Abstract:Energy efficiency enhancement methods have received considerable attention within the industry and scientific community, owing to the rising concern of global energy sustainability. The present article attempts to scrutinize the effects of electrohydrodynamics and nanofluids on the rate of heat transfer and fluid flow in the 3-D chain microchannels. Improved heat exchangers (e.g., chain microchannel) would have a key role in increasing of the performance of such systems since they provide efficient thermal management needed for more robust computational power. To date, analysis of electrohydrodynamics and nanofluids in the chain microchannel was not comprehensively discussed. Here, steady-state, laminar, and three-dimensional chain microchannel are numerically modeled based on a control volume method in Fluent. Results show that by increasing the volume fraction of nanoparticles, the viscosity of the nanofluid increases leading to an increase in pressure drops. Moreover, Nusselt at Re = 125, 250, 500 and 1000 for hybrid nanofluid ( ∅AL2O3=∅CuO=4% ) is 1.206, 1.541, 2.075 and 2.707, respectively which, in turn, depicts surging by 22.94%, 24.17%, 24.70% and 24.707% in comparison to water, respectively. In addition, at low Reynolds number (0.416 ≤Re≤4.166), the lower Reynolds results in decreasing of percentage of pressure drop. Meanwhile, imposing electrohydrodynamic (V = 30 KV) at Re= 125, 250, 500 and 1000 leads to increasing by 23%, 22%, 20% and 18% of Nusselt number in comparison to absence of electric field, respectively. It means that the considered effect of the increasing the Nusselt number at lower Reynolds number is more effective. Moreover, heat transfer rises with augmentation of supplied voltage and Reynolds number. Using active (electrohydrodynamics and hybrid nanofluid) and passive (3-D chain microchannel) methods to enhance heat transfer rate. Adding two additional equations (including ρc and V) in Fluent With Using UDS (User Defined Scalar). Writing UDM to achieve E ( E→=−∇V ) as well as UDF to solve source terms ( ρc. E and J→.E→ ) Considering the charge convection term ( ρcu→ ) in the electric current density ( j→=ρ(ρcβE→+ρcu→+De∇ρc)) owing to used fluids (water and nanofluids) in this article, whilst it is negligible for air. Investigation of effects of different types of nanofluid and their concentration as well as impacts of adding electrode and its voltages. Imposing electrohydrodynamic (V = 30 KV) at Re= 125, 250, 500 and 1000 leads to increasing by 23%, 22%, 20% and 18% of Nusselt number in comparison to absence of electric field, respectively.

Numerical investigation of the magneto-hydraulic-thermal performance of a nanofluid in a semi-porous wavy channel

Data analysis of thermal performance and irreversibility of convective flow in porous-wavy channel having triangular obstacle under magnetic field effect

Numerical Study of Heat Transfer Enhancement by Applying Magnetic Field on Nanofluid Flowing in Porous Medium

The influence of magneto-hydrodynamics and vortex generators on nanofluids heat transfer

Investigation of nanofluid flow in the channel under effect of magnetic field and joule heating

Numerical simulation of the magnetic field and Joule heating effects on force convection flow through parallel-plate microchannel in the presence of viscous dissipation effect

Numerical Simulation and Neural Network Model for Hydromagnetic Nanofluid Convection in a Porous Wavy Channel with Thermal Non-Equilibrium Model

Investigation of Nanofluid Heat Transfer in a Microchannel Under Magnetic Field Via Lattice Boltzmann Method: Effects of Surface Hydrophobicity, Viscous Dissipation, and Joule Heating

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Thermal study of Darcy–Forchheimer hybrid nanofluid flow inside a permeable channel by VIM: features of heating source and magnetic field

Investigation of heat transfer enhancement using ferro-nanofluids (Fe3O4/water) in a heated pipe under the application of magnetic field

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

An investigation into a semi-porous channel's forced convection of nano fluid in the presence of a magnetic field as a result of heat radiation

Numerical Analysis of the Magnetic Field Impact on Hydrothermal Characteristics of a Microchannel Heatsink with Fe3O4 Ferrofluid and Various Pin-Fin Shapes

Thermal Analysis of MHD‐Modified Hybrid Nanofluid Flow Inside Convergent/Divergent Channel With Heat Generation/Absorption and Viscous‐Ohmic Dissipation

Magnetohydrodynamic flow of nanofluid through backward-facing step micro- and mini-channels: A comparative analysis of single-phase and two-phase approaches

Three-dimensional numerical investigation of hybrid nanofluids in chain microchannel under electrohydrodynamic actuator

Exploring the thermal efficiency of Fe3O4–H2O flow in a microchannel under the effects of a magnetic field

Numerical Investigation of Heat Transfer Enhancement on Tangent Hyperbolic Fluid over a Stretching Sheet with an Inclined Magnetic Field Filled with Hybrid Nanofluids

Numerical Analysis of Natural Convection in an Annular Cavity Filled with Hybrid Nanofluids under Magnetic Field