The Optimization of Aviation Technologies and Design Strategies for a Carbon-Neutral Future

Zheng Xu,Jinze Pei,Yue Song

DOI: https://doi.org/10.3390/sym16091226

2024-09-19

Symmetry

Abstract:This Special Issue systematically reviews and summarizes the latest research into carbon neutrality technology and symmetry principles in power engineering and engineering thermophysics [...]

multidisciplinary sciences

What problem does this paper attempt to address?

System Level Study of Light Sport Aircraft with Conventional and Unconventional Propulsion Systems

Yaolong Liu,Jifa Zhang,Yao Zheng,Tongmin Jiang,Jiechao Zhang

DOI: https://doi.org/10.1007/978-981-16-7423-5_8

2021-01-01

Abstract:Unconventional propulsion systems, such as electric motors, fuel cells with propellers or ducted fans have been considered as significant enablers for reducing aviation carbon emissions. However, the power and energy magnitude required for transport aircraft and other large aircraft are beyond the capability of the state-of-the-art electric propulsion technologies. In this paper, the overall aircraft level study on both conventional and unconventional propulsion systems is carried out. Based on the in-house overall aircraft design framework, multi-disciplinary results of the baseline light sport aircraft are achieved. Through comprehensive sensitivity studies of different propulsion systems, system level comparison results have been obtained. As compared to the worst case, LSA with conventional propulsion systems can achieve more than 30% fuel burn reduction at best flight speed and flight altitude condition. The electric retrofit result has shown that promising fuel burn reduction (carbon emission reduction) can be achieved at the costs of significant flight range decrease, which might give some indications to the selection of propulsion systems for future light sport aircraft development.
Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

Tianhong Jiang,Yaolong Liu,Yao Zheng

DOI: https://doi.org/10.2514/6.2022-3804

2022-01-01

Abstract:Electric propulsion aircraft tends to be a promising way to reach the aviation carbon reduction goals in addition to evolutionary/revolutionary aircraft technologies and operational strategies. In this paper, we perform analysis and optimization studies for hybrid electric propulsion aircraft. To enhance the reliability of the study, verified aircraft disciplinary data are used to build surrogate models for detailed HEP flight mission study. Sensitivity studies on flight altitude, Mach number, hybridization level and battery usage strategy are carried out. Besides, scenario study on electric propulsion technologies is also performed. For overall aircraft performance optimization, the mixed integer non-linear programming (MINLP) approach is applied to include both continuous and discrete design variables which can reflect the real-world air traffic control regulation requirements.
Guest editorial for special issue on control and optimization in renewable energy systems

Dianwei Qian,Chengdong Li,Qinmin Yang,Xiangyang Zhao,Yaobin Chen,Haibo He

DOI: https://doi.org/10.1109/JAS.2017.7510490

2017-01-01

IEEE/CAA Journal of Automatica Sinica

Abstract:The papers in this special section focus on the deployment of control and optimization techniques in renewable energy systems. With the advent of low-carbon economy, there has been a growing interest in harnessing renewable energy resources particularly for electricity generation. Renewable energy resources are advocated for the economic and environmental benefits. The goal of this special issue i...
Combustion Simulation with Particular Reference to Green Aviation

Yao Zheng,Jianfeng Zou,Shuai Zhang

2014-01-01

Abstract:With the fast development of the aviation transportation, the emission (NOx, CO, UHC, CO2, smoke particle and contrails) of the civil aeroengine using the hydrocarbon fuel has damaged the environment tremendously. Especially, the NOx and CO2 have a big contribution to the global warming. In order to greatly reduce the damage of the civil aeroengine to the environment, ACARE (Advisory Council for Aeronautical Research in Europe) has published the 2020 annual target, i.e., the 80 percents reduction of NOx, 50 percents reduction of CO2 per passenger per kilometer, and 20 db reduction of the noise. In order to achieve the ACARE 2020 annual target, one key technology is low emission combustion technology.
Special Issue on “integrated Energy Systems Towards Carbon Neutrality”

Pei Liu,Ming Liu,Xiao Wu

DOI: https://doi.org/10.3390/pr11020439

IF: 3.5

2023-01-01

Processes

Abstract:Energy systems have played an essential role in the history of human civilization [...]
The Architecture Optimization and Energy Management Technology of Aircraft Power Systems: A Review and Future Trends

