Universal Strategy to Prepare a Flexible Photothermal Absorber Based on Hierarchical Fe-MOF-74 toward Highly Efficient Solar Interfacial Seawater Desalination
Jiulong Wang,Weike Wang,Jianguo Li,Xueyang Mu,Xinyue Yan,Zerui Wang,Jinbu Su,Tao Lei,Chengbing Wang
DOI: https://doi.org/10.1021/acsami.1c11176
2021-09-16
Abstract:Solar-driven interfacial steam generation (SDISG), as an emerging green and renewable approach to overcome water shortage, is very suitable for remote locations, developing countries, and disaster zones because it does not require an additional energy supply. However, the traditional metal-based and carbon-based absorbers always suffered from fragility (or rigidity) and the complex preparation process, which dramatically inhibited their transportation and installation in areas with poor infrastructure. Therefore, there is an urgent need to develop a universal method to fabricate flexible solar evaporators. Herein, a novel solar evaporator that integrates a flexible matrix (Cu mesh or textile) and a hierarchical Fe-MOF-74 photothermal absorber component is perfectly prepared for the rapid and efficient SDISG. Notably, the results show that Fe-MOF-74-based flexible textile matrix composites exhibit outstanding light absorption (83.81%), low thermal conductivity (0.1730 W/m K), super hydrophilic properties (within 50 ms, the contact angle is close to 0°), excellent salt resistance, high evaporation rate (1.35 kg/m2 h), and photothermal conversion efficiency (η is 81.5% under one sun, stable for 30 days). Owing to the flexibility, recyclability, and above-mentioned excellent performance, the prepared hierarchical Fe-MOF-74-based flexible composite systems are more practical for transportation, large-scale production, and stable and efficient applications. As a result, this work offers new insight into the future development of the combination of a MOF-based photothermal absorber and flexible substrates, as well as for the application of interfacial solar seawater desalination, and provides a new reference for other applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11176.Digital photographs of the prepared Fe-MOF-74/Cu mesh and textile; light reflection and transmission spectra of Fe-MOF-74/Cu mesh and textile and Cu(OH)2 nanowires; the surface temperature of Fe-MOF-74/Cu textile varies with time during the evaporation process; optical images of the accumulation of concentrated salt on the sample surface after the evaporation system containing the Fe-MOF-74/Cu mesh; evaporation performance of the Fe-MOF-74/Cu mesh in 3.5 wt % brine under 1 sun; time-dependent evaporation rate change of the Fe-MOF-74/Cu mesh and stability test under 1 sun illumination; the flexibility of the Fe-MOF-74/Cu mesh and textile; optical images of the freshwater collection process of the Fe-MOF-74/Cu mesh and textile; the desalination capacity of the Fe-MOF-74/Cu mesh (ions concentrations variation); model diagram for calculating energy balance; and water wettability comparison; comparison of evaporation performance and economic benefits between the Fe-MOF-74/Cu mesh and textile and other flexible materials (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology