conductivity effects on magnetoHydrodynamic Prandtl nanofluid in a divergent–convergent channel: Drug system applications

Boundary Effects on Flow Oscillations in Transient Heat Transfer of N-Decane at Supercritical Pressure

Understanding the ultrasound field of high viscosity mixtures: Experimental and numerical investigation of a lab scale batch reactor

Modulation of Turbulence Flux Budgets by Varying Fluid Properties in Heated High Prandtl Number Flow

Experimental study on inlet turbulent flow under ultrasonic vibration: Pressure drop and heat transfer enhancement

Numerical simulations of heat generation, thermal radiation and thermal transport in water-based nanoparticles: OHAM study

Exploring the impact of Joule heating and Brownian motion on assisting and opposing flows in Eyring-Prandtl fluid

Efficacy of turbulent convective heat transfer in a circular tube with water-based nanoemulsion of n–Eicosane–An experimental study

Numerical study of MHD flow over stretching cylinder with variable Prandtl number and viscous dissipation in ternary hybrid nanofluids with velocity and thermal slip conditions

Electromechanical, acoustical and thermodynamical characterization of a low-frequency sonotrode-type transducer in a small sonoreactor at different excitation levels and loading conditions

Numerical study on the performance of photovoltaic thermal unit condenser with water/nanofluids as fluids medium

Improving sensible heat storage in a vertical annular pipe subject to variable inlet boundary condition using TiO2/water nanofluid: Numerical study

Peristaltic transport of Prandtl hybrid nanofluid (MWCNTs-SWCNTs/engine oil) in non-uniform ducts: Exploring electro-osmosis and Joule heating effects through Keller box simulations

A numerical simulation validated experimentally for thermally developing convection characteristics of a phase change nanofluid flow in a circular tube

Friction Factor and Nusselt Number for Thermoacoustic Transport Phenomena in A Tube

Heat transfer enhancement using temperature-dependent effective properties of alumina-water nanoliquid with thermo-solutal Marangoni convection: A sensitivity analysis

Importance of design and operating parameters in a sonication system for viscous solutions: effects of input power, horn tip diameter and reactor capacity

A Parametric Study of Prandtl Number Effects on Laminar Natural Convection Heat Transfer from a Horizontal Circular Cylinder to Its Coaxial Triangular Enclosure

Electro-thermo-convection in a high Prandtl number fluid: Flow transition and heat transfer