Tao Lei,Zhihao Min,Qinxiang Gao,Lina Song,Xingyu Zhang,Xiaobin Zhang

DOI: https://doi.org/10.3390/en15114109

IF: 3.2

2022-06-03

Energies

Abstract:With the development of More/All-Electric Aircraft, especially the progress of hybrid electrical propulsion or electrical propulsion aircraft, the problem of optimizing the energy system design and operation of the aircraft must be solved regarding the increasing electrical power demand-limited thermal sink capability. The paper overviews the state of the art in architecture optimization and an energy management system for the aircraft power system. The basic design method for power system architecture optimization in aircraft is reviewed from the multi-energy form in this paper. Renewable energy, such as the photo-voltaic battery and the fuel cell, is integrated into the electrical power system onboard which can also make the problem of optimal energy distribution in the aircraft complex because of the uncertainty and power response speed. The basic idea and research progress for the optimization, evaluation technology, and dynamic management control methods of the aircraft power system are analyzed and presented in this paper. The trend in optimization methods of engineering design for the energy system architecture in aircraft was summarized and derived from the multiple objective optimizations within the constraint conditions, such as weight, reliability, safety, efficiency, and characteristics of renewable energy. The cost function, based on the energy efficiency and power quality, was commented on and discussed according to different power flow relationships in the aircraft. The dynamic control strategies of different microgrid architectures in aircraft are compared with other methods in the review paper. Some integrated energy management optimization strategies or methods for electrical propulsion aircraft and more electric aircraft were reviewed. The mathematical consideration and expression of the energy optimization technologies of aircraft were analyzed and compared with some features and solution methods. The thermal and electric energy coupling relationship research field is discussed with the power quality and stability of the aircraft power system with some reference papers. Finally, the future energy interaction optimization problem between the airport microgrid and electric propulsion aircraft power system was also discussed and predicted in this review paper. Based on the state of the art technology development for EMS and architecture optimization, this paper intends to present the industry's common sense and future trends on aircraft power system electrification and proposes an EMS+TMS+PHM to follow in the electrified aircraft propulsion system architecture selection

energy & fuels
Technologies and perspectives for achieving carbon neutrality

Fang Wang,Jean Damascene Harindintwali,Zhizhang Yuan,Min Wang,Faming Wang,Sheng Li,Zhigang Yin,Lei Huang,Yuhao Fu,Lei Li,Scott X Chang,Linjuan Zhang,Jörg Rinklebe,Zuoqiang Yuan,Qinggong Zhu,Leilei Xiang,Daniel C W Tsang,Liang Xu,Xin Jiang,Jihua Liu,Ning Wei,Matthias Kästner,Yang Zou,Yong Sik Ok,Jianlin Shen,Dailiang Peng,Wei Zhang,Damià Barceló,Yongjin Zhou,Zhaohai Bai,Boqiang Li,Bin Zhang,Ke Wei,Hujun Cao,Zhiliang Tan,Liu-Bin Zhao,Xiao He,Jinxing Zheng,Nanthi Bolan,Xiaohong Liu,Changping Huang,Sabine Dietmann,Ming Luo,Nannan Sun,Jirui Gong,Yulie Gong,Ferdi Brahushi,Tangtang Zhang,Cunde Xiao,Xianfeng Li,Wenfu Chen,Nianzhi Jiao,Johannes Lehmann,Yong-Guan Zhu,Hongguang Jin,Andreas Schäffer,James M Tiedje,Jing M Chen

DOI: https://doi.org/10.1016/j.xinn.2021.100180

2021-10-30

Abstract:Global development has been heavily reliant on the overexploitation of natural resources since the Industrial Revolution. With the extensive use of fossil fuels, deforestation, and other forms of land-use change, anthropogenic activities have contributed to the ever-increasing concentrations of greenhouse gases (GHGs) in the atmosphere, causing global climate change. In response to the worsening global climate change, achieving carbon neutrality by 2050 is the most pressing task on the planet. To this end, it is of utmost importance and a significant challenge to reform the current production systems to reduce GHG emissions and promote the capture of CO2 from the atmosphere. Herein, we review innovative technologies that offer solutions achieving carbon (C) neutrality and sustainable development, including those for renewable energy production, food system transformation, waste valorization, C sink conservation, and C-negative manufacturing. The wealth of knowledge disseminated in this review could inspire the global community and drive the further development of innovative technologies to mitigate climate change and sustainably support human activities.
Exploring Vehicle Level Benefits of Revolutionary Technology Progress Via Aircraft Design and Optimization

