Abstract:Molecular dynamics (MD) simulations are performed to investigate the thermal and mass accommodation coefficients (TAC and MAC, respectively) for the combination of iron(-oxide) and air. The obtained values of TAC and MAC are then used in a point-particle Knudsen model to investigate the effect of chemisorption and the Knudsen transition regime on the combustion behavior of (fine) iron particles. The thermal accommodation for the interactions of Fe with N2 and FexOy with O2 is investigated for different surface temperatures, while the mass accommodation coefficient for iron(-oxide) with oxygen is investigated for different initial oxidation stages ZO , which represents the molar ratio of O/(O+Fe) , and different surface temperatures. The MAC decreases fast from unity to 0.03 as ZO increases from 0 to 0.5 and then diminishes as ZO further increases to 0.57. By incorporating the MD-informed accommodation coefficients into the single iron particle combustion model, the oxidation beyond ZO=0.5 (from stoichiometric FeO to Fe3O4 ) is modeled. A new temperature evolution for single iron particles is observed compared to results obtained with previously developed continuum models. Specifically, results of the present simulations show that the oxidation process continues after the particle reaching the peak temperature, while previous models predicting that the maximum temperature was attained when the particle is oxidized to ZO=0.5 . Since the rate of oxidation slows down as the MAC decreases with an increasing oxidation stage, the rate of heat loss exceeds the rate of heat release upon reaching the maximum temperature, while the particle is not yet oxidized to ZO=0.5 . Finally, the effect of transition-regime heat and mass transfer on the combustion behavior of fine iron particles is investigated and discussed.

Molecular dynamics simulations of the initial oxidation process on ferritic Fe–Cr alloy surfaces

Molecular dynamics simulations of interaction and very first step oxidation in the surface of ferritic Fe-Cr alloy

The Oxidation of Fe/Ni Alloy Surface with Supercritical Water: A ReaxFF Molecular Dynamics Simulation

Reactive molecular dynamics simulations of the initial oxidation and passivation of Fe-Cr alloy steel

Molecular Dynamics Study on the Initial Oxidation Behavior of FeCr Alloys in Supercritical H2O and Supercritical CO2 with O2

Reactive molecular dynamics study of the oxidation behavior of iron‐based alloy in supercritical water

The Role of Cr Atom in the Early Steam Oxidation of Fe‐based Alloys: an Atomistic Simulation

A ReaxFF molecular dynamics study of the micro-dynamic oxidation behavior of Ni-Al alloys

Exploring the oxidation mechanism of Ni3Al based alloy by ReaxFF molecular dynamics simulation

Formation and growth kinetics of the initial amorphous oxide film on the aluminum melt: A ReaxFF molecular dynamics simulation

Atomistic Insights into Interfacial Reactions of FeCr2O4 Oxide Films in High-Temperature Water

Initial oxidation of Fe-Al and Fe-Cr-Al alloys: Cr as an alumina booster

Oxygen adsorption, absorption and diffusion in FeCrNi medium entropy alloy: an ab initio study

Chemomechanical Finite Element Analysis for Surface Oxidation of Aluminum Alloy

Atomistic modeling of oxide-carbide growth on FeCr alloy surface in high-temperature CO2

Simulations on the oxidation of Al-Mg alloy nanoparticles using the ReaxFF reactive force field

On the surface chemisorption of oxidizing fine iron particles: Insights gained from molecular dynamics simulations

Molecular Dynamics Simulation of Fe-Based Metal Powder Oxidation during Laser Powder Bed Fusion

Microstructural and micromechanical characterization of intergranular oxidation in Fe-15Cr alloy

Strain-modulated Early Stage Oxidation of Fe Films

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy