Abstract:Large-scale distributed thermal storage requires high-energy-density and low-cost thermal storage materials. Here, a concocted composite composed of Al2(SO4)3·18H2O and FeSO4·7H2O salts, as well as carbon nanotubes (CNTs) as a thermal conductive agent has been proposed for the applications of large-scale distributed thermal storage. The composite was physically mixed but displayed enhanced structural stability due to the use of carbon nanotubes that formed networks in the composite. The use of CNTs could restrain the volume change of the salt mixture in thermal charge/discharge. The detailed thermophysical properties and thermal energy storage performance were studied, including latent heat, thermal conductivity, and thermal cycling stability. A differential scanning calorimeter (DSC) revealed that the largely endothermic temperature and absorbed heat of the composite were 118.43 °C and 422.40 J g–1, and it also delivered a high stability of ca. almost no capacity fading in exampled 100 cycles. The introduction of the carbon nanotube creates thermal conductivity networks in the composite, endowing the composite material with enhanced thermal conductivities. This can provide rapid thermal storage while retaining the storage density. This study can give insights into the rational design of salt hydrates for thermal storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00199?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00199</a>.DSC curves and the corresponding thermal energy of pure Al2(SO4)3·18H2O and FeSO4·7H2O and the composites composed of Al2(SO4)3·18H2O and FeSO4·7H2O at various ratios; XRD patterns and the FT-IR spectrum of pure Al2(SO4)3·18H2O and FeSO4·7H2O compared with the obtained Al2(SO4)3·18H2O–FeSO4·7H2O–CNT composite; and thermophysical properties of the Al2(SO4)3·18H2O–FeSO4·7H2O composite at various ratios measured at 5 °C min–1 (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00199/suppl_file/ae1c00199_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effects of porous carbon materials on heat storage performance of CaCl 2 hydrate for low-grade thermal energy

Multi-form heat storage performance of expanded graphite based CaCl2 composites for low-grade heat source

Development of Activated Carbon/cacl2 Composites for Seasonal Thermochemical Energy Storage: Effect of Pore Structure

Granular porous calcium carbonate particles for scalable and high-performance solar-driven thermochemical heat storage

Carbon Foam/CaCl 2 ·6H 2 O Composite as a Phase-Change Material for Thermal Energy Storage

High thermal conductivity and low leakage phase change materials filled with three-dimensional carbon fiber network

Development of dense Ca-based, Al-stabilized composites with high volumetric energy density for thermochemical energy storage of concentrated solar power

Preparation and properties of CaCl2·6H2O/silica aerogel composite phase change material for building energy conservation

Development of lithium hydroxide-metal organic framework-derived porous carbon composite materials for efficient low temperature thermal energy storage

The effect of 3D carbon nanoadditives on lithium hydroxide monohydrate based composite materials for highly efficient low temperature thermochemical heat storage

Novel Low-Cost Anorthite Porous Ceramic-Based Binary Chlorate High-Temperature Thermal Energy Storage Material: Preparation and Characterization

Experimental study on the performance of a novel composite phase change energy storage material for clean heating

A Eutectic Mixture of Calcium Chloride Hexahydrate and Bischofite with Promising Performance for Thermochemical Energy Storage

Construction of biomass waste derived hierarchical porous biochar framework based lithium hydroxide composites for highly efficient and durable low temperature thermochemical heat storage

Development and Characteristics Analysis of Novel Hydrated Salt Composite Adsorbents for Thermochemical Energy Storage

Simultaneous impregnation and microencapsulation of CaCl2 using silica gel and methyl cellulose for thermal energy storage applications

Performance investigation of LiCl·H 2 O-γ-Al 2 O 3 composite materials for low-grade heat storage

CaO/CaCO3 thermochemical heat storage performance of CaO-based micrometre-sized tubular composite

Composite MWCNT/ MIL-101 (Cr)/CaCl2 as High-Capacity Water Adsorbent for Long-Term Thermal Energy Storage

Facile Preparation of Binary Salt Hydrates/Carbon Nanotube Composite for Thermal Storage Materials with Enhanced Structural Stability

New hybrid graphene/inorganic salt composites for thermochemical energy storage: Synthesis, cyclability investigation and heat exchanger metal corrosion protection performance