Abstract:Photoelectrochemical water splitting (PEC) is a viable solution for addressing future environmental and energy concerns. However, due to the high cost of photoelectrodes and the limitations of sluggish kinetics, practical applications are limited. To achieve that goal, effective solutions are still needed to create low-cost photoelectrodes suited for PEC. Transistion metal sulfides (TMS) materials have a high potential for use as photoelectrodes due to their favorable and impressive properties 1 . The photoactivity of TMS is typically unlimited due to low reflection at the grain boundary. The individual atomic thin sheets with higher surface area compared to bulk materials allow for faster diffusion of photoinduced charge carriers primarily due to the less interface between their grains. Their lower interfacial contact resistance enables enhanced charge dynamics and, as a result, improved electrochemical reaction kinetics. When compared to other TMS, CdS has a direct bandgap and excellent photoactivity. However, its toxicity and photocorrosion make it unsuitable for long-term practical use. WS 2 is well-known layered transition metal sulfide that has a 2D molybdenite structure. It is non-toxic in acidic/neutral solutions that are chemically stable. It has been demonstrated to be more stable against oxidation and photo corrosion than CdS, which is extensively employed in photocatalysis 2 . However, because of the recombination of photoinduced charge carriers, pure WS 2 exhibits relatively poor photocatalytic efficiency and stability. As a result, combining WS 2 based photoactive nanomaterials with other suitable materials has helped overcome this challenge. Transistion metal sulfides with acceptable band structures for heterostructure construction with WS 2 may enable breakthroughs in photocatalytic and photo-electrochemical processes. The primary focus of this work is to construct heterostructures by combining CdS and WS 2 and to investigate their role as photoanodes of semiconductor materials in PEC water splitting. In this work, we have synthesised heterostructures using a facile solution-reaction method and Successive Ionic Layer Adsorption Reaction deposition (SILAR) technique which is intrinsically cost effective and scalable 3 . The heterostructure is characterised by XRD, SEM and TEM. We also studied the performance enhancement of this heterostructure using Linear sweep voltammetry and Electrochemical impedance spectroscopy. Pristine WS 2 and CdS showed photocurrent densities of 3 μA cm -2 and 20 μA cm -2 . However, heterostructures formation led to much improved photocurrents. Photocurrent densities of 151 μA cm -2 were observed for WS 2 /CdS heterostructures respectively at 1.23 V vs RHE. The enhanced improvement in photoelectrochemical performance in the case of the heterostructures could be due to the following factors: (a) the intimate interaction of this unique heterostructure improves adhesion and lowers the photoinduced charge transfer barrier; (b) increased light harvesting capability; and (c) improved charge dynamics of photoinduced charge carriers due to proper band alignment. The current study paves the way for further research into the creation of metal sulfide heterostructures that generate analogous photoelectrode materials. Keywords: Photoelectrochemical water splitting, metal sulfides, photoelectrodes. Figure 1

Type-II CdS/PtSSe heterostructures used as highly efficient water-splitting photocatalysts

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

Two-dimensional CdO/PtSSe Heterojunctions Used for Z-scheme Photocatalytic Water-Splitting

2D/2D Janus BiTeCl/GeSe vdW heterostructure as a robust high-performance S-scheme photocatalyst for water splitting

Double S-scheme Cu2-xSe/twinned-Cd0.5Zn0.5S homo-heterojunctions with surface plasmon effects for efficient photocatalytic H2 evolution

Construction of CdS/SnSSe heterostructures for direct Z-scheme photocatalysis: a first-principles computational study

SnC/PtS 2 heterostructure: A promising direct Z-scheme photocatalyst with tunable electronic optical properties and high solar-to-hydrogen efficiency

Overall water splitting of type-I vdW heterojunction ZnS/Ga 2 SSe

CdS-based Schottky junctions for efficient visible light photocatalytic hydrogen evolution

Two-dimensional CdS/SnS 2 heterostructure: a highly efficient direct Z-scheme water splitting photocatalyst

Two-dimensional Cs3Sb2I9/C2N van der Waals type-II heterostructure: a promising photocatalyst for high efficiency water splitting

2D materials and heterostructures for photocatalytic water-splitting: a theoretical perspective

Two-Dimensional ZnS/SnS2 Heterojunction as a Direct Z-Scheme Photocatalyst for Overall Water Splitting: A DFT Study

h2D-C 2 N/C 3 B Two-Dimensional Heterostructures: A Direct Z-Scheme Photocatalyst for Overall Water Splitting

PtS2/g-C3N4 van der Waals heterostructure: A direct Z-scheme photocatalyst with high optical absorption, solar-to-hydrogen efficiency and catalytic activity

Enhanced Photoelectrochemical Performance in Engineered Interface 2D Metal Sulfide Heterostructures for Water Splitting

Two-Dimensional Polarized Blue P/SiS Heterostructures as Promising Photocatalysts for Water Splitting

MoSSe/Hf(Zr)S2heterostructures used for efficient Z-scheme photocatalytic water-splitting

Simultaneously Efficient Solar Light Harvesting and Charge Transfer of Hollow Octahedral Cu 2 S/CdS P–n Heterostructures for Remarkable Photocatalytic Hydrogen Generation

Ferroelectric polarization promotes a CdS/In2Se3 heterostructure for photocatalytic water splitting

Two-dimensional C3N/WS2 vdW heterojunction for direct Z-scheme photocatalytic overall water splitting