Abstract:The synthesis of synthetic dyes employed in dye-sensitized solar cells (DSSCs) is often associated with substantial costs and environmental concerns. As a result, there is growing interest in utilizing natural dyes as sensitizers for DSSCs. This paper presents a comprehensive investigation into the extraction of natural dyes from Mediterranean olive leaves using a methanol-based solution, with a particular focus on the impact of different drying times during the dye extraction process on the efficiency of fabricated solar cells. The extracted olive leaf dyes were systematically characterized, encompassing their optical properties analyzed through ultraviolet–visible (UV–Vis) and Fourier Transform Infrared (FTIR) spectroscopy, electrochemical behavior, photovoltaic performance, crystallographic and morphological structures, as well as elemental composition. The research findings unveiled distinctive attributes of the olive leaf dyes, attributable to variations in their charge transfer processes to the band edge of the TiO 2 semiconductor. These outcomes were substantiated through comprehensive analyses involving UV–Vis, FTIR, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Notably, the olive leaf dye subjected to a longer drying time (referred to as OLDS1) exhibited an energy level of the lowest unoccupied molecular orbital (LUMO) closer to that of the conduction band of TiO 2 , facilitating efficient electron transfer. Furthermore, X-ray photoelectron spectroscopy revealed alterations in elemental composition upon dye adsorption onto the TiO 2 surface, with a notable reduction in the intensities of the Ti 2p and O 1 s peaks. The OLDS1 dye demonstrated lower charge transfer resistance and recombination rates compared to the shorter drying time for both fluorine-doped tin oxide (FTO) and indium-doped tin oxide (ITO)-based natural DSSCs (NDSSCs). Importantly, the choice of substrate material, specifically FTO and ITO, significantly influenced the NDSSC performance. The FTO/TiO 2 /OLDS1 configuration exhibited remarkable characteristics, including a high fill factor (FF) of approximately 0.73 and an efficiency of 0.31 %, accompanied by a short-circuit current density of 0.662 mA/cm 2 and an open-circuit voltage of 0.642 V. These results highlight the crucial role of drying time and substrate selection in the fabrication of NDSSCs utilizing Mediterranean olive leaf extracts, with the FTO/TiO 2 /OLDS1 configuration emerging as the most promising and efficient combination.

Fabrication of efficient natural dye-sensitized Solar Cells using Mediterranean olive leaves as natural dye sensitizer

Fabrication and characterization of natural dye-sensitized solar cells using an efficient natural sensitizer derived from Laurus nobilis L

Fabrication and performance analysis of set standard natural dye-sensitized solar cell (N-DSSC) using extracted Terminalia kattapa (Red), Azadirachia indica (Green), and Clitoria ternatea (Blue) dyes with virgin Degussa p25 photo-anode

Natural dyes extracted from Inthanin bok leaves as light-harvesting units for dye-sensitized solar cells

Natural sensitizer extracted from Mussaenda erythrophylla for dye-sensitized solar cell

Utilization of Extracted Natural Dye from Tectona grandis (Teak) as a Sensitizer for Dye-Sensitized Solar Cell

Performance Evaluation of Natural Dye-Sensitized Solar Cells: A Comparison of Density Functional Theory and Experimental Data on Chlorophyll, Anthocyanin, and Cocktail Dyes as Sensitizers

New natural dyes extracted by ultrasonic and soxhlet method: Effect on dye-sensitized solar cell photovoltaic performance

Natural Dye-Sensitized Solar Cells: Fabrication, Characterization, and Challenges

Performance of Natural Dye Extracted from Annatto, Black Plum, Turmeric, Red Spinach, and Cactus as Photosensitizers in TiO2NP/TiNT Composites for Solar Cell Applications

Exploring the potential of natural dyes in DSSCs: Innovations for efficient light harvesting and charge separation through Co-sensitization

Innovating dye-sensitized solar cells through novel microalgal and cyanobacterial species extricated dyes: A sustainable tack for material scarce earth

A Green Approach to Natural Dyes in Dye-Sensitized Solar Cells

An analysis of the dye-sensitized solar cells fabricated with the dyes extracted from the leaves and flowers of Amaranthus cruentus

Rational Design of ZL003-based Organic Dyes for Highly Efficient Dye-Sensitized Solar Cells: Influence of Alkynyl Group and Π-Spacers on Photovoltaic Performance

Facile and Selective Synthesis of Oligothiophene-Based Sensitizer Isomers: an Approach Toward Efficient Dye-Sensitized Solar Cells

Nanoengineering TiO2 for evaluating performance in dye sensitized solar cells with natural dyes

Evaluation of Solar Conversion Efficiency in Dye-sensitized Solar Cells Using Natural Dyes Extracted from Alpinia purpurata and Alstroemeria Flower Petals as Novel Photosensitizers

Improved the DSSCs performance by sensitizing eight natural dyes and varying the annealing process on the TiO2

High Efficiency Dye-Sensitized Solar Cells Based on Natural Dyes

Exploitation of Ionic Liquid Electrolyte for Dye-Sensitized Solar Cells by Molecular Modification of Organic-Dye Sensitizers