Yaolong Liu,Ali Elham,Peter Horst,Martin Hepperle

DOI: https://doi.org/10.3390/en11010166

IF: 3.2

2018-01-01

Energies

Abstract:It is always a strong motivation for aeronautic researchers and engineers to reduce the aircraft emissions or even to achieve emission-free air transport. In this paper, the impacts of different game-changing technologies together on the reduction of aircraft fuel consumption and emissions are studied. In particular, a general tool has been developed for the technology assessment, integration and also for the overall aircraft multidisciplinary design optimization. The validity and robustness of the tool has been verified through comparative and sensitivity studies. The overall aircraft level technology assessment and optimization showed that promising fuel efficiency improvements are possible. Though, additional strategies are required to reach the aviation emission reduction goals for short and medium range configurations.
Combined Design and Open-loop Control Optimization for Propulsion, Power, and Thermal Management of Hybrid-electric Aircraft

H. Pangborn,Oliver V. Atassi,Andrew F. Thompson,Ravi K. Madabhushi,Andrew J. Iezzi

DOI: https://doi.org/10.1109/CCTA54093.2023.10252309

2023-08-16

Abstract:This paper presents a multi-disciplinary optimization framework supporting early-stage design of integrated propulsion, power, and thermal management systems for hybrid-electric aircraft. The framework leverages a graph-based modeling approach rooted in transient conservation of energy that allows multiple energy domains to be compactly coupled, simulated, and optimized simultaneously. Case studies for a series hybrid-electric aircraft architecture demonstrate the benefits of optimizing for transient operation rather than worst-case steady-state behavior, and highlight how the framework can be used to study how the optimal design changes as a function of key specifications, such as electrical component efficiencies and energy densities.

Engineering,Computer Science
Fight for carbon neutrality with state-of-the-art negative carbon emission technologies

Jiaju Fu,Pan Li,Yuan Lin,Huitong Du,Hongzhi Liu,Wenlei Zhu,Hongqiang Ren

DOI: https://doi.org/10.1016/j.eehl.2022.11.005

2022-12-05

Abstract:After the Industrial Revolution, the ever-increasing atmospheric CO2 concentration has resulted in significant problems for human beings. Nearly all countries in the world are actively taking measures to fight for carbon neutrality. In recent years, negative carbon emission technologies have attracted much attention due to their ability to reduce or recycle excess CO2 in the atmosphere. This review summarizes the state-of-the-art negative carbon emission technologies, from the artificial enhancement of natural carbon sink technology to the physical, chemical, or biological methods for carbon capture, as well as CO2 utilization and conversion. Finally, we expound on the challenges and outlook for improving negative carbon emission technology to accelerate the pace of achieving carbon neutrality.
Optimal power system design and energy management for more electric aircrafts

Shuangqi Li,Chenghong Gu,Minghao Xu,Jianwei Li,Pengfei Zhao,Shuang Cheng

DOI: https://doi.org/10.1016/j.jpowsour.2021.230473

IF: 9.2

2021-11-01

Journal of Power Sources

Abstract:Recent developments in fuel cell (FC) and battery energy storage technologies bring a promising perspective for improving the economy and endurance of electric aircraft. However, aircraft power system configuration and power distribution strategies should be reasonably designed to enable this benefit. This paper is the first attempt to investigate the optimal energy storage system sizing and power distribution strategies for electric aircraft with hybrid FC and battery propulsion systems. First, a novel integrated energy management and parameter sizing (IEMPS) framework is established to co-design aircraft hardware and control algorithms. Under the IEMPS framework, a new real-time power distribution algorithm with a flexible ratio is established to facilitate integrated parameter optimization, which can adapt to different power system configurations. Based on the comprehensive analysis of hydrogen economy, FC aging cost, and aircraft stability, a multi-objective parameter optimization model is established to decide the size of aircraft energy storage systems and hyper-parameters in the power controller. The X-57 Maxwell, an experimental electric aircraft designed by NASA, is employed to verify the developed methods. This work provides a novel power system configuration, sizing, and power management method for future commercial aircraft design, and it can further promote the aviation electrification process.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Carbon neutrality pathways exploration-A state-of-the-art study: Key technological advancements, current challenges, and potential opportunities

