Abstract:Laser hot wire directed energy deposition (LHW-DED) is a layer-by-layer additive manufacturing technique that permits the fabrication of large-scale Ti-6Al-4V (Ti64) components with a high deposition rate and has gained traction in the aerospace sector in recent years. However, one of the major challenges in LHW-DED Ti64 is heat accumulation, which affects the part quality, microstructure, and properties of as-built specimens. These issues require a comprehensive understanding of the layerwise heat-accumulation-driven process-structure-property relationship in as-deposited samples. In this study, a systematic investigation was performed by fabricating three Ti-6Al-4V single-wall specimens with distinct interlayer delays, i.e., 0, 120, and 300 s. The real-time acquisition of high-fidelity thermal data and high-resolution melt pool images were utilized to demonstrate a direct correlation between layerwise heat accumulation and melt pool dimensions. The results revealed that the maximum heat buildup temperature of the topmost layer decreased from 660 °C to 263 °C with an increase to a 300 s interlayer delay, allowing for better control of the melt pool dimensions, which then resulted in improved part accuracy. Furthermore, the investigation of the location-specific composition, microstructure, and mechanical properties demonstrated that heat buildup resulted in the coarsening of microstructures and, consequently, the reduction of micro-hardness with increasing height. Extending the delay by 120 s resulted in a 5% improvement in the mechanical properties, including an increase in the yield strength from 817 MPa to 859 MPa and the ultimate tensile strength from 914 MPa to 959 MPa. Cooling rates estimated at 900 °C using a one-dimensional thermal model based on a numerical method allowed us to establish the process-structure-property relationship for the wall specimens. The study provides deeper insight into the effect of heat buildup in LHW-DED and serves as a guide for tailoring the properties of as-deposited specimens by regulating interlayer delay.

The effect of multiple thermal cycles on Ti-6Al-4V deposits fabricated by wire-arc directed energy deposition: Microstructure evolution, mechanical properties, and corrosion resistance

Influence of Local Thermal Cycle on the Lattice and Microstructure Evolution of Twin-Wire Directed Energy Deposition-Arc Fabricated Equiatomic NiTi Alloy

Effect of Cycling Heat Treatment on the Microstructure, Phase, and Compression Behaviour of Directed Energy Deposited Ti-Mo Alloys

Modification of Microstructure and Mechanical Properties for Twin-Wire Directed Energy Deposition-Arc Fabricated Ti-48al-2cr-2nb Alloys Via Current Regulation

Evolution of microstructure and mechanical properties in the molten pool of γ-TiAl alloy synthesized in situ by dual-wire-fed electron beam directed energy deposition.

The Effect of Thermal History on Microstructural Evolution, Cold-Work Refinement and α/\b{eta} Growth in Ti-6Al-4V Wire + Arc AM

Microstructure evolution and tensile property of TiAl alloy using continuous direct energy deposition technique

The Effect of Multiple Thermal Process on Microstructural Evolution and Mechanical Properties of Additive Manufactured Al/Steel Structure

Evolution of microstructure and mechanical property of Ti-47Al-2Cr-2Nb intermetallic alloy by laser direct energy deposition: From a single-track, thin-wall to bulk

Effect of in-situ synthesized TiC particles on microstructure and mechanical properties of directed energy deposited AA2219 Al-Cu alloy

Wire-fed electron beam directed energy deposition of Ti–6Al–2Zr–1Mo–1V alloy and the effect of annealing on the microstructure, texture, and anisotropy of tensile properties

Microstructure Modification of Twin-Wire Directed Energy Deposition-Arc Fabricated Γ-Tial Alloy Via Deposition Current Control

Effect of Post-Deposition Heat Treatments on the Microstructure and Tensile Properties of Wire-Fed Electron Beam Directed Energy Deposition GH4169 Ni-based Alloy

The Effect of Interlayer Delay on the Heat Accumulation, Microstructures, and Properties in Laser Hot Wire Directed Energy Deposition of Ti-6Al-4V Single-Wall

Effect of Multiple Thermal Cycles on Metallurgical and Mechanical Properties During Multi-Pass Gas Metal Arc Welding of Al 5083 Alloy

Fatigue Performance of Ti-6Al-4V Processed by Wire-Arc Directed Energy Deposition

Investigation on Heat Treatment Strategy Eliminating Heterogeneity and Anisotropy of TiAl Alloy Fabricated Using Twin-Wire Directed Energy Deposition-Arc

Distinction in electrochemical behaviour of Ti6Al4V alloy produced by direct energy deposition and forging

Deciphering the Microstructural Development and Excellent Ductility in Electron Beam Wire-Fed Additive Manufacturing of Ti-6Al-3Nb-2Zr-1Mo Alloys Based on High Deposition Rate

A comparative study on microstructure and mechanical properties of wire-arc directed energy deposited Al–Zn–Mg–Cu alloy based on the cold metal transfer technology

Thermal-fluid behavior, microstructure and mechanical properties in liquid bridge transfer mode during directed energy deposition-arc additive manufacturing – Insights using NiTi as a model alloy