Abstract:This paper studies the dynamics of an atomic force microscopy (AFM) cantilever that is considered to be operating under continuous viscoelastic surface contact with material profiles based on the modified nonlocal theory of elasticity. The contact between the cantilever's tip and the sample surface is modeled using a linear stiffness–damper pair and a lumped mass at the beam's free end. The higher-order partial differential equation (PDE) governing the AFM nanocantilever transverse motion and its associated higher-order boundary conditions (BCs) are derived employing extended Hamilton's principle based on the nonlinear nonlocal higher-order constitutive relation in Euler–Bernoulli beam model. The Galerkin's decomposition method is applied to discretize the higher-order PDE and BCs of motion into a set of ordinary differential equations (ODEs) via the mode summation technique using eigenfunctions (mode shapes) of a classic cantilever thin beam. Then, using state-space form of ODEs of motion the frequency analysis is performed based on the eigenvalues of vibration motion. The obtained results are validated with the literature works. The impact of various parameters including nonlocal nanoscale elasticity parameter, added point mass, contact stiffness and viscous damping factors and the specific position where the concentrated mass and the contact stiffness–damper pair are attached to the beam on the resonant frequencies of AFM cantilever is comprehensively investigated. Numerical simulations showed that the resonance frequencies of the AFM cantilever increase by increasing the value of nonlocal nanoscale parameter. Also, it was concluded that an increase in the nonlocal parameter and surface contact stiffness leads the AFM cantilever to be more stiffened. Moreover, it was seen that by increasing the position distance of lumped mass on the beam and contact spring–damper pair from the beam's fixed end, the resonant frequency reduction in the larger values of the surface contact stiffness is more noticeable.

Dynamic Interactions between Oscillating Cantilevers: Nanomechanical Modulation using Surface Forces

Nonlinear dynamics of nanoelectromechanical cantilevers based on nanowire piezoresistive detection

Intermodal coupling spectroscopy of mechanical modes in microcantilevers

Thermal nonlinearities in a nanomechanical oscillator

Magnetomechanical Torques in Small Magnetic Cantilevers

Incongruous Harmonics of Vibrating Solid‐Solid Interface

Non-Contact Mechanical Testing and Characterization of Micro-Scale Structures

Direct observation of coherent energy transfer in nonlinear micro-mechanical oscillators

Coherent phonon-mediated dynamics for an addressable transducer of coupled micro-mechanical resonators

Optomechanical transduction of an integrated silicon cantilever probe using a microdisk resonator

Exploring the static acoustic force sensitivity using AFM micro-cantilever under single- and bimodal-frequency excitation

Kinetic Inductive Electromechanical Transduction for Nanoscale Force Sensing

Characterizing multi-mode nonlinear dynamics of nanomechanical resonators

Nonlinear Dynamics And Chaos Of Microcantilever-Based Tm-Afms With Squeeze Film Damping Effects

Interaction of the fundamental frequencies of a torsional cantilever nanobeam and spring mass system single degree of freedom (SDOF) under axial load, including buckling

Relationship between the non linear dynamic behaviour of an oscillating tip-microlever system and the contrast at the atomic scale

Nonlinear dynamical system of micro-cantilever under combined parametric and forcing excitations in MEMS

Energy Transfer and Motion Synchronization Between Mechanical Oscillators Through Microhydrodynamic Coupling

Flexural resonant frequencies of an AFM cantilever in viscoelastic surface contact mode using modified nonlocal elasticity theory

All-optical dynamic analysis of the photothermal and photoacoustic response of a microcantilever by laser Doppler vibrometry

Surface acoustic wave coupling between micromechanical resonators