Hongyu Zhu,Meihui Jiang,Dongdong Zhang,Hui Hwang Goh,Shuyao Wang,Daijiafan Mao,Haisen Zhao,Tianhao Liu,Thomas Wu

DOI: https://doi.org/10.1016/j.seta.2023.103489

IF: 7.632

2023-09-28

Sustainable Energy Technologies and Assessments

Abstract:With the advent of the information age, urbanization has increased the social demand for resources, resulting in an increase in worldwide carbon emissions. In order to reach the zero-carbon objective and develop a society with a shared destiny for humanity, this study examines in depth the path of carbon neutralization in the urban modernization process. The performance characteristics, research status, and application value of low-carbon technologies in various stages from the perspective of diverse interdisciplinary disciplines, including low-carbon transformation of energy structure, energy-conservation and emission-reduction, and benign carbon cycle are examined in detail. The key obstacles to carbon neutralization are then examined from the perspectives of technical limits, environmental pollution, and ecological hazards by combining the qualitative analysis and quantitative analysis. Finally, future options for the establishment of a zero-carbon society are presented from the perspectives of public support, technological innovation, and mass engagement, successfully broadening the scope of carbon reduction. This study seeks to advance social sustainability on two fronts: 1) Energy low-carbon transformation must be performed concurrently with carbon reduction measures; 2) Ecological decarbonization is a prerequisite for the society's natural transition to carbon neutrality.

energy & fuels,green & sustainable science & technology
Optimization Design of SOFC-GT Hybrid Power System for Aviation Application

Zhaoyi Chen,Fengli Liang,Junkui Mao,Zaixing Wang,Xinyong Jiang

DOI: https://doi.org/10.3390/en17153681

IF: 3.2

2024-07-27

Energies

Abstract:Developing high-efficiency and low-carbon propulsion systems is a pressing concern within the aviation field. This paper studies a hybrid power system that combines a solid oxide fuel cell and a gas turbine (SOFC-GT) with propane as fuel, which is easy to store and has a high energy density. The analysis focuses on key parameters such as compressor pressure ratio, fuel utilization rate, and fuel distribution. And a balance between system efficiency and the power-to-weight ratio has been achieved through multi-objective optimization. The conclusions indicate that system efficiency and system weight in the hybrid power system are optimized in opposite directions. Within the design parameters, the hybrid power system's efficiency achieves 0.621, the specific fuel consumption is 115.2 g/kWh, and the power-to-weight ratio is 0.569 kW/kg. Further discussion on the application of this hybrid system in long-endurance unmanned aerial vehicles shows an efficiency of 0.651 during the cruise phase, indicating a promising application prospect of a propane-fueled SOFC-GT hybrid system in the aviation field.

energy & fuels
Optimization and Control of New Power Systems under the Dual Carbon Goals: Key Issues, Advanced Techniques, and Perspectives

Bo Yang,Yulin Li,Wei Yao,Lin Jiang,Chuanke Zhang,Chao Duan,Yaxing Ren

DOI: https://doi.org/10.3390/en16093904

IF: 3.2

2023-05-06

Energies

Abstract:Production and consumption as a result of human demand for energy are increasing with each passing day as populations grow [...]

energy & fuels
International experience of carbon neutrality and prospects of key technologies: Lessons for China

Zheng-Meng Hou,Ying Xiong,Jia-Shun Luo,Yan-Li Fang,Muhammad Haris,Qian-Jun Chen,Ye Yue,Lin Wu,Qi-Chen Wang,Liang-Chao Huang,Yi-Lin Guo,Ya-Chen Xie

