Abstract:Abstract The shale oil reservoir in Jimusaer has the characteristics of low porosity and low permeability, resulting in significant resistance in oil flow compared with conventional oil reservoirs. Fracturing is needed to increase shale oil production. Supercritical CO2 (SC-CO2) is an ideal choice for fracturing fluid due to its unique physical and chemical properties. SC-CO2 fracturing is able to make CO2 flow into microfractures and greatly reduce the pumping pressure. New progress has been made in the application of the supercritical CO2 fracturing technology in Jimusaer. A phase control model of SC-CO2 fracturing as a function of temperature and pressure is established, which takes into account the SC-CO2 features, intrinsic energy, flow behavior in fracture and fluid filtration. In this paper, the influences of injection pressure and temperature, injection rate, temperature-pressure field, temperature gradient, and phase behavior are analyzed extensively, in addition, the phase control model and its chart of fracture are presented. The proppant accumulation height reduces by a small amount with the increase of the fracturing fluid injection rate. It is necessary to improve the proppant pumping technology by the sand embankment section and proppant concentration. The liquid transforms into supercritical fluid, when flowing in wellbores and fractures. Different fractures have different phase points, and a lower injection temperature is affected by higher injection rate, lower temperature gradient and closer position from transformation point to the end of fracture. Therefore, in order to achieve a better fracturing effect, the injection temperature, pressure, and rate need to be optimized by surface equipment according to the reservoir conditions, to control the phase behavior of CO2. We built a phase control model for the SC-CO2 fracturing technology, which considers temperature control. We also developed some new techniques to improve SC-CO2 fracturing which is critically needed in the Jimusaer oilfield.

Simulation of boost path and phase control method in supercritical CO 2 pipeline commissioning process

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

A Potentially Non-Contact Monitor Method for CO2 at the Pseudo-Critical Region Using Infrared Spectrometer

Investigation of Dynamic Phase Changes in High-Pressure Pipelines During Flexible CO2 Transport

Simulation study on near-field structure and flow characteristics of high-pressure CO<sub>2</sub> released from the pipeline

Phase state variations for supercritical carbon dioxide drilling

Study of Supercritical State Characteristics of Miscible CO2 Used in the Flooding Process

Numerical simulation of the feasibility of supercritical CO2 storage and enhanced shale gas recovery considering complex fracture networks

Experimental Investigation of the Characteristics of Supercritical CO2 during the Venting Process

The leakage behavior of supercritical CO 2 flow in an experimental pipeline system

Investigation on crack propagation and reasonable wall thickness of supercritical CO 2 pipeline

Simulation of Pipeline Transport of Carbon Dioxide with Impurities

Development of an optimization model for planning carbon dioxide pipeline transportation system and its application

Design of Super Critical CO2 Injection Compressor

Recent Advances in Supercritical CO2 Fracturing: New Theory, New Technology, and Application

Integrated Planning Model for Carbon Capture and Storage Systems Considering CO2 Pipeline Transportation Properties

The Flow and Heat Transfer Characteristics of Supercritical CO2 Leakage from a Pipeline

Preliminarily Design of Supercritical CO2 Compression Test System

Numerical Investigation of the Leakage Flow from a Pressurized CO2 Pipeline

Analysis of Internal Corrosion of Supercritical CO2 Pipeline

Safety Control on the Chocking Process of Supercritical Carbon Dioxide Pipeline