Abstract:Conventional mechanical recycling of waste plastics is limited in its scale and ability to deliver quality materials to reproduce plastic products like tyres. While plastic waste is often combusted as fuel for energy production, other thermochemical processes such as gasification, combined with methanol synthesis, and methanol to olefins (MTO) or methanol-to-aromatics (MTA) technologies, may offer a better solution to reproduce plastic products from olefin and aromatic chemicals. To explore these possibilities, this study focused on ascertaining the economic feasibility and carbon footprint of a refinery's large scale conversion of waste plastic methanol (MeOH) into ethylene (ET) via MTO, its capture and conversion of on-site CO 2 emissions for the production of benzene (plan A), the outsourcing of bio-benzene produced via the wood methanol-to-aromatics (MTA) process (plan B), and the conversion of benzene and ET into styrene-butadiene rubber (SBR). The material and energy inputs and outputs for these chemicals processes, were simulated in the bio-chemical engineering software SuperPro Designer (SPD). A Microsoft Excel Green SBR Refinery (MSE-Ref._Green-SBR) template tool file was designed and uploaded with the simulation's process flows, financial data, and global warming potential (GWP) factors in kg CO 2 eq. to complete the pre-scripted formulas for techno-economic analysis (TEA) and life cycle analysis (LCA). The results concluded that the SBR refinery could achieve maximum profitability if it allocates roughly 25.0 % of its plastic MeOH for SBR production, with the remainder sold as ET on the market, and converts a maximum of 25.0 % of its CO 2 emissions for SBR production. However, profitability depends on a financial grant covering at least 60.0 % of the total fixed capital investment (TFCI) cost. Switching to plan B reduced the grant needed by 30.0 %. The SBR products in both plan A and plan B had a lower CO 2 eq. footprint compared to other examples sampled, with the SBR product in plan A offering a slightly better carbon neutrality at 0.38 kg CO 2 eq./kg SBR , than plan B at 0.39 kg CO 2 eq./kg SBR . While the waste plastic MeOH feedstock accounted for the highest operational cost and most of the plant's carbon emissions (41.1 %), with future technical developments the cost and carbon footprint of upcycling plastic MeOH into SBR could be improved, or with bio-MeOH. By granting the public free access to the resources, data, and tools (e.g., MSE-Ref._Green-SBR file) utilised, this study's objective is to provide a template and methodology for the reader to modify or update the data, assumptions, and calculations it contains for their own academic or professional purposes. Thereby helping promote research and development in plastic waste and CO 2 upcycling.

Toward the reuse of styrene–butadiene (SBRr) waste from the shoes industry: production and compatibilization of BioPE/SBRr blends

Recycled Polypropylene/SEBS Polyblends: Manufacture and Mechanical Property Evaluation

From Waste to Styrene–Butadiene (SBR) Reuse: Developing PP/SBR/SEP Mixtures with Carbon Nanotubes for Antistatic Application

Toward the production of bioblends for the automotive sector: Reuse of recycled polyamide 6,6 to prepare super‐tough biopolyethylene

Compatibilizing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high impact polystyrene blends via styrene-butadiene-glycidyl methacrylate terpolymer

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Sustainable Composites: Analysis of Filler–Rubber Interaction in Natural Rubber–Styrene–Butadiene Rubber/Polyurethane Composites Using the Lorenz–Park Method and Scanning Electron Microscopy

Compatibilized PC/ABS blends from solvent recycled PC and ABS polymers from electronic equipment waste

Metathesis of butadiene rubber for the sustainable production of polyesters and polyols

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties

Electric and electronic equipment waste: reuse in elastomeric composites

An effective sustainable approach towards recycling and value addition of waste poly(vinyl chloride) and acrylonitrile butadiene styrene (ABS) recovered from electronic waste (e-waste)

Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition

High-strength and super-tough PA6/PS/PP/SEBS quaternary blends compatibilized by using a highly effective multi-phase compatibilizer: Toward efficient recycling of waste plastics

Detailed comparison of compatibilizers MAPE and SEBS-g-MA on the mechanical/thermal properties, and morphology in ternary blend of recycled PET/HDPE/MAPE and recycled PET/HDPE/SEBS-g-MA

Polymeric Biocomposite Based on Thermoplastic Polyurethane (TPU) and Protein and Elastomeric Waste Mixture

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Toward Producing Biopolyethylene/Babassu Fiber Biocomposites with Improved Mechanical and Thermomechanical Properties

Evaluating the profitability and global warming potential of manufacturing styrene-butadiene rubber with chemicals synthesised from bulk waste plastic and CO 2 emissions

Fabrication of biopolyethylene-based biocomposites with coffee ground waste: Effect of polyethylene-graft-maleic anhydride

Improving the mechanical and abrasion properties of silica-reinforced styrene-butadiene rubber composites by optimizing the concentrations of compatibilizers