DOI: https://doi.org/10.1016/j.petsci.2023.02.018

IF: 4.757

2023-04-01

Petroleum Science

Abstract:Carbon neutrality (or climate neutrality) has been a global consensus, and international experience exchange is essential. Given the differences in the degree of social development, resource endowment and technological level, each country should build a carbon-neutral plan based on its national conditions. Compared with other major developed countries (e.g., Germany, the United States and Japan), China's carbon neutrality has much bigger challenges, including a heavy and time-pressured carbon reduction task and the current energy structure that is over-dependent on fossil fuels. Here we provide a comprehensive review of the status and prospects of the key technologies for low-carbon, near-zero carbon, and negative carbon emissions. Technological innovations associated with coal, oil-gas and hydrogen industries and their future potential in reducing carbon emissions are particularly explained and assessed. Based on integrated analysis of international experience from the world's major developed countries, in-depth knowledge of the current and future technologies, and China's energy and ecological resources potential, five lessons for the implementation of China's carbon neutrality are proposed: (1) transformation of energy production pattern from a coal-dominated pattern to a diversified renewable energy pattern; (2) renewable power-to-X and large-scale underground energy storage; (3) integration of green hydrogen production, storage, transport and utilization; (4) construction of clean energy systems based on smart sector coupling (ENSYSCO); (5) improvement of ecosystem carbon sinks both in nationwide forest land and potential desert in Northwest China. This paper provides an international perspective for a better understanding of the challenges and opportunities of carbon neutrality in China, and can serve as a theoretical foundation for medium-long term carbon neutral policy formulation.

energy & fuels,engineering, petroleum
The Energy Technology Innovation on the Path Towards Carbon Neutrality

Qi Wang,Chongqing Kang

DOI: https://doi.org/10.23919/ien.2023.0004

2023-01-01

iEnergy

Abstract:The Energy Technology Innovation on the Path towards Carbon Neutrality convenes a group of experts, including Nobel laureates, academicians, government officials, and young and middle-aged scholars, to deliberate on the key areas of energy technology innovation on the path towards carbon neutrality. From multiple perspectives and dimensions, the book addresses the challenges that arise in achieving carbon neutrality targets, while exploring the latest developments, ideas, and achievements in cutting-edge technology innovation areas such as zero-carbon transformation of the power system, clean and intelligent transportation, hydrogen energy development and application, and energy digitization. Moreover, it provides valuable insights into the path towards carbon neutrality.
From Material Selection to Structural Topology Optimization: Sustainable Product Design Based on Carbon Footprint Allocation

Lei Zhang,Yu Zheng,Jiale Feng

DOI: https://doi.org/10.1115/1.4065788

2024-07-19

Journal of Mechanical Design

Abstract:Abstract Climate change and the continuous increase of greenhouse gas concentration have a great impact on the human economy and society. Dozens of countries and regions have proposed the climate goal of “zero carbon” or “carbon neutrality.” Therefore, how to make products low carbon has become a trend in product design. This study proposes a low-carbon optimization method based on carbon footprint allocation for products, which can be used to solve the problem of overall product low-carbon optimization and selection of key parts. The first contribution is to build a product carbon footprint analysis model and propose an element-based carbon footprint allocation method. The second contribution is to propose a low-carbon material selection method based on comprehensive carbon emissions, economic cost, and material density and to propose a structural topology optimization method on force condition and carbon emission reduction timeliness. The third contribution is to use force analysis and manufacturing process simulation to ensure the feasibility of the optimization scheme. Finally, a product life cycle carbon emission reduction scheme for high-carbon parts is formed, which takes into account the emission reduction time constraint, comprehensive carbon emissions, economy, mechanical properties, and manufacturability. For illustration, taking a dishwasher product as an example, the results show that the proposed method can effectively identify parts with high-carbon footprint and reduce the carbon footprint.

engineering, mechanical
Topology optimization of hydrogen-powered aviation hybrid systems via thermal management principles

Zengyang Hu,Yimin Xuan

DOI: https://doi.org/10.1016/j.ijhydene.2024.01.281

IF: 7.2

2024-02-02

International Journal of Hydrogen Energy

Abstract:Hydrogen-powered aviation is becoming a promising and competitive aviation power selection for developing zero-emission aerial vehicles. The current options for hydrogen aviation power include hydrogen gas turbines, hydrogen fuel cells, and hydrogen hybrid power. Among them, hybrid power offers a greater competitive advantage as it possesses the advantages of both gas turbines and fuel cells and exhibits higher efficiency levels. Nonetheless, there is still a lack of research on thermal management strategies to improve hydrogen-powered hybrid system efficiency. In this paper, a method that integrates thermal management and topology optimization is proposed to realize the energy-efficient system topology design of the hydrogen-powered hybrid system. Initially, based on the existing topology of the hydrocarbon fuel hybrid system, the overall design of the thermal management architecture of the hydrogen fuel hybrid system is improved, and an integrated calculation method for coupling subsystems such as fuel cells, gas turbines, and component cooling is established. Afterward, a method for optimizing the topology is put forward to improve the flow of mass and energy among components in the hybrid system, and the topology with higher energy efficiency is determined through exergy analysis . Ultimately, through parametric analysis of the optimized hybrid system performance, it is obtained that when the fuel cell fuel utilization rate is 80 %, an energy conversion efficiency of 69 % can be achieved during the cruise phase.

