Abstract:Densified wood (DW) is a recently developed material with excellent mechanical properties, considered as an ideal construction material for high-rise timber buildings. However, its flame spread behavior has not been well understood limiting its applications. This work for the first time experimentally and analytically investigates the horizontal flame spread behavior of DW. The influences of material structural characteristics (e.g. density) on heat transfer characteristics are focused. Thermally thin DW with density ranges of 441–1025 kg/m 3 and a constant thickness of 2 mm were tested. The flame spread rate, mass loss rate (MLR) and flame height decreased with the increased wood density. A power-law correlation between the dimensionless MLR and dimensionless density is proposed, which well predicts the experiments with an R 2 of 0.922. The increased wood density decreases flame height and reduces flame radiation. The gas-phase heat transfer shifts from radiation-dominant to convection-dominant. The longitudinal and radial thermal conductivities of DW increased with wood density. Empirical equations are optimized to predict the thermal conductivities of DW with R 2 of 0.870 (longitudinal) and 0.837 (radial). The preheating zone length and the temperature gradient per unit length don't vary significantly with wood density. Their values are averaged to 25.62 mm and 9.312 K/mm respectively. The longitudinal heat conduction is increased with the wood density due to the increased conductivity. However, this conduction increase is lower than the radiation decrease as the wood density increases. Thus, the total heat flux is slightly decreased with the wood density. The gas phase heat transfer dominates the flame spread. However, the longitudinal heat conduction can account for more than half of the gaseous heat transfer, and thus cannot be negligible. Results of this work improve the understanding of DW flame spread, which helps to evaluate the fire behaviors of timber construction.

Flame Retardancy of Densified Wood Modified by Bio-Material Based Flame Retardant

Processing of Pinus Sylvestris L. into a Heat-Insulating, Thermally Stable, and Flame-Retarded Material by Combining the Flame-Retardant Impregnation and Densification Treatment

A flame-retardant densified wood as robust and fire-safe structural material

Combustion Behavior and Thermal Degradation Properties of Wood Impregnated with Intumescent Biomass Flame Retardants: Phytic Acid, Hydrolyzed Collagen, and Glycerol

Pyrolysis and Combustion Behaviors of Densified Wood

Influence of Component Fractions and Structure Characteristic on the Combustion Behavior of Densified Wood

Dense, Self‐Formed Char Layer Enables a Fire‐Retardant Wood Structural Material

Experimental and Numerical Investigation on the Combustion Behavior of Densified Wood: Differences among Wood Species and Impact of Char Oxidation

Development of Biodegradable Flame-Retardant Bamboo Charcoal Composites, Part I: Thermal and Elemental Analyses.

Horizontal flame spread behavior of densified wood: Effect of structural characteristics

Improved Mechanical Properties and Flame Retardancy of Wood/PLA All‐Degradable Biocomposites with Novel Lignin‐Based Flame Retardant and TGIC

Flame Spread Characteristics of Densified Wood with Various Sample Widths and Densities

Novel Amino Glycerin Decorated Ammonium Polyphosphate for the Highly-Efficient Intumescent Flame Retardance of Wood Flour/polypropylene Composite Via Simultaneous Interfacial and Bulk Charring

Highly Flame-Retardant and Low Heat/Smoke-Release Wood Materials: Fabrication and Properties

In-Situ Synthesized Phosphorus–Boron–Magnesium Hybrid Flame Retardants with Core-Shell Structures in Wood Microstructures: an Effective Strategy for Realizing Durable Fire Retardancy, Smoke Suppression, and Anti-Degradation

Effective Phosphorus/Phosphorus-Nitrogen Fire Retardants Applied to Biocomposites Based on Polypropylene-Wood Flour: Flammability, Thermal Behavior, and Mechanical Properties

Flame retardant research on innovative lightweight wood‐plastic composites

Flame-retardant, Heat-Insulating and Char Formation Properties of Densified Pinus Sylvestris Treated with Different Compression Pressures

Thermal and Combustion Properties of Biomass-Based Flame-Retardant Polyurethane Foams Containing P and N

Preparation of Organic-Inorganic Phosphorus-Nitrogen-Based Flame Retardants and Their Application to Plywood

Effect of a biomass based waterborne fire retardant coating on the flame retardancy for wood