Abstract:Nowadays, sodium ion batteries (SIBs), one of the realistic promising alternatives to the lithium ion batteries (LIBs), have drawn increasing attention because of the high availability, the low cost and the intercalation chemical similarity of sodium compared with lithium. However, many active materials in application of LIBs are invalid for SIBs as far as the different ionic radium (Na+ ,1.06 Å vs. Li+ ,0.76 Å). Thus, much effort has been taken to explore suitable host material to allow reversible and rapid sodium ion insertion or extraction, especially for advanced anode materials. Fortunately, the transition metal dichalcogenides (TMDs) with the formula MoX2 (S or Se) and graphene-like structure are widely studied as anode materials for SIBs due to the unique two-dimensional layered structure and high specific capacity. Nevertheless, the practical application of the graphene-like TMDs is impeded by its inherent limitations. First, layered TMDs nanosheets are so easy to restack with the van der Waals interaction, resulting into the decrease of accessible active sites for sodium ions. Second, compared with carbon-based materials, especially, graphene or carbon nanotubes, the TMDs have lower electrical conductivity, which is not favor electrode reactions. Third, the volume change and structural variation during discharge-charge process cause the pulverization and loose contact of the active materials, resulting rapid capacity fading. Fourth, the TMDs-based anodes face the dissolution issue of polysulfides or polyselenides, resulting in fast capacity fading and low Coulombic efficiency during the discharger-charge process. To combat the aforementioned problems, in this present work, we have made double modifications on the MoX2 by introducing the vertical aligned graphene (VG) as support backbone and nitrogen-doped carbon (N-C) coating as outer protective layer via a simple two-step process. The curved MoX2 nanoflakes are controlled deposited on the VG skeleton, which the cloth fabric server as current collector, via a facile hydrothermal method; subsequently, the N-C layer uniformly coats on the MoX2 nanoflakes by self-polymerizing dopamine followed by a post carbonization process. These samples are directly assembled into SIBs without any binders or conductive materials, and exhibit excellent electrochemical performance for SIBs. For example, our synthesized VG/MoSe2/N-C ternary composite exhibits superior storage sodium performance, with high capacity (540 mAh g-1), enhanced high rate capability and long-term cycling stability (298 mAh g-1 at 2.0 A g-1 after 1000 cycles). These designed ternary sandwich VG/MoX2/N-C ternary sandwichhierarchical structures, which provide a flexible vertical aligned graphene to accommodate volume changes, introduces large efficient active areas, good conductivity, and omnibearing paths for sodium ion and electrons, contributes to their superior performances and enables its application in energy storage.

Controllable Synthesis of Novel Orderly Layered VMoS 2 Anode Materials with Super Electrochemical Performance for Sodium-Ion Batteries

Rational Design of Moo2−Based Electrodes by Crystal Surface Engineering Control for Ultra-Long Life Sodium Ion Batteries

Ultrahigh initial coulombic efficiency for deep sodium storage enabled by carbon-free vanadium-doping MoS 2 hierarchical nanostructure

Architecting Amorphous Vanadium Oxide/MXene Nanohybrid via Tunable Anodic Oxidation for High‐Performance Sodium‐Ion Batteries

A flower‐like VO2(B)/V2CTx heterojunction as high kinetic rechargeable anode for sodium‐ion batteries

Synergistic engineering of amorphous network and oxygen vacancies in vanadium oxides for enhanced sodium-ion storage

Organic Species-Intercalated Vanadium Oxide for Sodium-Ion Battery: Mixed-Anion Coordination Effect, Enhanced d - p Orbital Hybridization, and Topotactic Phase Conversion Induced by N-Substitution

Pseudo-isotopic substituted (Co0.5Ni0.5)S2 anchoring on V4C3T MXene as an efficient anode for full sodium-ions batteries

Vertical Aligned Graphene/Metal Sulfides/N-Doped Carbon Ternary Sandwich Hierarchical Structure for Sodium Storage

Fe 2 VO 4 Nanoparticles Anchored on Ordered Mesoporous Carbon with Pseudocapacitive Behaviors for Efficient Sodium Storage

High performance anode for sodium-ion batteries: Calcium pre-intercalated layered vanadium oxide/carbon composite

Interlayer-Expanded MoS 2 Nanoflowers Vertically Aligned on MXene@Dual-Phased TiO 2 as High-Performance Anode for Sodium-Ion Batteries

High Performance Sodium-Ion Full Battery Based on One-Dimensional Nanostructures: the Case of Na0.44MnO2 Cathode and MoS2 Anode

A Fully Sodiated NaVOPO4 with Layered Structure for High-Voltage and Long-Lifespan Sodium-Ion Batteries

Na 0.91 MnO 2 with an Extended Layer Structure and Excellent Pseudocapacitive Behavior as a Cathode Material for Sodium-Ion Batteries

Enhancing Sodium-Ion Transport by Hollow Nanotube Structure Design of a V5S8@C Anode for Sodium-Ion Batteries

High-Entropy Layered Oxide Cathode Materials with Moderated Interlayer Spacing and Enhanced Kinetics for Sodium-Ion Batteries

Spinel-Layered Intergrowth Composite Cathodes for Sodium-Ion Batteries

Cation-Disordered O3-Na 0.8 Ni 0.6 Sb 0.4 O 2 Cathode for High-Voltage Sodium-Ion Batteries

Hierarchical 1 T-MoS2/MoOx@NC microspheres as advanced anode materials for potassium/sodium-ion batteries

Layered Oxide Material as a Highly Stable Na‐ion Source and Sink for Investigation of Sodium‐ion Battery Materials