Abstract:Under extreme working conditions such as high-speed driving on roads with a large road surface unevenness coefficient, turning on a road with a low road surface adhesion coefficient, and emergency acceleration and braking, a vehicle’s stability deteriorates sharply and reduces ride comfort. There is extensive existing research on vehicle active suspension control, trajectory tracking, and control methods. However, most of these studies focus on conventional operating conditions, while vehicle stability analysis under extreme operating conditions is much less studied. In order to improve the stability of the whole vehicle under extreme operating conditions, this paper investigates the stability of a vehicle under extreme operating conditions based on linear quadratic regulator (LQR) control. First, a seven degrees of freedom (7-DOF) dynamics model of the whole vehicle is established based on the use of electromagnetic active suspension, and then an LQR controller of the electromagnetic active suspension is designed. A joint simulation platform incorporating MATLAB and CarSim was built, and the CarSim model is verified by real vehicle tests. Finally, the stability of the vehicle under four different ultimate operating conditions was analyzed. The simulation results show that the root mean square (RMS) values of body droop acceleration and pitch angle acceleration are improved by 57.48% and 28.81%, respectively, under high-speed driving conditions on Class C roads. Under the double-shift condition with a low adhesion coefficient, the RMS values of body droop acceleration, pitch acceleration, and roll angle acceleration are improved by 58.25%, 55.41%, and 31.39%, respectively. These results indicate that electromagnetic active suspension can significantly improve vehicle stability and reduce driving risk under extreme working conditions when combined with an LQR controller.

LQG Control Design for Vehicle Active Anti-Roll Bar System

Designing LQR Controllers for an Active Anti-roll Bar System with a Flexible Frame Model of a Single Unit Heavy Vehicle

Improving Vehicle Roll Stability by LQR Active Anti-roll Bar Control

Application of an Active Anti-roll bar system for enhancing vehicle ride and handling

Active Optimal Roll Control of Railway Vehicles in Curved Tracks Using an Electrically Actuated Anti-roll Bar System

Nonlinear Control Design of a Half-Car Model Using Feedback Linearization and an LQR Controller

The Design of LQG Controller of Active Suspension

Design and experimental validation of control algorithm for vehicle hydraulic active stabilizer bar system

Double anti-roll bar hardware-in-loop experiment for active anti-roll control system

LQR force command planning–based sliding mode control for active suspension system

Improving Vehicle Rollover Resistance Using Fuzzy PID Controller of Active Anti-Roll Bar System

Vehicle Stability Analysis under Extreme Operating Conditions Based on LQR Control

A lateral and longitudinal control method based on linear quadratic regulator for intelligent vehicles considering future path changes

Tuning Parameters of the Fractional Order PID-LQR Controller for Semi-Active Suspension

H ∞/ LPV controller design for an active anti-roll bar system of heavy vehicles using parameter dependent weighting functions

Vehicle Suspension Control Using LQR Technique

Optimal Control of an Active Suspension System Applying Distributed Parameter Simulation Test

LQR control scheme for active vehicle suspension systems based on modal decomposition

Magnetorheological Semi-Active Anti-Roll Bar for Automobiles

Newly Developed Nonlinear Vehicle Model for an Active Anti-roll Bar System