Abstract:Natural gas with methane as the main constituent is a natural resource that exceeds the reserves of oil in abundance. With inevitable depletion of crude oil, methane will become the major resource for chemicals and liquid fuels in future decades. Extensive efforts have been afforded to both direct and indirect conversion of methane. The direct-conversion approaches involve, for example, the selective oxidation of methane to methanol or formaldehyde, the oxidative coupling of methane (OCM) to C2 species (C2H6 and C2H4) and so on. Since the pioneering work of Keller and Bhasin, much research has been carried out into developing highly efficient catalysts for OCM. Unfortunately, the per pass C2 yields on nearly all reported catalysts are less than 30 %. OCM is believed to occur through a heterogeneous–homogeneous pathway. The mechanism proposes first the catalytic formation of methyl groups on catalyst surface, which desorb as free radicals (CH3·) into the gas phase and ultimately react by predominantly homogeneous pathways. 8] It is generally agreed that some oxygen species O* adsorbed on the catalyst surface are the active oxygen species for the activation of methane to form methyl radicals and play a key role in the selective generation of C2, whereas gaseous oxygen molecules mainly favor the formation of COx. [9–12] By assuming a reaction mechanism via methyl radicals formed by the reaction of methane with surface oxygen species, an upper limit of 28 % for the C2 yield is forecasted for a continuous, CH4/O2 co-fed, single pass process under conventional conditions, such as those used for laboratory screening. The inherent reason for such a limited C2 yield is that the gaseous oxygen—as required oxidant for OCM—can react with the more reactive C2 product to form COx and, thus, a higher C2 selectivity is always compromised with a lower CH4 conversion. [14] To attain a high C2 yield, it is necessary to reduce the nonselective gaseous oxygen concentration. Perovskite oxides with mixed conductivities have been attracting increasing attention due to their potential applications in air separation, as catalysts for selective oxidation, and as reactors for the partial oxidation of hydrocarbons or for other oxygen-involving reactions. Moreover, in the past decade, halide-modified oxides have been widely studied for oxidative dehydrogenation of ethane (ODE) to ethylene and were proven to offer a significant improvement in the performance of the selective oxidation. In this study, a novel chlorinedoped Ba0.5Sr0.5Fe0.2Co0.8O3 d (denoted as BSCFCls) was used as catalyst for the OCM in a fixed-bed reactor. Furthermore, N2O was chosen as the oxygen source because it is a relatively weak oxidant, which is suitable for selective oxidation. Herein, we want to show that (a) the introduction of Cl into Ba0.5Sr0.5Fe0.2Co0.8O3 d enhances the selectivity for the methyl radical formation and (b) N2O as oxidant can effectively reduce gaseous oxygen concentration, since it provides oxygen in the form of surface oxygen species rather than gas-phase oxygen molecules by decomposition on the catalyst surface. Figure 1 shows the concept of OCM on perovskite oxide catalysts using N2O as oxidant.

Controllably Modulating Oxygen Vacancies on Nonstoichiometric Nd‐Ce‐O Binary Oxides for Low‐temperature Oxidative Coupling of Methane

Influence of Ce/Nb Molar Ratios on Oxygen-Rich CexNb1-xO4+δ Materials for Catalytic Combustion of VOCs in the Process of Polyether Polyol Synthesis

Mesoporous MnCeOx Solid Solutions for Low Temperature and Selective Oxidation of Hydrocarbons.

Synthesis and characterization of the flower-like La Ce1−O1.5+ catalyst for low-temperature oxidative coupling of methane

Tailoring La2Ce2O7 catalysts for low temperature oxidative coupling of methane by optimizing the preparation methods

Ce–Fe–Mn Ternary Mixed-Oxide Catalysts for Catalytic Decomposition of Ozone at Ambient Temperatures

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

M (M = Mn, Co, Cu)-CeO2 catalysts to enhance their CO catalytic oxidation at a low temperature: Synergistic effects of the interaction between Ce3+-Mx+-Ce4+ and the oxygen vacancy defects

Synthesis of Nanoparticle Ce–Mg–O Mixed Oxide As Efficient Support for Methane Oxidation

Dissecting La2Ce2O7 catalyst to unravel the origin of the surface active sites devoting to its performance for oxidative coupling of methane (OCM)

Preparation of Ni-Ce-O Mixed Oxide by Oxalate Gel-Coprecipitation Method for Catalytic Combustion of Methane

Facile preparation of hollow MnOx-CeO2 composites with low Ce content and their catalytic performance in NO oxidation

Highly Efficient Ce and Co Codoped OMS-2 Catalyst for NO Oxidation

Oxygen vacancy induced superior catalytic performance in Nd-Ce confined inside carbon nanotubes for N2O-assisted dehydrogenation of ethylbenzene

Homogeneously Co/Ce Co-Doped Amorphous MnOx Microspheres with Abundant Oxygen Vacancy for Catalytic Combustion of Propane

A homogeneous‐heterogeneous kinetic study of oxidative coupling of methane (OCM) on La2O3/CeO2 catalyst

Oxidative Coupling of Methane with High C2 Yield by Using Chlorinated Perovskite Ba0.5Sr0.5Fe0.2Co0.8O3−δ As Catalyst and N2O As Oxidant

Oxygen Vacancy-Dependent Low-Temperature Performance of Ni/CeO2 in CO2 Methanation

In-depth understanding of the crystal-facet effect of La2O2CO3 for low-temperature oxidative coupling of methane

Enhanced activity and stability of La-doped CeO2 monolithic catalysts for lean-oxygen methane combustion

Insight into Ce Doping Induced Oxygen Vacancies over Ce‐Doped Mno 2 Catalysts for Imine Synthesis