energy & fuels,electrochemistry,chemistry, physical
Wing/Engine Integrated Optimization Based on Navier-Stokes Equations

Yufei Zhang,Haixin Chen,Wensheng Zhang,Song Fu,Miao Zhang,Meihong Zhang,Tiejun Liu

DOI: https://doi.org/10.2514/6.2012-1046

2012-01-01

Abstract:A construction method of aerodynamics optimization system for wing/engine integrated design based on Navier-Stokes equations is proposed in present paper. Four conflicts in the current methodology of optimization system are considered as the main problems for engineering applicability. They are the conflicts between speed and accuracy, human experience and automatization of optimization, component design and full configuration design, local vs. global optimization methods. Sing-point and double-point optimizations of wing/engine integrated design for Chinese large civil aircraft C919 are carried out with the optimization system. A shock-free design is got by single-point optimization, and weak shock design is brought out by double-point optimization. The comparisons of the designs show that, double-point optimization is more engineering applicable.
Sustainable Aviation Electrification: A Comprehensive Review of Electric Propulsion System Architectures, Energy Management, and Control

Jinning Zhang,Ioannis Roumeliotis,Argyrios Zolotas

DOI: https://doi.org/10.3390/su14105880

IF: 3.9

2022-05-13

Sustainability

Abstract:The civil aviation sector plays an increasingly significant role in transportation sustainability in the environmental, economic, and social dimensions. Driven by the concerns of sustainability in the aviation sector, more electrified aircraft propulsion technologies have emerged and form a very promising approach to future sustainable and decarbonized aviation. This review paper aims to provide a comprehensive and broad-scope survey of the recent progress and development trends in sustainable aviation electrification. Firstly, the architectures of electrified aircraft propulsion are presented with a detailed analysis of the benefits, challenges, and studies/applications to date. Then, the challenges and technical barriers of electrified aircraft propulsion control system design are discussed, followed by a summary of the control methods frequently used in aircraft propulsion systems. Next, the mainstream energy management strategies are investigated and further utilized to minimize the block fuel burn, emissions, and economic cost. Finally, an overview of the development trends of aviation electrification is provided.

environmental sciences,environmental studies,green & sustainable science & technology

The Optimization of Aviation Technologies and Design Strategies for a Carbon-Neutral Future

System Level Study of Light Sport Aircraft with Conventional and Unconventional Propulsion Systems

Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

Guest editorial for special issue on control and optimization in renewable energy systems

Combustion Simulation with Particular Reference to Green Aviation

Special Issue on “integrated Energy Systems Towards Carbon Neutrality”

The Architecture Optimization and Energy Management Technology of Aircraft Power Systems: A Review and Future Trends

Technologies and perspectives for achieving carbon neutrality

Exploring Vehicle Level Benefits of Revolutionary Technology Progress Via Aircraft Design and Optimization

Combined Design and Open-loop Control Optimization for Propulsion, Power, and Thermal Management of Hybrid-electric Aircraft

Fight for carbon neutrality with state-of-the-art negative carbon emission technologies

Optimal power system design and energy management for more electric aircrafts

Carbon neutrality pathways exploration-A state-of-the-art study: Key technological advancements, current challenges, and potential opportunities

Optimization Design of SOFC-GT Hybrid Power System for Aviation Application

Optimization and Control of New Power Systems under the Dual Carbon Goals: Key Issues, Advanced Techniques, and Perspectives

International experience of carbon neutrality and prospects of key technologies: Lessons for China

The Energy Technology Innovation on the Path Towards Carbon Neutrality

From Material Selection to Structural Topology Optimization: Sustainable Product Design Based on Carbon Footprint Allocation

Topology optimization of hydrogen-powered aviation hybrid systems via thermal management principles

Wing/Engine Integrated Optimization Based on Navier-Stokes Equations

Sustainable Aviation Electrification: A Comprehensive Review of Electric Propulsion System Architectures, Energy Management, and Control